Generic

The ADXL345 LGA-14 3-axis Accelerometer is a small, thin, ultralow power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g. Digital output data is formatted as 16-bit twos complement and is accessible through either an SPI (3- or 4-wire) or I2C digital interface. The ADX..

ZMOD4410AI3 waterproof IAQ sensor’s IP67-rated packaging enables operation in splash-prone areas and delivers a cost-effective solution for applications in wet or dirty environments such as kitchens, bathrooms and hospital rooms with frequent exposure to water, oils, and dust. It features a unique h..

ADXL-335 Accelerometer ICNote:Product Images are shown for illustrative purposes only and may differ from the actual product.For Technical Specifications about the IC go through the Datasheet in the Attachment section...

3382H-1-103 – BOURNSNote:Product Images are shown for illustrative purposes only and may differ from the actual product.For Technical Specifications about the IC go through the Datasheet in the Attachment section...

The PC817 DIP-4 Transistor Output Optocoupler is a 1-channel 4-pin Transistor Output Photocoupler contains an IRED optically coupled to a phototransistor. It is suitable for programmable controllers and facsimiles.Features:10 to 20mA Collector current.50mA Forward current.6V Reverse voltage.200mW To..

The EL817 series of devices each consist of an infrared emitting diode, optically coupled to a phototransistor detector. They are packaged in a 4-pin SMD package and Also available in DIP Package option.Features:10 to 20mA Collector current.50mA Forward current.6V Reverse voltage.200mW Total power d..

TPC817S1B RAG – 200mW 5000Vrms 1-Ch Optocoupler 4Pin SMD VCEO=80V, IF=50m, CTR:130~260% DC Input PhototransistorSpecifications and Features:Current transfer ratio (CTR: MIN.80% at IF=5mA, VCE=5V)High isolation voltage between input and output (Viso=5000V rms)Creepage distance 7.62mmUL Recognized Fil..

The TLP785 consists of a silicone phototransistor optically coupled to an infrared emitting diode in a four lead plastic DIP (DIP4) with having high isolation voltage (AC: 5000 Vrms (min)).Specifications and Features:Case/Package: PDIP-4Max Collector Current: 10 mAMax Input Current: 60 mANumber of P..

The TLP291-4 consists of photo transistor, optically coupled to a gallium arsenide infrared emitting diode. TLP291-4 is housed in the SO16 package, very small and thin coupler. Since TLP291-4 are guaranteed wide operating temperature (Ta=-55 to 110 ?C), it?s suitable for high-density surface mountin..

The TLP290-4 consists of photo transistor, optically coupled to a gallium arsenide infrared emitting diode. TLP290-4 is housed in the SO16 package, very small and thin coupler. Since TLP290-4 are guaranteed wide operating temperature (Ta=-55 to 110 ?C), it?s suitable for high-density surface mountin..

TLP281 and TLP281-4 is a very small and thin coupler, suitable for surface mount assembly in applications such as PCMCIA Fax modem,programmable controllers. TLP281 and TLP281-4 consist of photo transistor,optically coupled to a gallium arsenide infrared emitting diode.Application:Programmable Contro..

TLP183 is a low input type phototransistor coupler that consists of a photo transistor optically coupled to an infrared emitting diode in a SO6 package. TLP183 is guaranteed high isolation voltage (3750 Vrms) and wide operating temperature (Ta = -55 to 125C). TLP183 is smaller than DIP package, it’s..

Optoisolator Transistor Output 3750Vrms 1 Channel 6-SO, 4 LeadPhotocouplers InGaAs Infrared LED & Photo-TransistorSpecifications and Features:2.3mm low-profile package / AC inputApplication Scope – Communication interface / PLC / Power supplyFunction – Low IFNumber of Circuits – 1Input type – AC..

The TLP131 is a small outline coupler, suitable for surface mount assembly. TLP131 consists of a photo transistor, optically coupled to a gallium arsenide infrared emitting diode.Specifications and Features:Collector-emitter voltage: 80V (min.)Current transfer ratio: 50% (min.)Rank GB: 100% (min.)Is..

The TLP127 is a small outline coupler, suitable for surface mount assembly. TLP127 consists of a gallium arsenide infrared emitting diode, optically coupled to a darlington photo transistor with an integral base-emitter resistor, and provides 300V VCEO.Specifications and Features:Collector-emitter v..

PS2801-4 NEC/CEL Transistor Output Optocoupler – SMD SOP-16 PackageSpecifications and Features:Number of Channels: 4Voltage – Isolation: 2500VrmsCurrent Transfer Ratio (Min): 80% @ 5mACurrent Transfer Ratio (Max): 600% @ 5mATurn On / Turn Off Time (Typ): 6?s, 5?sRise / Fall Time (Typ): 3?s, 5?sInput..

The PS2501-1,PS2501-2,PS2501-4 series of optically coupled isolators consist of infrared light emitting diodes and NPN silicon photo transistors in space efficient dual in line plastic packages.Applications:Computer terminalsIndustrial systems controllersMeasuring instrumentsSignal transmission betw..

PC357NJ0000F – (SMD Package) – Sharp 1-Channel Transistor Output OptocouplerSpecifications and Features:Manufacturer: SHARPMounting: SMDNumber of channels: 1Kind of output: transistorInsulation voltage: 3.75kVCollector-emitter voltage: 80VCase: Mini-flat 4pinTurn-on time: 4?sTurn-off time: 3?s..

The MOC8101, MOC8102, MOC8103, MOC8104 family optocoupler consists of a gallium arsenide infrared emitting diode optically coupled to a silicon planar phototransistor detector in a plastic plug-in DIP-6 package. The coupling device is suitable for signal transmission between two electrically separat..

The MOC8101, MOC8102, MOC8103, MOC8104 family optocoupler consists of a gallium arsenide infrared emitting diode optically coupled to a silicon planar phototransistor detector in a plastic plug-in DIP-6 package. The coupling device is suitable for signal transmission between two electrically separat..