The micro mouse sensor having consists of 6 IR sensor for perfect angle rotation which is very easy of operating micro mouse robot.Features of Micro Mouse Sensor:Micro Mouse Sensor For Arduino/6 sensors for better positioning in maze.ADC output for for distance measurement.12 cm of range for each se..
The Hall effect sensor is a transducer that varies its output voltage in response to a magnetic field.Features of Hall Effect Sensor:Such a switch costs less than a mechanical switch and is much more reliable.It can be operated up to 100 kHz.It does not suffer from contact bounce because a solid sta..
IR Based Analog Color Sensor Pair is a simple and effective device as a analog sensor. These sensors can be used as an Obstacle Sensor, Edge Sensor, Color Sensor (Multi-color), Light Sensor, Line Sensor, etc. It comes without any inbuilt Dual Operational Amplifier IC that converts the Analog voltage..
The Hall Effect sensor is a transducer that varies its output voltage in response of a magnetic field. Hall Effect sensors are used for proximity switching, positioning, speed detection, and current sensing applications. In its simplest form, the sensor operates as an analog transducer, directly ret..
The Double Array TSOP IR Obstacle Sensor consist of a TSOP as a receiver and IR LED as a transmitter. TSOP as a receiver provides flexibility of sensing light. The sensor is perfectly suited for Detecting obstacle within line of sight.Features of Double Array TSOP IR Obstacle Sensor:Ease to use.Read..
The Color light sensors are awesome devices for everything from environmental sensors to general robotics. They can be used to monitor slowly changing events like algae blooms or leaf death, or to determine light absorption through a medium. But for all their utility, they have some flaws. First off..
The ACS712 is a Fully Integrated, Hall Effect-Based Linear AC/DC Current Sensor with 2.1 kV RMS Voltage Isolation and a Low-Resistance Current Conductor.Features of 5AMP Hall Current Sensor Module:Low-noise analog signal path.5 µs output rise time in response to step input current.50 kHz bandwidth.T..
The alcohol gas sensor detects the concentration of alcohol gas in the air and outputs its reading as an analog voltage. The concentration sensing range of 0.04 mg/L to 4 mg/L is suitable for breathalyzers. The sensor can operate at temperatures from -10 to 50°C and consumes less than 150 mA at 5 V...
2 Axis Pan Tilt Camera Mount For Camera/Sensors is a servo based 2 axis pan and tilt mechanism for mounting wireless/ wired camera and sensors on robot assembly. Panning , rolling and tilting is achieved by controlling Servo motors using PPM pulses. Suitable for DIY panning and tilting application i..
LM35 series Temperature Sensors is a precisely integrated circuit whose voltage output is linearly proportional to the centigrade temperature.Features of LM 35 Temperature Sensors :Calibrated Directly in Celsius (Centigrade).Linear + 10-mV/°C Scale Factor.0.5°C Ensured Accuracy (at 25°C).Rated for F..
This is a sliding type potentiometer whose resistance can adjustable.Features of Sliding Adjustable Potentiometer Module:Two analog outputs, analog outputs 0-VCC voltage signals.Size: 90 * 20mm.Voltage: 3.3V or 5V.Port: Analog.Resistance: 10K.10 X Slide potentiometers module.Applications of Sliding ..
The Light Sensor generates an output signal indicating the intensity of light by measuring the radiant energy that exists in a very narrow range of frequencies basically called “light”, and which ranges in frequency from “Infra-red” to “Visible” up to “Ultraviolet” light spectrum.Features of Light S..
DS18B20 Temperature Sensor Module is a digital temperature sensor, and you can easily connect it to Arduino with only one 4.7-pound resistor, base 1 – Ground 2 – Output – Base 3 to the positive of the source, with resistance to base 2 Is connected. The connection of this sensor to the Arduino via th..
This is a light based Digital Proximity sensor. These sensors can be used to sense light in a region. It comes with inbuilt Dual Operational Amplifier IC that converts the Analog voltage signal into Digital Signal making it perfectly suitable for Micro Controller / Processor Interfacing.It consist o..
The 9 axis sensor module is a combination of 3 axis gyroscope + 3 accelerometer + 3 axis magnetic field (ITG3205 + ADXL345 + HMC5883L) Immersion on a PCB. It will be interface with the microcontroller with I2C protocol.Features of 9 Axis Sensor Module ITG3205 + ADXL345 + HMC5883L:9 axis module (3 ax..
Sensor composed by micro AL2O3 ceramic tube, Tin Dioxide (SnO2) sensitive layer, measuring electrode and heater are fixed into a crust made by plastic and stainless steel net. The heater provides necessary work conditions for work of sensitive components. The enveloped RM0703 have 6 pin, 4 of them a..
Descriptions:The A101 is our smallest sensor optimized for high volume manufacturing and ideal for embedding into products. The 2-pin sensors are currently our smallest standard sensor.The sensors can measure up to 10 lbs. The dynamic range of this mini force sensor can be modified by changing the d..
It is an IR based proximity Sensor Array that provides 5 Bit of Digital output based on the Surface sensed by the sensors. The array is a group of 5 IR sensors which sense precisely the changes and provides a perfectly differentiate input values for constructing an intelligent Robot.Features of Five..
The MQ7 sensor module which detects the concentrations of CO in the air and outputs its reading as an analog voltage. The sensor can measure concentrations of 10 to 10,000 PPM. The sensor can operate at temperatures from -10 to 50°C and consumes less than 150 MA at 5 V.Features of MQ7 Carbon Monoxid..
The MPU-6050 sensor module contains an accelerometer and a gyro in a single chip. It is very accurate, as it contains 16-bits analog to digital conversion hardware for each channel. Therefore it captures the x, y, and z channel at the same time. The sensor uses the I2C-bus to interface with the Ardu..