Generic

The industry’s first and lowest power Arm Cortex-M23 MCU consumes less than 25uA/MHz in active mode and less than 100 nA in sleep mode. It features an enhanced peripheral touch controller, advanced analog, ISO7816 smart card interface, event system and Sleep Walking peripherals. SAM L10 achieved EEM..

ARM MCU, SAM 32 Family SAM L Series Microcontrollers, ARM Cortex-M23, 32 bit, 32 MHz, 32 KBNote:For more technical details, go through the datasheet in the attachmentsImage may vary from actual product in terms of brand and value printed..

ARM MCU, SAM D Series, SAM32 Family SAM D1X Series Microcontrollers, ARM Cortex-M0+, 32 bit, 48 MHzSpecifications:Program Memory Size: 8KBNo. of Pins: 14PinsIC Case / Package: SOICMCU Case Style: SOICNo. of I/O’s: 12I/O’sInterfaces I2C, LIN, SPI, UART, USARTEmbedded Interface Type: I2C, LIN, SPI, UA..

It is designed to give designers a quick start to develop code on the AVR and for prototyping and testing of new designs.Features:AVR Studio® CompatibleRS-232 Interface to PC for Programming and Control Regulated Power Supply for 10 – 15V DC Power Sockets for 8-pin, 20-pin, 28-pin, and 40-..

ATMEGA128L-8MU – MICROCHIPNote:Product Images are shown for illustrative purposes only and may differ from the actual product.For Technical Specifications about the IC go through the Datasheet in the Attachment section...

The MPU 6050 QFN-24 3-Axis Gyro/Accelerometer IC incorporates InvenSense’s MotionFusion and run-time calibration firmware that enables manufacturers to eliminate the costly and complex selection, qualification, and system level integration of discrete devices in motion-enabled products, and guarante..

INEMO Inertial Module – LSM6DSL/LSM6DSLTR/SF 70S  is a system-in-package featuring a high-performance 3-axis digital accelerometer and 3-axis digital gyroscope. The integrated power-efficient modes are able to reduce the power consumption down to 0.65 mA in high-performance mode, combining alwa..

The BMP180 Digital Pressure Sensor IC is the new digital barometric pressure sensor with a very high performance, which enables applications in advanced mobile devices, such as smartphones, tablet PCs and sports devices. It follows the BMP085 and brings many improvements, like the smaller size and t..

The ADXL345 LGA-14 3-axis Accelerometer is a small, thin, ultralow power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g. Digital output data is formatted as 16-bit twos complement and is accessible through either an SPI (3- or 4-wire) or I2C digital interface. The ADX..

ZMOD4410AI3 waterproof IAQ sensor’s IP67-rated packaging enables operation in splash-prone areas and delivers a cost-effective solution for applications in wet or dirty environments such as kitchens, bathrooms and hospital rooms with frequent exposure to water, oils, and dust. It features a unique h..

ADXL-335 Accelerometer ICNote:Product Images are shown for illustrative purposes only and may differ from the actual product.For Technical Specifications about the IC go through the Datasheet in the Attachment section...

3382H-1-103 – BOURNSNote:Product Images are shown for illustrative purposes only and may differ from the actual product.For Technical Specifications about the IC go through the Datasheet in the Attachment section...

The PC817 DIP-4 Transistor Output Optocoupler is a 1-channel 4-pin Transistor Output Photocoupler contains an IRED optically coupled to a phototransistor. It is suitable for programmable controllers and facsimiles.Features:10 to 20mA Collector current.50mA Forward current.6V Reverse voltage.200mW To..

The EL817 series of devices each consist of an infrared emitting diode, optically coupled to a phototransistor detector. They are packaged in a 4-pin SMD package and Also available in DIP Package option.Features:10 to 20mA Collector current.50mA Forward current.6V Reverse voltage.200mW Total power d..

TPC817S1B RAG – 200mW 5000Vrms 1-Ch Optocoupler 4Pin SMD VCEO=80V, IF=50m, CTR:130~260% DC Input PhototransistorSpecifications and Features:Current transfer ratio (CTR: MIN.80% at IF=5mA, VCE=5V)High isolation voltage between input and output (Viso=5000V rms)Creepage distance 7.62mmUL Recognized Fil..

The TLP785 consists of a silicone phototransistor optically coupled to an infrared emitting diode in a four lead plastic DIP (DIP4) with having high isolation voltage (AC: 5000 Vrms (min)).Specifications and Features:Case/Package: PDIP-4Max Collector Current: 10 mAMax Input Current: 60 mANumber of P..

The TLP291-4 consists of photo transistor, optically coupled to a gallium arsenide infrared emitting diode. TLP291-4 is housed in the SO16 package, very small and thin coupler. Since TLP291-4 are guaranteed wide operating temperature (Ta=-55 to 110 ?C), it?s suitable for high-density surface mountin..

The TLP290-4 consists of photo transistor, optically coupled to a gallium arsenide infrared emitting diode. TLP290-4 is housed in the SO16 package, very small and thin coupler. Since TLP290-4 are guaranteed wide operating temperature (Ta=-55 to 110 ?C), it?s suitable for high-density surface mountin..

TLP281 and TLP281-4 is a very small and thin coupler, suitable for surface mount assembly in applications such as PCMCIA Fax modem,programmable controllers. TLP281 and TLP281-4 consist of photo transistor,optically coupled to a gallium arsenide infrared emitting diode.Application:Programmable Contro..

TLP183 is a low input type phototransistor coupler that consists of a photo transistor optically coupled to an infrared emitting diode in a SO6 package. TLP183 is guaranteed high isolation voltage (3750 Vrms) and wide operating temperature (Ta = -55 to 125C). TLP183 is smaller than DIP package, it’s..