Generic

Piezo buzzer is an electronic device commonly used to produce sound. Light weight, simple construction and low price make it usable in various applications like car/truck reversing indicator, computers, call bells etc.Features of Piezo Buzzer (B 20N):High-performance buzzers that employunimorph piez..

Based on the electrode connections, two types of LED matrices are explained below:An LED matrix with a common anode for LEDs in a row — when a row of LEDs feature a common anode, the LEDs in each column must include a common cathode.An LED matrix with a common cathode for LEDs in a row — when a row ..

AMS1117 is a series of low dropout three -terminal regulators with a dropout of 1.8V at 1A load current. AMS 1117 features a very low standby current 2mA compared to 5mA of a competitor. Other than a fixed version, Vout = 1.2V, 1.5V, 1.8V, 2.5V, 3.3V, 5V, and 12V, AMS1117 has an adjustable version, ..

It is a smart Balance Charger for 2 and 3 cell lithium polymer battery. It works on 110 to 230V AC. It can be used to charge any 2 or 3 cell Lithium Polymer battery which can sustain continuous charging at 600mA to 800mA.Features of Quadcopter Balance Charger for 7.4V-11.1V Li-Po Battery:Charger for..

This battery is Capable of maximum continuous discharge rates up to 25C, burst rate 50C, placing this battery among the most powerful Li-Po battery packs in its class! It offers an excellent blend of weight, power and performance.Features of Lithium Polymer 3 Cell, 11.1V, 3300mAh discharge Battery:C..

These LED indicators are using in different applications as an indicator emitting red color.Features of Led Indicator With Plastic Casing (RED):Ease to use.Ease of connecting.Long life.Applications of Led Indicator With Plastic Casing (RED):It is using in various applications as an indicator in bike..

This is fully programmable 20A BLDC ESC with 5V, 3A BEC. Can drive motors with continuous 20Amp load current. It has sturdy construction with 2 separate PCBs for Controller and ESC power MOSFETs. It can be powered with 2-4 lithium Polymer batteries or 5-12 NiMH / NiCd batteries. It has separate volt..

The L298 is an integrated monolithic circuit in a 15- lead Multiwatt and PowerSO20 packages. It is a high voltage, a high current dual full-bridge driver designed to accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC and stepping motors. Two enable inputs are pr..

The AM2302 or DHT22 is a temperature & humidity sensor whose output having calibrated digital signal. It applies exclusive digital-signal-collecting-technique and humidity sensing technology, assuring its reliability and stability. Its sensing elements are connected with 8-bit single-chip comput..

Gear parts are used when large gear reductions are needed. It is common for Gear parts to have reductions of 20:1, and even up to 300:1 or greater.Many Gear parts have an interesting property that no other gear set has: the worm can easily turn the gear, but the gear cannot turn the worm. This is be..

This is a High Torque DC Motor 3500 RPM. It is most suitable for light weight robot requiring small power. This motor can be used with 69mm Diameter Wheel for Plastic Gear Motors and 87mm Diameter Multipurpose Wheel for Plastic Gear Motors. A DC motor is a mechanically commutated electric motor powe..

Chassis Board is the mechanical frame structure of the mobile robots. It should is the backbone of the robot. We arrange/connect everything like motors, sensors, wheels, development board, studs, clamps , screws, etc. of the robot to it.It give us the base to build our robot and allow us place our c..

Chassis Board is the mechanical frame structure of the mobile robots. It should is the backbone of the robot. We arrange/connect everything like motors, sensors, wheels, development board, studs, clamps , screws, etc. of the robot to it.It give us the base to build our robot and allow us place our c..

INGCO 5pcs Masonry Drill Bits Set – AKDB3055 :Masonry Drill Bit Set.Material High Grade Steel.Sizes: 4x75mm, 5x85, 6x100mm, 8x120mm & 10x120mm...

A 10 Watt Soldering Iron  is a hand tool used in soldering. It supplies heat to melt the solder so that it can flow into the joint between two workpieces. A soldering iron is composed of a heated metal tip and an insulated handle. Heating is often achieved electrically, by passing an electric c..

9 x 15CM Universal PCB Prototype Board Double-Side :This is 9 x 15CM Universal PCB Prototype Board Double-Side High-quality universal prototyping board with standard 0.1″ spacing through holes.High-quality 4×6 cm FR4 material, Double sided, HASL, NC CNC drilled...

5600pF/5.6nF/0.0056uF 562 Ceramic Capacitor (Pack of 20)Introducing our 5600pF (562) Ceramic Capacitor Pack, the perfect solution for your electronic projects! This pack includes 30 high-quality ceramic capacitors, each rated at 5600pF (562) to ensure excellent performance and reliability in a varie..

2.2 uH Color Ring DIP InductorColor Ring DIP Inductor is a small lightweight inductor. Its compact design is ideal to use in electronic devices. The inductor has a coating of epoxy resin which is resistant to humidity and thus improves the life of the same.Additionally, this inductor has relatively ..

A DC Geared motor is a simple DC motor with gear box attached to the shaft of the motor which is mechanically commutated electric motor powered from direct current (DC). This DC geared motor is centered shafted metal type motor having 150 rpm.Features of 150 RPM Center Shaft Metal Gear MotorGear mat..

2.4" Inch TFT LCD Shield is a Touch Panel Module used in different embedded projectFeatures of 2.4 Inch TFT LCD:2.4" (diagonal) LCD TFT display.Bright, 4 white-LED backlight, on by default but you can connect the transistor to a digital pin for backlight control.Colorful, 18-bit 262,000 different sh..