Generic

The MOC301XM and MOC302XM series are optically isolated triac driver devices. These devices contain a GaAs infrared emitting diode and a light-activated silicon bilateral switch, which functions like a triac. They are designed for interfacing between electronic controls and power triacs to control r..

The MCTE is an Industry Standard Single Channel Phototransistor. Each optocoupler consists of gallium arsenide infrared LED and a silicon NPN phototransistor. These couplers are Underwriters Laboratories (UL) listed to comply with a 5300 VRMS isolation test voltage. This isolation performance is acc..

LTV-827S-TA1 – Photocoupler 5KV 2CH Transistor 8-SMDSpecifications and Features:Current transfer ratio: ( CTR : MIN. 50% at IF = 5mA, VCE = 5V )High input-output isolation voltage ( Viso = 5,000Vrms )Response time ( tr : TYP. 4?s at VCE = 2V, IC = 2mA, RL = 100? )Dual-in-line packageWide lead spacin..

The HCPL-4504 contains a GaAsP LED. The LED is optically coupled to an integrated high gain photodetector. The HCPL-4504 series has short propagation delays and high CTR. The HCPL-4504 series also has a guaranteed propagation delay difference (tPLH-tPHL). These features make the HCPL-4504 series an ..

The HCPL-3700 voltage/current threshold detection optocoupler consists of an AlGaAs LED connected to a threshold sensing input buffer IC which are optically coupled to a high gain Darlington output. The input buffer chip is capable of controlling threshold levels over a wide range of input voltages ..

The HCPL-316J is a highly integrated power control device that incorporates all the necessary components for a complete, isolated IGBT gate drive circuit with fault protection and feedback into one SO-16 package. TTL input logic levels allows direct interface with a microcontroller, and an optically..

The Broadcom HCPL-315X consists of an LED optically coupled to an integrated circuit with a power output stage. This optocoupler is ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. The high operating voltage range of the output stage provides the drive ..

The Insulated Gate Bipolar transistor (IGBT) is a cross between a MOSFET (metal-oxide-semiconductor field-effect transistor) and a BJT (bipolar junction transistor) since it combines the positive aspects of MOSFETs and BJTs...

The HCNW4506 contain an AlGaAs LED. The LED is optically coupled to an integrated high gain photo detector. Minimized propagation delay difference between devices makes these optocouplers excellent solutions for improving inverter efficiency through reduced switching dead time. An on chip 20 k? outp..

The H11L1 consists of a Schmitt Trigger optically coupled to a gallium arsenide Infrared-emitting diode in a 6-lead DIP package with different lead forming options.Applications:Line ReceiverLogic to Logic IsolatorMicroprocessor system interfaceAC to TTL conversionFeatures:-High isolation 5000 VRMSDC..

The H11FXM series consists of a Gallium-Aluminum-Arsenide IRED emitting diode coupled to a symmetrical bilateral silicon photo-detector. The detector is electrically isolated from the input and performs like an ideal isolated FET designed for distortion-free control of low-level AC and DC analog sig..

The general purpose optocouplers consist of a gallium arsenide infrared emitting diode driving a silicon phototransistor in a 6-pin dual in-line package.ApplicationsConsumer AppliancesIndustrial MotorFeatures:UL recognized (File # E90700, Volume 2)VDE recognized (File # 102497)- Add option V (e.g., ..

The general purpose optocouplers consist of a gallium arsenide infrared emitting diode driving a silicon phototransistor in a 6-pin dual in-line package.ApplicationsConsumer AppliancesIndustrial MotorFeatures:UL recognized (File # E90700, Volume 2)VDE recognized (File # 102497)- Add option V (e.g., ..

Photocoupler Optoisolator Phototransistor Output, AC Input 5000Vrms 1 Channel 4-SMDSpecifications and Features:AC input responseCurrent transfer ratio (CTR: Min. 20% at IF =1mA ,VCE =5V)High isolation voltage between input and output (Viso=5000 V rms )Wide Operating temperature range -55~110 degree ..

The EL814-A107 Series of devices each consist of two infrared emitting diodes, connected in inverse parallel, optically coupled to a phototransistor detector.Specifications and Features:Voltage – Isolation: 5000VrmsVoltage – Output: 80V maxOutput Type: TransistorInput Type: AC, DCOperating Temp..

EL3021 is an Isolator with forward voltage of 1.18V from Everlight Electronics. It provides voltage isolation upto 5kV, its off state voltage is 400V. Operational temperature range is -55 to 100 C.Specifications and Features:Output Type: TriacVoltage – Off State: 400VZero Crossing Circuit: NoCurrent..

The CNY74-4 consists of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode in an 8-lead, resp. 16-lead plastic dual inline package. The elements are mounted on one lead frame using a co-planar technique, providing a fixed distance between input and output for the highe..

The CNY74-2 consists of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode in an 8-lead, resp. 16-lead plastic dual inline package. The elements are mounted on one lead frame using a co-planar technique, providing a fixed distance between input and output for the highe..

The CNY65 consists of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode in a 4 pin plastic package. The single components are mounted opposite one another, providing a distance between input and output for the highest safety requirements of > 3 mm.Features:-Rated r..

The CNY17 is an optically coupled pair consisting of a gallium arsenide infrared emitting diode optically coupled to a silicon NPN phototransistor. Signal information, including a DC level, can be transmitted by the device while maintaining a high degree of electrical isolation between input and out..