Generic

The HCNW4506 contain an AlGaAs LED. The LED is optically coupled to an integrated high gain photo detector. Minimized propagation delay difference between devices makes these optocouplers excellent solutions for improving inverter efficiency through reduced switching dead time. An on chip 20 k? outp..

The H11L1 consists of a Schmitt Trigger optically coupled to a gallium arsenide Infrared-emitting diode in a 6-lead DIP package with different lead forming options.Applications:Line ReceiverLogic to Logic IsolatorMicroprocessor system interfaceAC to TTL conversionFeatures:-High isolation 5000 VRMSDC..

The H11FXM series consists of a Gallium-Aluminum-Arsenide IRED emitting diode coupled to a symmetrical bilateral silicon photo-detector. The detector is electrically isolated from the input and performs like an ideal isolated FET designed for distortion-free control of low-level AC and DC analog sig..

The general purpose optocouplers consist of a gallium arsenide infrared emitting diode driving a silicon phototransistor in a 6-pin dual in-line package.ApplicationsConsumer AppliancesIndustrial MotorFeatures:UL recognized (File # E90700, Volume 2)VDE recognized (File # 102497)- Add option V (e.g., ..

The general purpose optocouplers consist of a gallium arsenide infrared emitting diode driving a silicon phototransistor in a 6-pin dual in-line package.ApplicationsConsumer AppliancesIndustrial MotorFeatures:UL recognized (File # E90700, Volume 2)VDE recognized (File # 102497)- Add option V (e.g., ..

Photocoupler Optoisolator Phototransistor Output, AC Input 5000Vrms 1 Channel 4-SMDSpecifications and Features:AC input responseCurrent transfer ratio (CTR: Min. 20% at IF =1mA ,VCE =5V)High isolation voltage between input and output (Viso=5000 V rms )Wide Operating temperature range -55~110 degree ..

The EL814-A107 Series of devices each consist of two infrared emitting diodes, connected in inverse parallel, optically coupled to a phototransistor detector.Specifications and Features:Voltage – Isolation: 5000VrmsVoltage – Output: 80V maxOutput Type: TransistorInput Type: AC, DCOperating Temp..

EL3021 is an Isolator with forward voltage of 1.18V from Everlight Electronics. It provides voltage isolation upto 5kV, its off state voltage is 400V. Operational temperature range is -55 to 100 C.Specifications and Features:Output Type: TriacVoltage – Off State: 400VZero Crossing Circuit: NoCurrent..

The CNY74-4 consists of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode in an 8-lead, resp. 16-lead plastic dual inline package. The elements are mounted on one lead frame using a co-planar technique, providing a fixed distance between input and output for the highe..

The CNY74-2 consists of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode in an 8-lead, resp. 16-lead plastic dual inline package. The elements are mounted on one lead frame using a co-planar technique, providing a fixed distance between input and output for the highe..

The CNY65 consists of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode in a 4 pin plastic package. The single components are mounted opposite one another, providing a distance between input and output for the highest safety requirements of > 3 mm.Features:-Rated r..

The CNY17 is an optically coupled pair consisting of a gallium arsenide infrared emitting diode optically coupled to a silicon NPN phototransistor. Signal information, including a DC level, can be transmitted by the device while maintaining a high degree of electrical isolation between input and out..

he CNY17 is an optically coupled pair consisting of a gallium arsenide infrared emitting diode optically coupled to a silicon NPN phototransistor. Signal information, including a DC level, can be transmitted by the device while maintaining a high degree of electrical isolation between input and outp..

CNY17-2 Phototransistor IC with 10mA and 150mW Electrical Rating is an optically coupled pair consisting of gallium arsenide infrared emitting diode optically coupled to a silicon NPN phototransistor. Signal information, including a DC level, can be transmitted by the device while maintaining a high..

The 6N13x Series high gain series couplers use a Light Emitting Diode and an integrated high gain photodetector to provide an extremely high current transfer ratio between input and output. Separate pins for the photodiode and output stage result in TTL compatible saturation voltages and high-speed ..

The 6N13x Series high gain series couplers use a Light Emitting Diode and an integrated high gain photodetector to provide an extremely high current transfer ratio between input and output. Separate pins for the photodiode and output stage result in TTL compatible saturation voltages and high-speed ..

6N137M – ON SEMICONDUCTONote:Product Images are shown for illustrative purposes only and may differ from the actual product.For Technical Specifications about the IC go through the Datasheet in the Attachment section...

The EL 6N13x Series high gain series couplers use a Light Emitting Diode and an integrated high gain photodetector to provide an extremely high current transfer ratio between input and output. Separate pins for the photodiode and output stage result in TTL compatible saturation voltages and high-spe..

The 6N13x Series high gain series couplers use a Light Emitting Diode and an integrated high gain photodetector to provide an extremely high current transfer ratio between input and output. Separate pins for the photodiode and output stage result in TTL compatible saturation voltages and high-speed ..

The 6N13x Series high gain series couplers use a Light Emitting Diode and an integrated high gain photodetector to provide an extremely high current transfer ratio between input and output. Separate pins for the photodiode and output stage result in TTL compatible saturation voltages and high-speed ..