Programming Module
SKU: RM009601
ST-Link V2 Programmer For STM8 and STM32 is fully consistent with the official version, support for automatic upgrades, support the full range STM32 SWD (only 4pins including SWCLK, SWDIO, and power) and a full range STM8 SWIM (only 4pins including SWIM, Reset and power) download and debug.Use this ..
₹ 234.82
(inc GST)₹ 199.00 ( + 18.00% Gst Extra )
SKU: RM006682
The USB ASP AVR Programming Device for ATMEL processors is a USB in-circuit programmer for Atmel AVR controllers. USB ASP AVR Programming Device for ATMEL Processors simply consists of an ATMega88 or an ATMega8 and a couple of passive components. The programmer uses a firmware-only USB driver; no sp..
₹ 295.00
(inc GST)₹ 250.00 ( + 18.00% Gst Extra )
SKU: RM004561
The PIC K150 USB Automatic Develop Microcontroller Programmer With ICSP Cable is a low-cost high-performance PIC programmer. This supports the most popular PIC chips, programmed, readout, encryption, use of high-speed USB communication, and fast programming.The programming quality is stable and reli..
₹ 758.74
(inc GST)₹ 643.00 ( + 18.00% Gst Extra )
SKU: RM004559
This is ICSP Programmer Socket – UIC-S. The UIC-S is a socket for UIC00A/B, USB ICSP PIC Programmer. Combine with UIC00A/B, the user will get a standalone USB programmer. The 40-pin ZIF (Zero Insert Force) socket provide an easy to plug and unplug PIC during development (download program).It support..
₹ 348.10
(inc GST)₹ 295.00 ( + 18.00% Gst Extra )
SKU: RM009625
The UNC-A (Universal ICSP Adapter) ICSP Universal Socket is a programmer’s output socket adapter. It is compatible with Cytron UIC00 programmer, Microchip PICkit programmer and Microchip In-Circuit Debugger.Each of them has their own standard connection. To ease user, Cytron has created this UIC-A s..
₹ 366.00
(inc GST)₹ 310.17 ( + 18.00% Gst Extra )
SKU: RM009604
This is PICkit3 Debugger Programmer Emulator Controller Development board w/ Pinout diagram to ease the customer. The USB connection is more stable than ICD2.PICKIT3.5, begin to support Win7 system. Full patch design, patch through the reflow soldering processing, more stable quality. PIC developing..
₹ 3,002.00
(inc GST)₹ 2,544.07 ( + 18.00% Gst Extra )
SKU: RM006675
This USB to UART/ESP8266 Adapter Programmer for ESP-01 WiFi Modules with CH340G Chip converts the signal from a USB interface to a PC / laptop to match a serial module ESP8266. This converter module has CH340 chip which is reliable and with high performance. It is compatible with most Windows system..
₹ 70.80
(inc GST)₹ 60.00 ( + 18.00% Gst Extra )
SKU: RM006672
The USB to RS485 TTL Serial Converter Adapter FT232 is USB2.0 standard, backward compatible, in line with the standard RS485. It has Direction control with use of automatic data flow control, auto distinguish and control data transfer direction with Baud rate of 300-9216000bps and automatically dete..
₹ 186.44
(inc GST)₹ 158.00 ( + 18.00% Gst Extra )
SKU: RM006671
The USB to RS485 Converter Adapter module support WIN7 XP Vista Linux Mac OS provides an easy to use RS485 interface by means of a Virtual Com Port on the user’s system. There are no command structures, whatever is sent to the Virtual Comm Port is automatically converted to RS485 and vice vers..
₹ 84.96
(inc GST)₹ 72.00 ( + 18.00% Gst Extra )
SKU: RM006670
The USB PIC Programmer – UP00B is the enhanced version of UP00A. As PIC MCU is gaining its popularity in the market for student and hobbyist, more low cost and the user-friendly programmer is needed.Previous USB PIC Programmer, UP00A is obsolete because it cannot support Windows Vista, fail to progr..
₹ 3,307.54
(inc GST)₹ 2,803.00 ( + 18.00% Gst Extra )
SKU: RM006667
USB Blaster ALTERA CPLD/FPGA programmer Supports 1.5V,1.8V,2.5V,3.5V and 5.0V as well as all ALTERA products like CPLD ( MAX3000, MAX7000, MAX9000 and MAX II ) ; FPGA ( Stratix, StratixII, Cyclone, CycloneII, ACEX 1K, APEX20K and FLEX 10K ), Cyclone (EP1C3, EP1C6, EP1C12, EP1C20) ; Cyclone II (EP2C5..
₹ 276.12
(inc GST)₹ 234.00 ( + 18.00% Gst Extra )
SKU: RM006665
By using the TTL FTDI Transmitter USB For 3.3V 5V dual power FT232RLFTDI MWC Programmer, you can easily install your project or product into a USB interface. The cs2102 is an SI labs product that can communicate (for example, the Arduino multiview 2.5 is the same as the GPS in the APM pack and any o..
₹ 195.88
(inc GST)₹ 166.00 ( + 18.00% Gst Extra )
SKU: RM006642
This EZ-USB FX2LP CY7C68013A USB Development Board Logic Analyzer provides an ideal tool for learning about the Cypress EZ-USB FX2LP Microcontroller. This development board breakout all the GPIO of the microcontroller; so it will be very convenient for learners to expand their own design. It also us..
₹ 508.58
(inc GST)₹ 431.00 ( + 18.00% Gst Extra )
SKU: RM006631
This low-cost mini USB CH341A 24 25 Series EEPROM Flash BIOS USB Programmer is intended to support 24 EEPROM and 25 SPI flash 8pin/16 pin chip. It is equipped with CH 341A chip, can automatically recognize 25 series chip, and its 24/25 series indicator lamp enables the user to easily recognize modul..
₹ 226.56
(inc GST)₹ 192.00 ( + 18.00% Gst Extra )
SKU: RM010092
This is 10 Pin to 6 Pin Adapter Board AVR ISP USBASP STK500. The standard 10PIN programmer can be used to interface to standard 6PIN Interface Converter. AVR MCU development board can be used to download Interface Converter and also an Arduino development board can be used for the ISP in..
₹ 39.00
(inc GST)₹ 33.05 ( + 18.00% Gst Extra )
Showing 1 to 15 of 15 (1 Pages)