Generic

It is a Two Pin PBT KFC3 type connector. Used in Robomart Circuit Board or also you can use it in any circuit board for providing POWER input as well as giving Output to other devices.Features of PBT Connector:Rated voltage: 300V.Rated current: 16A.Wire range: 22-14AWG 2.5 square mm.Strip length: 4...

The condenser microphone, or capacitor microphone or electrostatic microphone is a device which converting from sound energy into electrical energy. It’s working as a parallel plate capacitor and works on the principle of a variable capacitance. It consists of two plates, one fixed (called the back ..

A wire stripper is a small, hand-held device used to strip the electrical insulation from electric wires. A simple manual wire stripper is a pair of opposing blades much like scissor or wire cutters.Features of Pye Wire Stripper:Allows for precision hand cutting of small OD multi-conductor cable plu..

Features:-Tantalum capacitors are a subtype of electrolytic capacitors. They are made of tantalum metal which acts as an anode, covered by a layer of oxide which acts as the dielectric, surrounded by a conductive cathode. The use of tantalum allows for a very thin dielectric layer. This results in a..

This 10uF 50V capacitor is a good quality radial polarized Electrolytic capacitor. Electrolytic capacitors are widely used in switched-mode power supplies, DC-DC converters, and power supplies. This capacitor has a long life, low leakage current, and wide operating range.Features of 10uF 50V Electro..

The high-performance, low-power Atmel 8-bit AVR RISC-based microcontroller combines 8KB ISP flash memory, 1KB SRAM, 512B EEPROM, an 7-channel/10-bit A/D converter (TQFP and QFN/MLF), and debugWIRE for on-chip debugging. The device supports a throughput of 16 MIPS at 16 MHz and operates between 4.5-5..

This UNIVERSAL GPS FOLDING ANTENNA BASE SET/BLACK is used to mount GPS device on the flight. GPS devices are most accurate if their antennas have a clear view of the sky. GPS/Compass modules are also prone to the electromagnetic interference generated by motors, ESCs, and radio transmission equipmen..

A tantalum capacitor is an electrolytic capacitor, a passive component of electronic circuits. It consists of a pellet of porous tantalum metal as an anode, covered by an insulating oxide layer that forms the dielectric, surrounded by liquid or solid electrolyte as a cathode.It is a 1.5uF 50V Tantal..

Description:IRFP350 is a new generation of high voltage MOSFET family that utilizes an advanced charge balance mechanism for outstanding low on-resistance and lower gate charge performance. This advanced technology has been tailored to minimize conduction loss, provide superior switching performance..

This is 125K RFID Tag. The RFID technology is used for sensing and identifying tagged people and objects for access control, automation, and a whole range of different applications.Operating on a frequency of 125kHz, these tokens are all pre-programmed with unique ID numbers to communicate wirelessl..

Radio-frequency identification (RFID) is the wireless non-contact use of radio-frequency electromagnetic fields to transfer data, for the purposes of automatically identifying and tracking tags attached to objects. The tags contain electronically stored information. This RFID Reader is a Tiny, simpl..

It provides clock pulses of 3.579 Mhz frequency. Because these are very common and inexpensive they are used in many other applications, for example DTMF generators. It is a common clock for HT9170B DTMF decoder. It uses the mechanical resonance of a vibrating crystal of piezoelectric material to cr..

The Johnson DC Gear motor offers custom engineering solutions based on a wide range of low voltage DC and high voltage DC motor platforms. The low voltage DC platform provides power density and compact packaging options.Features of 500 RPM Johnson Gear DC Motor 12V:Rotations per minute: 500 rpm with..

TIP35C is a three layer NPN device within the working range, the collector current IC is a function of the base current IB, a change in the base current giving a corresponding amplified change in the collector current for a given collector emitter voltage VCE.Features:-Low saturation voltageSimple d..

TIP32 is a three-layer PNP device within the working range, the collector current IC is a function of the base current IB, a change in the base current giving a corresponding amplified change in the collector current for a given collector-emitter voltage VCE.Features:-Low saturation voltageSimple dr..

5mm x 15mm (5x15 mm) Neodymium Cylindrical Strong Magnet5mm (Diameter) x 15mm (Thickness) Neodymium Cylindrical Strong Magnet is very useful for hanging or holding Cylindrical shaped metal objects as well as a wide range of other magnetic applications. Rare earth neodymium magnets, also known a..

TIP3055 is a three-layer NPN device within the working range, the collector current IC is a function of the base current IB, a change in the base current giving a corresponding amplified change in the collector current for a given collector-emitter voltage VCE.Features:-Low saturation voltageSimple ..

An indicator light is mainly used on the circuit or mechanical equipment to monitor and alarm the operation status of the equipment. also, LEDs are commonly used for indicator lights (such as power on/off lights) on electronic devices. They also have several other applications, including electronic ..

TIP120 is a three-layer NPN device within the working range, the collector current IC is a function of the base current IB, a change in the base current giving a corresponding amplified change in the collector current for a given collector-emitter voltage VCE.Features:-Low saturation voltageSimple d..