Stepper Motors

A unipolar stepper motor has one winding with center tap per phase. Each section of windings is switched on for each direction of magnetic field. Since in this arrangement a magnetic pole can be reversed without switching the direction of current, the commutation circuit can be made very simple for ..

A stepper motor (or step motor) is a brushless DC electric motor that divides a full rotation into a number of equal steps. The motor's position can then be commanded to move and hold at one of these steps without any feedback sensor (an open-loop controller), as long as the motor is carefully sized..

Ideal Motor for CNC machines and 3D printer applications. Standard Nema23 frame size with pulley. 10 Kgcm bipolar mode torque with TB6560 Stepper Motor Drive. TB6560 Stepper Motor Drive, A CNC Router Single Axis 3A Stepper Motor driver board is for axis control with Input signal high-speed opto..

The stepper motors move in precisely repeatable steps, hence they are the motors of choice for the machines requiring precise position control. The NEMA17 3.5 kg-cm Stepper Motor can provide 3.5 kg-cm of torque at 1.2A current per phase.The motor’s position can be commanded to move or hold at one po..

This is a hybrid stepper motor with a 1.8° step angle. This type of motor moves in precise repeatable steps. That's why they are called the motor of choice. These are commonly used in machines that require precise position control. You can command this motor's position to move or hold in one positio..

Method : 2-2PDrive IC : UDN2916B-VSurge/Current : / 500 mA / Phase (Peak)Coil Resistance : 8.0 ΩMagnet Material : MS70MStator Material : SECCShaft Length: 12mmWire Length: 170 mm fly lead (connector)Wire Holder: RMZ ConnectorFront Plate: FPHElectrical: 24V, 600mABipolar Constant Current 8 ohms, MS70..

Package Include 1 x DC Stepper Motor. Motor Diameter: 42 MM; Height: 22. 8 MM; Weight: 127 g; Torque: 3. 5 Kg-cm Output shaft diameter: 3 MM; Shaft Length: 13mm Gear Diameter: 11mm, thickness: 6mm: Teeth: 12; Material: Metal Step angle: 7. 5 degrees; 2 Phase 4 Wire; 6V short circuit current: 1. 35 A..

Nema17 Bipolar. Brief Data:Number of Phase 2Step Angle: 1.8°.Phase Voltage: 2.6Vdc.Phase Current: 1.7A.Resistance/Phase: 1.5Ω ±10%.Inductance: 2.8mH ±20% (1KHz).Number of Wire: 4 (100cm Length).Holding Torque: 43Ncm.Shaft Diameter: Ø5mm.Motor Length: 40mm.Rotor Inertia: 54gcm2 .Temperature rise: 80°..

This 12V DC 345BYJ-46 Stepper Motor is a small, inexpensive, and high-quality geared step motor. The 35BYJ-46 Stepper Motor and ULN2003 Stepper Motor Driver is a widely popular combination of the stepper motor and stepper driver, because of the stability and reliability of the system. This 35BYJ-46 ..

5V 2A PCB Mount Telecom Relay - DPDT( Pack of 5) A relay is an electrically operated switch. It consists of a set of input terminals for a single or multiple control signals, and a set of operating contact terminals. The switch may have any number of contacts in multiple contact forms, such as ..

IRF530 MOSFET - 100V 17A N-Channel Power MOSFET TO-220 PackageIRF530 third generation power MOSFETs provide the designer with the best combination of fast switching, ruggedized device design, low on-resistance and cost-effectiveness. The TO-220AB package is universally preferred for all commercial-i..

NEMA17 3Kgcm Stepper Motor for high torque applications. Ideal Motor for ATM machines, 3D printers, Peristaltic pumps and job positioning and rotating applications. Standard NEMA 17 frame size 3Kgcm bipolar configurationFeatures:Stepper motor with 2mm pulley attached to shaft compatible with GT2 tim..

1000Kv Brushless Quadcopter Motors is a Brushless DC electric motor (BLDC motors) also known as electronically commutated motors (ECMs, EC motors) are synchronous motors that are powered by a DC electric source via an integrated inverter switching power supply, which produces an AC electric signal t..