This is fully programmable 30A BLDC ESC Circuit with 5V, 3A BEC. Can drive motors with continuous 30Amp load current. It has sturdy construction with 2 separate PCBs for Controller and Electronic Speed Controller power MOSFETs. It can be powered with 2-4 lithium Polymer batteries or 5-12 NiMH / NiCd..
If you are wandering to build a drone and don’t know what will be the best motor for you then worry no more, we have got your back. At Robu, we have everything for you to get started with your drone projectThese are the best low price drone motors available in the market.These are our market-crackin..
A 500 RPM DC Geared motor gives the mechanical throughput of 500RPM.A DC Geared motor is a simple DC motor with gear box attached to the shaft of the motor which is mechanically commutated electric motor powered from direct current (DC)Construction of Center Shaft Gear Box:On opening the outer plast..
A 30 RPM DC Geared motor gives the mechanical throughput of 30 RPM.A DC Geared motor is a simple DC motor with gear box attached to the shaft of the motor which is mechanically commutated electric motor powered from direct current (DC)Construction of Center Shaft Gear Box:On opening the outer plasti..
1000Kv Brushless Quadcopter Motors is a Brushless DC electric motor (BLDC motors) also known as electronically commutated motors (ECMs, EC motors) are synchronous motors that are powered by a DC electric source via an integrated inverter switching power supply, which produces an AC electric signal t..
The Small 3V DC Toy Motor gives the mechanical throughput of 150 RPM simply used in different robotics purposes.Features of Small 3V DC Toy Motor:Voltage: 3V to 6V.RPM: 150 rpm.Applications of Small 3V DC Toy Motor:These motors are normally used in toys, robotics purposes.Also Searched as: Small dc ..
This is a Side Shaft DC metal gear motor having 300 RPM. It is most suitable for medium weight robot running on average voltage. Motor runs smoothly from 9V to 12V and gives wide range of RPM, and torque.Features of 300 RPM Side Shaft Gear DC Motor:6mm shaft diameter with internal hole.125gm weight...
This is a Side Shaft DC metal gear motor having 10 RPM. It is most suitable for medium weight robot running on average voltage. . Drive shaft has clutch for non continuous protection from overload. Motor runs smoothly from 9V to 12V and gives wide range of RPM, and torque.Features of 10 RPM Side Sha..
The Johnson DC Gear motor offers custom engineering solutions based on a wide range of low voltage DC and high voltage DC motor platforms. The low voltage DC platform provides power density and compact packaging options.Features of 1000 RPM Johnson Gear DC Motor 12V:Rotations per minute: 1000 rpm wi..
The Johnsons DC Gear motor offers custom engineering solutions based on a wide range of low voltage DC and high voltage DC motor platforms. The low voltage DC platform provides power density and compact packaging options.Features of 60 RPM Johnson Gear DC Motor 12V:Rotations per minute: 60 rpm with ..
A DC motor clamp or a bracket is used to mount the motor tightly on any solid surface. Thus it increases the usability of the motor & makes motor mounting very convenient.Features of L Type BO Motor Clamp:Material: MS steel.Thickness: 2mm thick.Motor mounting side - Height 23 mm, width 22 mm;.Br..
The L298 Stepper Motor Driver Board Module For Arduino/Raspberry-pi/Robotics, using ST L298 chip can directly drive two DC motor, and provides a 5V output interface, support 5v and 3.3V MCU control, you can easily control the DC motor speed and direction, you can also control the 2-phase stepper mot..
ROBOMART makes a low-cost relay board shown above that contains both the relay and the required driver circuit built using a discrete transistor. The relay coils on this relay require around 6VDC. It is easier to drive relays like this that use a lower coil voltage. The relay can switch up to 220VAC..
This is fully programmable 20A BLDC ESC with 5V, 3A BEC. Can drive motors with continuous 20Amp load current. It has sturdy construction with 2 separate PCBs for Controller and ESC power MOSFETs. It can be powered with 2-4 lithium Polymer batteries or 5-12 NiMH / NiCd batteries. It has separate volt..
The L298 is an integrated monolithic circuit in a 15- lead Multiwatt and PowerSO20 packages. It is a high voltage, a high current dual full-bridge driver designed to accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC and stepping motors. Two enable inputs are pr..
This is a High Torque DC Motor 3500 RPM. It is most suitable for light weight robot requiring small power. This motor can be used with 69mm Diameter Wheel for Plastic Gear Motors and 87mm Diameter Multipurpose Wheel for Plastic Gear Motors. A DC motor is a mechanically commutated electric motor powe..
Chassis Board is the mechanical frame structure of the mobile robots. It should is the backbone of the robot. We arrange/connect everything like motors, sensors, wheels, development board, studs, clamps , screws, etc. of the robot to it.It give us the base to build our robot and allow us place our c..
A DC Geared motor is a simple DC motor with gear box attached to the shaft of the motor which is mechanically commutated electric motor powered from direct current (DC). This DC geared motor is centered shafted metal type motor having 150 rpm.Features of 150 RPM Center Shaft Metal Gear MotorGear mat..
This is a high torque DC gear motor providing 32Kg-cm torque. The motor generates a low RPM which is very ideal for making gripper to pick and place heavy objects with greater accuracy.Features of 150 RPM High Torque 12 Volt DC Gear Motor:150RPM 12V DC motors with Metal Gearbox and Metal Gears.18000..