Generic

he CNY17 is an optically coupled pair consisting of a gallium arsenide infrared emitting diode optically coupled to a silicon NPN phototransistor. Signal information, including a DC level, can be transmitted by the device while maintaining a high degree of electrical isolation between input and outp..

CNY17-2 Phototransistor IC with 10mA and 150mW Electrical Rating is an optically coupled pair consisting of gallium arsenide infrared emitting diode optically coupled to a silicon NPN phototransistor. Signal information, including a DC level, can be transmitted by the device while maintaining a high..

The 6N13x Series high gain series couplers use a Light Emitting Diode and an integrated high gain photodetector to provide an extremely high current transfer ratio between input and output. Separate pins for the photodiode and output stage result in TTL compatible saturation voltages and high-speed ..

The 6N13x Series high gain series couplers use a Light Emitting Diode and an integrated high gain photodetector to provide an extremely high current transfer ratio between input and output. Separate pins for the photodiode and output stage result in TTL compatible saturation voltages and high-speed ..

6N137M – ON SEMICONDUCTONote:Product Images are shown for illustrative purposes only and may differ from the actual product.For Technical Specifications about the IC go through the Datasheet in the Attachment section...

The EL 6N13x Series high gain series couplers use a Light Emitting Diode and an integrated high gain photodetector to provide an extremely high current transfer ratio between input and output. Separate pins for the photodiode and output stage result in TTL compatible saturation voltages and high-spe..

The 6N13x Series high gain series couplers use a Light Emitting Diode and an integrated high gain photodetector to provide an extremely high current transfer ratio between input and output. Separate pins for the photodiode and output stage result in TTL compatible saturation voltages and high-speed ..

The 6N13x Series high gain series couplers use a Light Emitting Diode and an integrated high gain photodetector to provide an extremely high current transfer ratio between input and output. Separate pins for the photodiode and output stage result in TTL compatible saturation voltages and high-speed ..

This is IC 4N35 an Optocoupler with Transistor Output, 1 Channel, DIP, 6 Pins, 50 mA, 5 kV. Each optocoupler consists of gallium arsenide infrared LED and a silicon NPN phototransistorApplications:AC mains detectionReed relay drivingSwitch-mode power supply feedbackTelephone ring detectionLogic grou..

These devices consist of two independent, high-gain, frequency-compensated operational amplifiers designed to operate from a single supply over a wide range of voltages. Operation from split supplies also is possible if the difference between the two supplies is 3 V to 32 V, and VCC is at least 1.5 ..

Note: This Product is available in two different variants of IC  (LM358DR and OPA1612) with the same working we will ship it randomly.Note :  The color  of  IC may be differentThe LM358DR is a dual operational amplifier in an 8 pin SOIC package. It consists of two independent, hi..

The LM324DR is a 4 independent high-gain frequency-compensated Operational Amplifier designed specifically to operate from a single supply or split supply over a wide range of voltages.Features:Internal frequency compensationCommon-mode input voltage range includes ground, allowing direct sensing ne..

UPC4570 IC Low Noise Dual Ultra Operational Amplifier (Op-Amp) ICNote:Product Images are shown for illustrative purposes only and may differ from the actual product.For Technical Specifications about the IC go through the Datasheet in the Attachment section...

TS912IDT – 16V Rail-to-rail CMOS Dual Operational Amplifier IC SOIC ICNote:Product Images are shown for illustrative purposes only and may differ from the actual product.For Technical Specifications about the IC go through the Datasheet in the Attachment section...

The TL97x family of single, dual, and quad operational amplifiers operates at voltages as low as ±1.35 V and features output rail-to-rail signal swing. The TL97x boasts characteristics that make them particularly well suited for portable and battery-supplied equipment. Very low noise and low distort..

TL084 Quad JFET Input Operational Amplifier (Op-Amp) ICNote:Product Images are shown for illustrative purposes only and may differ from the actual product.For Technical Specifications about the IC go through the Datasheet in the Attachment section...

TL082 JFET Input Operational Amplifier (Op-Amp) ICNote:Product Images are shown for illustrative purposes only and may differ from the actual product.For Technical Specifications about the IC go through the Datasheet in the Attachment section...

TL072CP Amplifier ICNote:Product Images are shown for illustrative purposes only and may differ from the actual product.For Technical Specifications about the IC go through the Datasheet in the Attachment section...

TCA0372DWR2G – 40V 1A Output Dual Power Operational Amplifier 16-Pin SOIC ON Semiconductor ICNote:Product Images are shown for illustrative purposes only and may differ from the actual product.For Technical Specifications about the IC go through the Datasheet in the Attachment section...

SGM358YMS/TR – 1MHz 60uA Rail-to-Rail I/O CMOS Operational Amplifier ICNote:Product Images are shown for illustrative purposes only and may differ from the actual product.For Technical Specifications about the IC go through the Datasheet in the Attachment section...