Biometric / ECG / EMG Sensor
SKU: RM002416
Pulse Sensor Amped is a greatly improved version of the original Pulse Sensor, a plug-and-play heart-rate sensor for Arduino and Arduino compatibles. It can be used by students, artists, athletes, makers, and game & mobile developers who want to easily incorporate live heart-rate data into their..
₹ 165.20
(inc GST)₹ 140.00 ( + 18.00% Gst Extra )
SKU: RM003541
DescriptionEye Blinking Sensor For boards compatible with Arduino, Raspberry Pi, AVR, PICThis Eye Blink sensor senses the eyeblink using infrared. The Variation Across the eye will vary as per eye blink. If the eye is closed the output is high otherwise the output is low.Feature and Specification:EY..
₹ 259.60
(inc GST)₹ 220.00 ( + 18.00% Gst Extra )
SKU: RM002427
..
₹ 1,119.82
(inc GST)₹ 949.00 ( + 18.00% Gst Extra )
SKU: RM002425
Easy to stick to chest to pickup ECG signals.The center is filled with liquid electrode gel for good contact and pickup.Remove plastic backing sheet to expose the adhesive. Then affix to chest and connect wires to your ECG module for signal pickup.Gives good stablization and quick reading...
₹ 29.50
(inc GST)₹ 25.00 ( + 18.00% Gst Extra )
SKU: RM002464
The product is a USB Host which accepts any USB Mouse at its USB port and decodes the movement and button presses including scroll wheel. The data is output as serial TTL UART at 9600 baud rate for easy interfacing with various applications. The output is suitable for 3V or 5V level microcontroller ..
₹ 1,768.82
(inc GST)₹ 1,499.00 ( + 18.00% Gst Extra )
SKU: RM002462
Built in Blue LED and Buzzer to indicate successful reading.The barcode reader comes with a setup booklet for configuration. Read particular barcode from its booklet and it configures itself...
₹ 2,358.82
(inc GST)₹ 1,999.00 ( + 18.00% Gst Extra )
SKU: RM002395
The Analog Test Board is an accessory board includes an onboard Audio Power Amplifier LM386M, and two high-precision adjustable resistor used for adjusting input voltage level (0-3.3V, 2 channel), and a speaker for indicating the output voltage level by sound volume (1 channel).The board is ideal fo..
₹ 708.00
(inc GST)₹ 600.00 ( + 18.00% Gst Extra )
SKU: RM001372
Heart rate ear clip kit contain a ear clip and a receiver module. The heart rate measure kit can be used to monitor heart rate of patient and athlete. The result can be displayed on a screen via the serial port and can be saved for analysis. The entire system has a high sensitivity, low power consum..
₹ 1,298.00
(inc GST)₹ 1,100.00 ( + 18.00% Gst Extra )
SKU: RM009723
LFS1305 CLASS C / F0.6 Conductivity Sensor 100 µS/cm to 200 mS/cm 100 Hz to 10 kHz 0.3 mA 4 Electrode Conductivity Sensor can be used for various conductivity measurement applications.Features:1. Wide conductivity and temperature range ▪ Excellent long-term stability2. Fast response time3. Int..
₹ 2,999.01
(inc GST)₹ 2,541.53 ( + 18.00% Gst Extra )
SKU: RM009722
The length of the cable is ~80 cm. The SHIELD-EKG-EMG-PRO unit does not include gel pads/gel electrodes. They have to be purchased separately. The Red header is left, the white header is right, the black header is DRL (feedback).Custom molded and labeled Cable for Gel ECG Electrodes for use with Oli..
₹ 1,315.91
(inc GST)₹ 1,115.18 ( + 18.00% Gst Extra )
SKU: RM009721
This is ECG-GEL-Electrode (3M). The range of traditional style monitoring electrodes, backings, and adhesives, for the normal or diaphoretic skin. Our low chloride solid gels provide excellent trace quality, combined with low skin irritation.The 3M Red Dot Adult Solid Gel Electrode provides a secure..
₹ 1,052.51
(inc GST)₹ 891.96 ( + 18.00% Gst Extra )
SKU: RM009720
This is ECG GEL Electrode (3M). The range of traditional style monitoring electrodes, backings, and adhesives, for the normal or diaphoretic skin. Our low chloride solid gels provide excellent trace quality, combined with low skin irritation.The 3M Red Dot Adult Solid Gel Electrode provides a secure..
₹ 72.70
(inc GST)₹ 61.61 ( + 18.00% Gst Extra )
SKU: RM009719
This is a passive electrode for a SHIELD-EKG-EMG shield which allows Arduino like boards to capture Electrocardiography Electromyography signals. The SHIELD-EKG-EMG-PASSIVE opens new possibilities to experiment with biofeedback. You can monitor your heartbeat and log your pulse, recognize gestures b..
₹ 1,315.91
(inc GST)₹ 1,115.18 ( + 18.00% Gst Extra )
SKU: RM009718
If you are in the situation of searching for a fingerprint Reader board at a low cost for your DIY project, or if you need to present a complex circuit with the sensor. So, here is the Waveshare Capacitive Fingerprint Reader that will be beneficial for you to build your project within budget.Wavesha..
₹ 3,949.00
(inc GST)₹ 3,346.61 ( + 18.00% Gst Extra )
SKU: RM009717
UART Fingerprint Reader is a fingerprinting module designed for secondary development, high-speed for identification, high stability. It is an intelligent module that provides functionalities like fingerprint recording, image processing, feature extraction, template generation, template storage, fin..
₹ 5,878.00
(inc GST)₹ 4,981.36 ( + 18.00% Gst Extra )
SKU: RM009716
Grove – GSR Sensor stands for galvanic skin response and it is a method of measuring the electrical conductance of the skin. It can be used to reflect the human emotional activity. When we are emotionally stressed or have strong expressions on the face, sympathetic activity increases and promotes th..
₹ 999.00
(inc GST)₹ 846.61 ( + 18.00% Gst Extra )
SKU: RM009715
The Grove – Capacitive Fingerprint Scanner is based on the KCT203 Semiconductor fingerprint recognition module, including a high-performance MCU, a vertical RF push-type fingerprint sensor, and a touch sensing device. This module features many advantages such as small size, small fingerprint templat..
₹ 2,449.00
(inc GST)₹ 2,075.42 ( + 18.00% Gst Extra )
SKU: RM009714
This is the R307 Optical Fingerprint Reader Sensor Module. R307 fingerprint module is a fingerprint sensor with a TTL UART interface for direct connections to microcontroller UART or to PC through MAX232 / USB-Serial adapter. The user can store the fingerprint data in the module and can configure it..
₹ 1,058.00
(inc GST)₹ 896.61 ( + 18.00% Gst Extra )
SKU: RM009713
This is an R305 Fingerprint Identification Module with a TTL UART interface for direct connections to microcontroller UART or to PC through MAX232 / USB-Serial adapter.The user can store the fingerprint data in the module and can configure it in 1:1 or 1: N mode for identifying the person. The FP mo..
₹ 2,121.00
(inc GST)₹ 1,797.46 ( + 18.00% Gst Extra )
SKU: RM009712
This is an R305 Fingerprint Identification Module with a TTL UART interface for direct connections to microcontroller UART or to PC through MAX232 / USB-Serial adapter.The user can store the fingerprint data in the module and can configure it in 1:1 or 1: N mode for identifying the person. The FP mo..
₹ 1,897.00
(inc GST)₹ 1,607.63 ( + 18.00% Gst Extra )