All Categories
Your Cart

Interface ICs

Interface ICs, also known as communication ICs, are essential integrated circuits that facilitate communication and data exchange between different electronic components and systems. These versatile components provide reliable and efficient interfaces for various communication protocols, enabling seamless interoperability and connectivity.

Interface ICs support standards such as UART, SPI, I2C, USB, Ethernet, and CAN, among others, allowing for the transfer of data, control signals, and power between devices. These ICs play a crucial role in applications such as embedded systems, IoT devices, industrial automation, and communication networks.

Discover an extensive assortment of Semiconductor ICs, encompassing a wide variety of options such as MOSFET ICs, Logic Gate ICs, Comparator ICs, Driver ICs, Memory ICs, and more. Explore our comprehensive range of Semiconductor ICs to find the perfect fit for your specific application needs.

SKU: RM002756
HT648L 24-DIP ICThe 318 decoders are a series of CMOS LSIs for remote control system applications. They arepaired with the 318 series of encoders. For proper operation a pair of encoder/decoder pairwith the same number of address and data format should be selected (refer to the encoder/decoder cross..
₹ 199.00
SKU: RM000064
The FT232R USB UART Driver IC is a device which simplifies USB to serial designs and reduces external component count by fully integrating an external EEPROM, USB termination resistors and an integrated clock circuit which requires no external crystal, into the device. It has been designed to operat..
₹ 199.00
SKU: RM000063
The PL-2303 operates as a bridge between one USB port and one standard RS232 Serial port. The two large on-chip buffers accommodate data flow from two different buses. The USB bulk-type data is adopted for maximum data transfer. Automatic handshake is supported at the Serial port. With these, a much..
₹ 180.00
SKU: RM017785
This 40-V, 0.79-mΩ, SON 5-mm × 6-mm NexFET™ power MOSFET has been designed to minimize losses in power conversion applications.Applications:DC-DC ConversionSecondary Side Synchronous RectifierMotor ControlNote:For more info refer to datasheet in attachment section.Actual product may vary from image ..
₹ 143.00
SKU: RM017784
PL2303HX SSOP28 USB-to-Serial Bridge Controller IC provides a convenient solution for connecting an RS232-like full-duplex asynchronous serial device to any Universal Serial Bus (USB) capable host. PL-2303HXA highly compatible drivers could simulate the traditional COM port on most operating systems..
₹ 72.00
SKU: RM017783
PL2303HX SSOP28 USB-to-Serial Bridge Controller IC provides a convenient solution for connecting an RS232-like full-duplex asynchronous serial device to any Universal Serial Bus (USB) capable host. PL-2303HX highly compatible drivers could simulate the traditional COM port on most operating systems ..
₹ 66.00
SKU: RM017782
The MCT6 is a two-channel optocoupler for high-density applications. Each channel consists of an optically coupled pair with a gallium arsenide infrared LED and a silicon NPN phototransistor. Signal information, including a DC level, can be transmitted by the device while maintaining a high degree o..
₹ 49.00
SKU: RM017781
The MAX485 are low-power transceivers for RS-485 and RS422 communication. Each part contains one driver and one receiver.  The driver slew rates of the MAX481, MAX485, MAX490, MAX491, and MAX1487 are not limited, allowing them to transmit up to 2.5Mbps.These transceivers draw between 120µA and ..
₹ 33.00
SKU: RM017780
The MAX485 are low-power transceivers for RS-485 and RS422 communication. Each part contains one driver and one receiver.  The driver slew rates of the MAX481, MAX485, MAX490, MAX491, and MAX1487 are not limited, allowing them to transmit up to 2.5Mbps.These transceivers draw between 120µA and ..
₹ 41.00
SKU: RM017779
The MAX232 device is a dual driver/receiver that includes a capacitive voltage generator to supply EIA-232 voltage levels from a single 5-V supply. Each receiver converts EIA-232 inputs to 5-V TTL/CMOS levels. These receivers have a typical threshold of 1.3 V and a typical hysteresis of 0.5 V, and c..
₹ 41.00
SKU: RM017778
The MAX232 device is a dual driver/receiver that includes a capacitive voltage generator to supply EIA-232 voltage levels from a single 5-V supply. Each receiver converts EIA-232 inputs to 5-V TTL/CMOS levels. These receivers have a typical threshold of 1.3 V and a typical hysteresis of 0.5 V, and c..
₹ 270.00
SKU: RM017777
The FT232R is the latest device to be added to FTDI’s range of USB UART interface Integrated Circuit Devices. The FT232R is a USB to serial UART interface with optional clock generator output and the new FTDIChip-ID™ security dongle feature. In addition, asynchronous and synchronous bit bang interfa..
₹ 538.00
SKU: RM017776
CH340 is a USB bus convert chip and it can realize USB convert to the serial interface, USB convert to IrDA infrared or USB convert to printer interface. In serial interface mode, CH340 supplies common MODEM liaison signal, used to enlarge asynchronous serial interface of a computer or upgrade the c..
₹ 79.00
SKU: RM017775
XTR111AIDGQR – Precision Voltage-to-Current Converter/Transmitter ICNote:Product Images are shown for illustrative purposes only and may differ from the actual product.For Technical Specifications about the IC go through the Datasheet in the Attachment section...
₹ 253.00
SKU: RM017774
The W5100S is a Hardwired TCP/IP embedded Ethernet Controller that enables easier Internet Connection for embedded Systems using SPI (Serial Peripheral Interface) and Parallel Bus.W5100S suits users in need of stable Internet Connectivity Best, using a single chip to implement TCP/IP Stack, 10/100 E..
₹ 151.00
SKU: RM017773
Vinculum-II (VNC2) is FTDI’s 2nd generation of USB Host / Slave controllers. The VNC2 USB 2.0 Host-IC features a powerful 16-bit MCU core, with embedded 256KB Flash and 16KB RAM memory. The unit supports a range of flexible interfaces including UART, SPI, FIFO, and PWM. The complete USB protocol dat..
₹ 412.00
SKU: RM017771
The DS75176B is a high-speed differential TRI- STATE@bus/line transceiver designed to meet the requirements of EIA standard RS485 with an extended common-mode range (+12V to —7V), for multipoint data transmission. In addition, it is compatible with RS-422. The driver and receiver outputs feature TRI..
₹ 41.00
SKU: RM017770
SN75176BP Bidirectional Differential Bus Transceiver ICNote:Product Images are shown for illustrative purposes only and may differ from the actual product.For Technical Specifications about the IC go through the Datasheet in the Attachment section...
₹ 55.00
SKU: RM017769
SN75176BDR – 5V Differential Bus Transceiver Multipoint Transmission ICNote:Product Images are shown for illustrative purposes only and may differ from the actual product.For Technical Specifications about the IC go through the Datasheet in the Attachment section...
₹ 58.00
SKU: RM017768
SN75176AP – TEXAS INSTRUMENNote:Product Images are shown for illustrative purposes only and may differ from the actual product.For Technical Specifications about the IC go through the Datasheet in the Attachment section...
₹ 79.00
Showing 1 to 20 of 66 (4 Pages)