Generic

Gear parts are used when large gear reductions are needed. It is common for Gear parts to have reductions of 20:1, and even up to 300:1 or greater.Many Gear parts have an interesting property that no other gear set has: the worm can easily turn the gear, but the gear cannot turn the worm. This is be..

This is a High Torque DC Motor 3500 RPM. It is most suitable for light weight robot requiring small power. This motor can be used with 69mm Diameter Wheel for Plastic Gear Motors and 87mm Diameter Multipurpose Wheel for Plastic Gear Motors. A DC motor is a mechanically commutated electric motor powe..

Chassis Board is the mechanical frame structure of the mobile robots. It should is the backbone of the robot. We arrange/connect everything like motors, sensors, wheels, development board, studs, clamps , screws, etc. of the robot to it.It give us the base to build our robot and allow us place our c..

Chassis Board is the mechanical frame structure of the mobile robots. It should is the backbone of the robot. We arrange/connect everything like motors, sensors, wheels, development board, studs, clamps , screws, etc. of the robot to it.It give us the base to build our robot and allow us place our c..

INGCO 5pcs Masonry Drill Bits Set – AKDB3055 :Masonry Drill Bit Set.Material High Grade Steel.Sizes: 4x75mm, 5x85, 6x100mm, 8x120mm & 10x120mm...

A 10 Watt Soldering Iron  is a hand tool used in soldering. It supplies heat to melt the solder so that it can flow into the joint between two workpieces. A soldering iron is composed of a heated metal tip and an insulated handle. Heating is often achieved electrically, by passing an electric c..

9 x 15CM Universal PCB Prototype Board Double-Side :This is 9 x 15CM Universal PCB Prototype Board Double-Side High-quality universal prototyping board with standard 0.1″ spacing through holes.High-quality 4×6 cm FR4 material, Double sided, HASL, NC CNC drilled...

5600pF/5.6nF/0.0056uF 562 Ceramic Capacitor (Pack of 20)Introducing our 5600pF (562) Ceramic Capacitor Pack, the perfect solution for your electronic projects! This pack includes 30 high-quality ceramic capacitors, each rated at 5600pF (562) to ensure excellent performance and reliability in a varie..

2.2 uH Color Ring DIP InductorColor Ring DIP Inductor is a small lightweight inductor. Its compact design is ideal to use in electronic devices. The inductor has a coating of epoxy resin which is resistant to humidity and thus improves the life of the same.Additionally, this inductor has relatively ..

A DC Geared motor is a simple DC motor with gear box attached to the shaft of the motor which is mechanically commutated electric motor powered from direct current (DC). This DC geared motor is centered shafted metal type motor having 150 rpm.Features of 150 RPM Center Shaft Metal Gear MotorGear mat..

2.4" Inch TFT LCD Shield is a Touch Panel Module used in different embedded projectFeatures of 2.4 Inch TFT LCD:2.4" (diagonal) LCD TFT display.Bright, 4 white-LED backlight, on by default but you can connect the transistor to a digital pin for backlight control.Colorful, 18-bit 262,000 different sh..

These diffused white LED are used in different applications.Features of 10 mm White Diffused Light Emitting LED:Forward Voltage: 3.0-3.4V.Package Type: Through Hole.Max. Forward Current: 20mA.Emitting color: white led dip diode.Luminous lux: 25000-30000 mcd.Color temperature: 2800-3500k.Life time: 1..

The MFRC522 is a highly integrated RF frequency reader/writer IC for contact less communication at 13.56 MHz. The MFRC522 reader supports ISO/IEC 14443 A/MIFARE mode.Features :Current :13-26mA / DC 3.3V.Idle Current :10-13mA / DC 3.3V.Sleep current: < 80uA.Peak current: < 30mA.Operating Freque..

This is a high torque DC gear motor providing 32Kg-cm torque. The motor generates a low RPM which is very ideal for making gripper to pick and place heavy objects with greater accuracy.Features of 150 RPM High Torque 12 Volt DC Gear Motor:150RPM 12V DC motors with Metal Gearbox and Metal Gears.18000..

A Rack and Pinion is a type of linear actuator that comprises a pair of gears which convert rotational motion into linear motion.Features of Pinion Gear:It has a Root diameter of 3.50 cm.There are 58 tooth.Outer diameter of the pinion is 3.80 cm.Whole depth of the Pinion is 1.00 mm.aThe tooth distan..

Worm gears are used when large gear reductions are needed. It is common for worm gears to have reductions of 20:1, and even up to 300:1 or greater.Features of Worm Plastic Gear:Pitch Diameter=4 0 mm.Length= 32mm.Center Shaft Diameter= 6 mm.Features of Worm Plastic Gear:Gate control mechanisms.Hoisti..

A gear is a rotating machine part having cut teeth, or cogs, which mesh with another toothed part in order to transmit torque, in most cases with teeth on the one gear of identical shape, and often also with that shape on the other gear.Features of 25T Plastic Gear:No. of Teeths= 25.Diameter= 40 mm...

DT-266 AC DC Digital Clamp Multimeter Auto Ranging Amp Current Voltage Measurement Device Ammeter Tong Tester with LCD DisplayAuto ranging clamp multimeter can be used to measure AC and DC Voltage, AC Current, Resistance, Diode test, Data Hold, Max Value Hold. troubleshoot electrical problems safely..