Brushed/Stepper DC Motor Driver
SKU: RM000056
L298 is an integrated monolithic circuit in a 15 - lead Multiwatt and PowerSO20 packages. It is a high voltage, high current dual full-bridge driver designed to accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC and stepping motors. Two enable inputs are provide..
₹ 110.00
( + 18% Gst Extra )₹ 129.80 (Inc GST)
SKU: RM002376
..
₹ 69.00
( + 18% Gst Extra )₹ 81.42 (Inc GST)
SKU: RM002192
..
₹ 250.00
( + 18% Gst Extra )₹ 295.00 (Inc GST)
SKU: RM002188
..
₹ 170.00
( + 18% Gst Extra )₹ 200.60 (Inc GST)
SKU: RM000663
The TB6612FNG is a motor driver IC for DC motor with output transistor in LD MOS structure with low ON-resistor. Two input signals, IN1 and IN2, can choose one of four modes such as CW, CCW, short brake, and stop mode.Features:Power supply voltage; VM = 15 V(Max).Output current; IOUT=1.2 A(ave) / 3...
₹ 199.00
( + 18% Gst Extra )₹ 234.82 (Inc GST)
-34 %
SKU: RM000445
This driver uses Infineon chips BTS7960 composed of high power drive full H-bridge driver module with thermal over current protection. Double BTS 7960 H-bridge driver circuit, with a strong drive and braking, effectively isolating the microcontroller and motor driver! High current 43A.Features:Doubl..
₹ 330.00 ₹ 499.00
( + 18% Gst Extra )₹ 389.40 (Inc GST)
SKU: RM000055
L293D is quadruple high-current half-H driver.The L293 is designed to provide bidirectional drive currents of up to 1 A at voltages from 4.5 V to 36 V. The L293D is designed to provide bidirectional drive currents of up to 600-mA at voltages from 4.5 V to 36 V. Both devices are designed to drive ind..
₹ 45.00
( + 18% Gst Extra )₹ 53.10 (Inc GST)
SKU: RM018054
Product Description:COMPATIBLE WITH ARDUINO, RASPBERRY PI, ARM, AVR, PIC, 8051, etcThis Motor Driver Board is designed to Work with L293D IC. The L293D is a popular motor driver IC designed to provide bidirectional drive currents of up to 600-mA at voltages from 4.5 V to 36 V.Compact L293D Moto..
₹ 65.00
( + 18% Gst Extra )₹ 76.70 (Inc GST)
SKU: RM013585
3V 6V 12V 24V 35V PWM DC Motor Speed Regulator is a Mini Style DC Motor Speed Regulator controls the speed of a DC motor by adjusting Pulse-Width-Modulated (PWM).Precautions:DC motor governor input is DC, can not directly connect to the AC (for example home 220V AC), otherwise, it will burn!DC power..
₹ 190.00
( + 18% Gst Extra )₹ 224.20 (Inc GST)
SKU: RM013579
The DC Motor Speed Controller allows controlling direction of a DC motor using a Pulse-Width-Modulated (PWM) DC voltage with a Duty Cycle fully adjustable from 10%-100%. The motor speed controller can provide a continuous current of 8A to your DC motor or other DC load. The circuit also includes a 1..
₹ 150.00
( + 18% Gst Extra )₹ 177.00 (Inc GST)
SKU: RM013578
This 1203B PWM 6V 12V 24V 28V 3A DC Motor Speed Regulator allows controlling the speed of a motor with fully adjustable 0%-100%. The motor speed controller can easily provide a continuous current of 3A to your DC motor or other DC load.Application:This PWM Speed controller is for DC 6V 12V 24V 28V M..
₹ 98.00
( + 18% Gst Extra )₹ 115.64 (Inc GST)
SKU: RM009110
The DM542 Digital Stepper Motor Driver is an economical micro-stepping driver based on the patented technology. It is suitable for driving 2-phase and 4-phase hybrid stepping motors.By using the advanced bipolar constant-current chopping technique, it can output more speed and torque from the same m..
₹ 1,049.00
( + 18% Gst Extra )₹ 1,237.82 (Inc GST)
SKU: RM009100
TB6600 Arduino Stepper Motor Driver is an easy-to-use professional stepper motor driver, which could control a two-phase stepping motor. It is compatible with Arduino and other microcontrollers that can output a 5V digital pulse signal.TB6600 Arduino stepper motor driver has a wide range of power in..
₹ 465.00
( + 18% Gst Extra )₹ 548.70 (Inc GST)
SKU: RM000032
Dual H-Bridge Power Transistor Motor Driver Arduino Board is a simple motor driver used to drive high power dc motor which is both the combination of two NPN & PNP (TIP-122 & TIP-127) transistors to operate dual motor at a time in bidirectional.Features of Dual H-Bridge Power Transistor Moto..
₹ 349.00
( + 18% Gst Extra )₹ 411.82 (Inc GST)
SKU: RM000024
The L298 dual full-bridge motor driver board for Arduino/Raspberry-pi,uses double H driver ic L298 which an integrated monolithic circuit in a 15 - lead Multi watt and Power SO20 packages. It is a high voltage, high current dual full-bridge driver designed to accept standard TTL logic levels and dri..
₹ 229.00
( + 18% Gst Extra )₹ 270.22 (Inc GST)
SKU: RM001140
The Motor driver is based on the diode basis, which is a Half-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepping motors. It lets you drive two DC motors with your Robomart Arduino board, controlling the speed and direction of each one independently. You can al..
₹ 249.00
( + 18% Gst Extra )₹ 293.82 (Inc GST)
SKU: RM001138
The ULN2803 Stepper Motor driver is ideal for driving a stepper motor through Arduino or any other platform.Specification of ULN2803 Stepper Motor Driver Board:500mA drain per channel.Up to 50V Output Voltage.Output Clamp Diodes.Medium Power Stepper Motor Application.Applications of ULN2803 Stepper ..
₹ 299.00
( + 18% Gst Extra )₹ 352.82 (Inc GST)
SKU: RM001084
ROBOMART makes a low-cost relay board shown above that contains both the relay and the required driver circuit built using a discrete transistor. The relay coils on this relay require around 6VDC. It is easier to drive relays like this that use a lower coil voltage. The relay can switch up to 220VAC..
₹ 130.00
( + 18% Gst Extra )₹ 153.40 (Inc GST)
SKU: RM000942
The L293D is a Monolithic Integrated, High Voltage, High Current, 4-Channel Driver module. Basically you can use DC Motors and Power Supplies of up To 36 Volts, That’s Some Pretty Big Motors and the chip can supply a maximum current Of 600Ma Per Channel, The L293D Chip Is Also What’s known as a type..
₹ 199.00
( + 18% Gst Extra )₹ 234.82 (Inc GST)
SKU: RM000162
The L298 Stepper Motor Driver Board Module For Arduino/Raspberry-pi/Robotics, using ST L298 chip can directly drive two DC motor, and provides a 5V output interface, support 5v and 3.3V MCU control, you can easily control the DC motor speed and direction, you can also control the 2-phase stepper mot..
₹ 99.00
( + 18% Gst Extra )₹ 116.82 (Inc GST)