Generic

The Hall effect sensor is a transducer that varies its output voltage in response to a magnetic field.Features of Hall Effect Sensor:Such a switch costs less than a mechanical switch and is much more reliable.It can be operated up to 100 kHz.It does not suffer from contact bounce because a solid sta..

The crocodile connector is a clip-type DC connector used to supply dc power to electronic device from Battery.Features of Crocodile /Clip Type Connector For Battery For :Ease of connecting.No sparking.Low energy drop.Applications of Crocodile /Clip Type Connector For Battery For :DIY projects.Roboti..

A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. Resistors act to reduce current flow, and, at the same time, act to lower voltage levels within circuits. In electronic circuits, resistors are used to limit current flow, to adjust ..

These are 0805 size SMD Resistor with 1% tolerance. All thick film types of chip resistors have a rectangular ceramic body. The resistive element is a metal glaze film. The chips have been trimmed to the required ohmic resistance by cutting one or more grooves in the resistive layer. This process i..

IR Based Analog Color Sensor Pair is a simple and effective device as a analog sensor. These sensors can be used as an Obstacle Sensor, Edge Sensor, Color Sensor (Multi-color), Light Sensor, Line Sensor, etc. It comes without any inbuilt Dual Operational Amplifier IC that converts the Analog voltage..

Atmega-16 Project Development Board is a complete starter kit and development system for the AVR Atmega16 microcontrollers from Robomart. It is designed to give designers a quick start for interfacing of i/o peripheral devices.Features of ATMEGA16 Project Board without Controller V 2.0:ATMEGA 16 IC ..

The LM2596 is an adjustable DC voltage regulator provides fixed DC power to the load.Features of LM2596 ADJ DC-DC Step-Down Module 5V/12V/24V 3A Adjustable Voltage Regulator:Model / Name: LM2596S DC-DC step-down module.Input voltage: 3.2V to 40V.Output voltage: 1.25V to 35V.Output current: 3A (max)...

This is 9V Battery Connector with a 10 cm cable. It is used to connect a 9V battery to the required application. This snap power cable to DC 9V clip male line battery adapter for mostly used to power Arduino boards as well as many development boards.The connector comes with open-wire at one end and ..

Atmega-16/32 Project Development Board is a complete starter kit and development system for the AVR Atmega16 microcontrollers from Robosapiens. It is designed to give designers a quick start for interfacing of i/o peripheral devices.Features of ATMEGA 16 Project Board Without Controller V 1.0ATMEGA ..

These are 0805 size SMD Resistor with 1% tolerance. All thick film types of chip resistors have a rectangular ceramic body. The resistive element is a metal glaze film. The chips have been trimmed to the required ohmic resistance by cutting one or more grooves in the resistive layer. This process i..

200 uH Color Ring DIP Inductor Axial Color Ring DIP Inductor is a small lightweight inductor. Its compact design is ideal to use in electronic devices. The inductor has a coating of epoxy resin which is resistant to humidity and thus improves the life of the same.Additionally, this inductor has..

L Type small Clamp for iMechano/Mechanzo (Red)Specifications:L-TypeRed ColorSmall Clamp..

This version eliminates the 1.0mm 6P SM06B GPS interface of V2.52 old version, and change it into DF13-4P I2C external compass interface.Put DF13-5P GPS interface with external compass interface, convenient for the connection of GPS and external compass.V2.52 I2C interface changes to multifunctional..

The Hall Effect sensor is a transducer that varies its output voltage in response of a magnetic field. Hall Effect sensors are used for proximity switching, positioning, speed detection, and current sensing applications. In its simplest form, the sensor operates as an analog transducer, directly ret..

The XM1584 Ultra-Small Size DC-DC Step-Down Power Supply Module having 3A Adjustable Step-Down Module.Features of XM1584 DC-DC 3A Adjustable Step-Down Module:Input voltage: 4.5V-28V.Output voltage: 0.8V-20V.Output current: 3A(MAX).Conversion efficiency: 96% (highest).Output ripple: 30mV(MAX).Size: 2..

Tantalum capacitors allow for extremely high capacitance levels in tiny packages. Tantalum electrolytic capacitors are made up of an anode, some electrolyte, and a cathode, exactly like conventional electrolytic capacitors. Only a very little leakage DC current can travel through the capacitor since..

Jumper is a small blocks on a circuit board with two or more pins emerging from them. Plastic plugs containing a wire fit down over the pins. The wire connects the pins and creates a circuit. To change a jumper setting, pull the plug off its pin(s) and carefully fit it down onto the pin(s) indicated..

These are 0805 size SMD Resistor with 1% tolerance. All thick film types of chip resistors have a rectangular ceramic body. The resistive element is a metal glaze film. The chips have been trimmed to the required ohmic resistance by cutting one or more grooves in the resistive layer. This process i..