A Long Shaft DC motor is a mechanically commutated electric motor powered from direct current (DC). The stator is stationary in space by definition and therefore its current. The current in the rotor is switched by the commutator to also be stationary in space. This is how the relative angle between..
A stepper motor (or step motor) is a brushless DC electric motor that divides a full rotation into a number of equal steps. The motor's position can then be commanded to move and hold at one of these steps without any feedback sensor (an open-loop controller), as long as the motor is carefully sized..
This is a Side Shaft DC metal gear motor having 45 RPM. It is most suitable for medium weight robot running on average voltage. . Drive shaft has clutch for non continuous protection from overload. Motor runs smoothly from 9V to 12V and gives wide range of RPM, and torque.Features of 45 RPM Side Sha..
This is a Side Shaft DC metal gear motor having 6 RPM. It is most suitable for medium weight robot running on average voltage. Drive shaft has clutch for non continuous protection from overload. Motor runs smoothly from 9V to 12V and gives wide range of RPM, and torque.Features of 6 RPM Side S..
The Johnsons DC Gear motor offers custom engineering solutions based on a wide range of low voltage DC and high voltage DC motor platforms. The low voltage DC platform provides power density and compact packaging options.Features of 30 RPM Johnson Gear DC Motor 12V:Rotations per minute: 30 rpm with ..
This is a side shaft metal gear motor clamp used in different robotics applications.Features of Side Shaft Metal Gear Motor Clamp:Material: MS steel.Thickness: 2mm thick.Motor mounting side - Height 39 mm, width 39 mm.Bracket mounting side - Height 39 mm, width 39 mm.Hole for Motor mounting: 1- 27mm..
A DC Geared DC motor is a simple DC motor with gear box attached to the shaft of the motor which is mechanically commutated electric motor powered from direct current (DC).Features of 150 RPM Rectangle Single Shaft Plastic Gear BO Motor For Gear materials: Plastic.Motor types: Permanent-magnet.Brush..
Ideal Motor for CNC machines and 3D printer applications. Standard Nema23 frame size with pulley. 10 Kgcm bipolar mode torque with TB6560 Stepper Motor Drive. TB6560 Stepper Motor Drive, A CNC Router Single Axis 3A Stepper Motor driver board is for axis control with Input signal high-speed opto..
L293D is quadruple high-current half-H driver.The L293 is designed to provide bidirectional drive currents of up to 1 A at voltages from 4.5 V to 36 V. The L293D is designed to provide bidirectional drive currents of up to 600-mA at voltages from 4.5 V to 36 V. Both devices are designed to drive ind..
A DC Geared DC motor is a simple DC motor with gear box attached to the shaft of the motor which is mechanically commutated electric motor powered from direct current (DC).Features of 10 RPM Center Shaft Metal Gear DC Motor Gear materials: metal.Magnet types: permanent-magnet.Brush-type: Brush.Motor..
3-6V DC Double Nozzle Submersible Mini Motor Water Pump for DIY Projects, Mini Water Falls, Fish Tank and Automatic Hand Sanitizer Dispenser 52X23mmSpecifications:Continuous Working Life : 700 hoursFlow Rate : 60 ~ 120 L/HDriving Mode : DCOperating Voltage : 3 ~ 6VMaximum Lift : 200-300 mmLight Weig..
This arduino motor drive shield allows driving two channel DC motors. It uses a L298N chip which deliveries output current up to 2A each channel. The speed control is achieved through conventional PWM which can be obtained from Arduino’s PWM output Pin 5 and 6. The enable/disable function of the mot..
The Futaba S3003 Plastic Geared Servo Motor is a decent servo for every hobbyist and electronics student. The powerful motor is PWM controlled for easy interfacing.Features of Futaba S3003 Servo Motor 3.2 KG Torque.Control System: +Pulse Width Control 1520usec NeutralRequired Pulse: 3-5 Volt Peak to..
This DC motor is of non gear type motor having 35000 rpm.Features of 35000 RPM 12V DC Motor:Rated voltage:12V.No-Load Speed:35000±10% RPM/MIN; No-Load Current: 0.85A.Diameter 38.5mm.Length 57mm.Shaft 3.17mm.Weight: 255g(APPROX).Applications of 35000 RPM 12V DC Motor:Printer.Automotive Products.Rear ..
The Johnsons DC Gear motor offers custom engineering solutions based on a wide range of low voltage DC and high voltage DC motor platforms. The low voltage DC platform provides power density and compact packaging options.Features of 100 RPM Johnson Gear DC Motor 12V:Rotations per minute: 100 rpm wit..
This is an L-Type Clamp for central shaft metal gear motor used in different robotics applications.Features of L Type Central Shaft Metal Gear Motor Clamp:Material: MS steel.Thickness: 2mm thick.Motor mounting side - Height 39 mm, width 39 mm;.Bracket mounting side - Height 22 mm, width 39 mm.Hole f..
Mini Fan Suitable for DC Toy Motor (3-6VDC). This fan blade is Made up of light weight Plastic. This is a plastic toy fan for general, education, project purpose. This is suitable with a dc toy motor so you can use it with a motor according to your need. This fan is made of plastic so it is long-las..