Generic
SKU: RM000676
2.2 uH Color Ring DIP InductorColor Ring DIP Inductor is a small lightweight inductor. Its compact design is ideal to use in electronic devices. The inductor has a coating of epoxy resin which is resistant to humidity and thus improves the life of the same.Additionally, this inductor has relatively ..
₹ 25.00
SKU: RM000202
A DC Geared motor is a simple DC motor with gear box attached to the shaft of the motor which is mechanically commutated electric motor powered from direct current (DC). This DC geared motor is centered shafted metal type motor having 150 rpm.Features of 150 RPM Center Shaft Metal Gear MotorGear mat..
₹ 160.00
SKU: RM000671
2.4" Inch TFT LCD Shield is a Touch Panel Module used in different embedded projectFeatures of 2.4 Inch TFT LCD:2.4" (diagonal) LCD TFT display.Bright, 4 white-LED backlight, on by default but you can connect the transistor to a digital pin for backlight control.Colorful, 18-bit 262,000 different sh..
₹ 422.88
SKU: RM000655
These diffused white LED are used in different applications.Features of 10 mm White Diffused Light Emitting LED:Forward Voltage: 3.0-3.4V.Package Type: Through Hole.Max. Forward Current: 20mA.Emitting color: white led dip diode.Luminous lux: 25000-30000 mcd.Color temperature: 2800-3500k.Life time: 1..
₹ 45.00
SKU: RM000648
The MFRC522 is a highly integrated RF frequency reader/writer IC for contact less communication at 13.56 MHz. The MFRC522 reader supports ISO/IEC 14443 A/MIFARE mode.Features :Current :13-26mA / DC 3.3V.Idle Current :10-13mA / DC 3.3V.Sleep current: < 80uA.Peak current: < 30mA.Operating Freque..
₹ 89.00
SKU: RM000633
This is a high torque DC gear motor providing 32Kg-cm torque. The motor generates a low RPM which is very ideal for making gripper to pick and place heavy objects with greater accuracy.Features of 150 RPM High Torque 12 Volt DC Gear Motor:150RPM 12V DC motors with Metal Gearbox and Metal Gears.18000..
₹ 1,305.00
SKU: RM000617
A Rack and Pinion is a type of linear actuator that comprises a pair of gears which convert rotational motion into linear motion.Features of Pinion Gear:It has a Root diameter of 3.50 cm.There are 58 tooth.Outer diameter of the pinion is 3.80 cm.Whole depth of the Pinion is 1.00 mm.aThe tooth distan..
₹ 30.00
SKU: RM000616
Worm gears are used when large gear reductions are needed. It is common for worm gears to have reductions of 20:1, and even up to 300:1 or greater.Features of Worm Plastic Gear:Pitch Diameter=4 0 mm.Length= 32mm.Center Shaft Diameter= 6 mm.Features of Worm Plastic Gear:Gate control mechanisms.Hoisti..
₹ 45.00
SKU: RM000615
A gear is a rotating machine part having cut teeth, or cogs, which mesh with another toothed part in order to transmit torque, in most cases with teeth on the one gear of identical shape, and often also with that shape on the other gear.Features of 25T Plastic Gear:No. of Teeths= 25.Diameter= 40 mm...
₹ 30.00
SKU: RM000583
This is a black screw mount tyre wheel used in different robotics applications.Features of 4''Double White Screw Mount Tyre:Width of the tyre: 4.5 cm.Diameter of the tyre: 10 cm.Diameter of the Shaft Hole: 6 mm.Applications of 4''Double White Screw Mount Tyre:This wheel is used in various robotics p..
₹ 60.00 ₹ 65.00
SKU: RM000092
HC-05 Bluetooth Bee Master Slave 2in1 Module + Bluetooth XBee For Arduino can also be used with other controllers. Bluetooth pairing name is HC-05. Default baud rate is 38400.Features:Operating voltage: 3.3V.Long range communication over XBee protocol.Applications:Robot Rover.Multiple DIY projects.R..
₹ 799.00 ₹ 899.00
SKU: RM000559
DT-266 AC DC Digital Clamp Multimeter Auto Ranging Amp Current Voltage Measurement Device Ammeter Tong Tester with LCD DisplayAuto ranging clamp multimeter can be used to measure AC and DC Voltage, AC Current, Resistance, Diode test, Data Hold, Max Value Hold. troubleshoot electrical problems safely..
₹ 499.00
SKU: RM000551
The 8 Pin relimate Header is a form of electrical connector, often associated with ribbon cable connector. It consists of one or more rows of pins typically spaced 0.1 inches (2.54mm) apart, but sometimes 2 millimeters (0.079in) or 0.05 inches (1.27mm) is used as well.Features of 8 Pin Relimate Head..
₹ 25.00
SKU: RM000508
It is a general purpose chassis mounting mains transformer. Transformer has 240 V primary windings and centre tapped secondary winding. The transformer has flying colored insulated connecting leads ( Approx 100 mm long ). The Transformer act as step down transformer reducing AC - 240V to AC - 12V.Th..
₹ 139.00
SKU: RM000503
Black Line follower Tapes are designed to be ultra-comfortable easily stretched, and extremely moisture resistant. They can be used for various repairs, decorating, mending, color-coding or labeling. Super thin vinyl tapes should be applied to clean, dry and smooth surfaces. Black Line Follower is u..
₹ 39.00
SKU: RM000499
Glue Gun, is a form of thermoplastic adhesive, that is commonly supplied in solid cylindrical sticks of various diameters, designed to be melted in an electric hot glue gun.Features of Glue Gun (40 Watt):For gluing: wood, plastic, carton, glass, ceramic, stone, textiles, cork, leather, metal.... on ..
₹ 180.00
SKU: RM000495
A wire stripper is a small, hand-held device used to strip the electrical insulation from electric wires. A simple manual wire stripper is a pair of opposing blades much like scissor or wire cutters.Features of Automatic Wire Stripper:2in1, Wire Stripper & Cutter.Applicable Wire Stripper Size: 0..
₹ 225.00
SKU: RM000479
This combo tool set is having 41 pieces of tools used in multiple applications for assembling or de-assembling of machines.Features of 41 Pc. Combination Tool Set:Made from high quality, long lasting material.1 bit adapter, 1 to 3 Reversible Ratchet Driver, 7 torx bit, 2 slotted bit, 2 square ..
₹ 349.00
SKU: RM000477
Double-sided tape is any pressure sensitive tape that is coated with adhesive on both sides. It is designed to stick two surfaces together, often in a way which is not visible in the end product, due to it being in between the objects rather than overlaying them.Features of Double Side Tape:Material..
₹ 30.00
SKU: RM000314
The 3DR Radio telemetry system is designed as an open source Xbee replacement radio set, offering a lower price, longer range and superior performance to Xbee radios. It's availabl in 915Mhz; and in the following configurations: serial board (for the air) and USB (for the ground)Features of Single T..
₹ 3,050.00