Generic

TOP271EG – POWER INTEGRATIFeatures:IC Name: TOP271EGPackage/Case: SIP-7..

This NTC thermister is a transducer which converting from heat energy into electrical energy and its resistance decreases when temperature increases. The NTC temperature sensors are made from a mixture of metal oxides which are subjected to a sintering process that gives them a negative electrical r..

RS PRO Electrolytic Capacitor, Capacitance 3300 µF, Voltage 16 V DC, Model No 7111019 (Pack of 10) is a type of capacitor that uses an electrolyte as its dielectric material. It is commonly used in electronic circuits where high capacitance values and relatively large energy storage capabilities are..

This A/D converter module is used to convert the analog output signal of any sensor into digital output signal.Features of A/D Sensor And Converter:Ease to use.Easy of interfacing.Onboard I/O connector.Applications of A/D Sensor And Converter:It is used in A/D converting purposes.Multiple DIY projec..

This single digit Common anode Seven Segment Display is a light weight easy to use break out module. This single Digit Common anode Display is compatible with any circuit and any microcontroller module.Features of Single Digit Common Anode Seven Segment Display:Ease to use.Ease of interfacing.Long l..

The Common Anode Seven Segment Display is a light weight easy to use break out module. This Double Digit Common Anode Display is compatible with any circuit and any microcontroller module.Features of Double Digit Common Anode Seven Segment Display:Ease to use.Ease of interfacing.Long lasting.Applica..

The plastic nut packs are used in robotic work.Features of Plastic Nut PackEase to use.Easy of interfacing.Applications of Plastic Nut PackIt is used in Robotics.Also Searched as: Plastic nut packs...

The spacers are made up of nylon, used in providing height with mechanical strength to our boards.Features of 10 MM Spacer:Height: 10mm.Color: white.Material: Plastic.Applications of 10 MM Spacer:It is used in Robotics.Multiple DIY projects.Note: Images shown is only for representation. The actual p..

Rotary potentiometer with a variable resistance of up to 50K ohm. This potentiometer is supplied including mounting nut and washer for mounting. The shaft is approximately 1.5 cm long, perfect for the standard buttons.Product DescriptionProduct Name : PotentiometerResistance Value : 50K ohmAdjustmen..

This toggle switch features single pole, solder lug and PC thru-hole terminations. Compact size-small footprint. Multi-position and various actuators for choice. This switch is perfect for Telecommunications, Instrumentation and Medical equipment.FeaturesWide variety of actuator and termination opti..

The ADC0808 is a 28 pin DIP IC having data acquisition component digital converter, 8-channel multiplexer and is a monolithic CMOS device with an 8-bit analog-to-microprocessor compatible control logic.Features of ADC0809 8-Bit Microprocessor Compatible A/D Converters:Resolution: 8 Bits.Total Unadju..

The TL2575 and TL2575HV greatly simplify the design of switching power supplies by conveniently providing all the active functions needed for a step-down (buck) switching regulator in an integrated circuit. Accepting a wide input voltage range of up to 60 V (HV version) and available in fixed output..

The MCF5407 is manufactured in a 0.22-µ CMOS process with quad-layer-metal routing technology. This process combines the high performance and low power needed for embedded system applications. Inputs are 3.3-V tolerant; outputs are CMOS or open-drain CMOS with outputs operating from VDD + 0.5 V to G..

The TPIC6A596 is a SIPO (serial input & parallel output) type monolithic, high-voltage, high-current power logic 8-bit shift register designed for use in systems that require relatively high load power. Each channel can sink 150mA continuous, 500mA max.Features of TPIC6A596 8-Bit Shift Register:..

Blade fuses also called spade or plug-in fuses, with a plastic body and two prongs that fit into sockets, are mostly used in automobiles. Each fuse is printed with the rated current in amperes on the top.Features of 40 Amp Blade Fuse:Top Quality with Excellent Performance.Economically Priced.Easy to..

The RS232 Tester can be connected across any Serial PORT (at a SUB-D9 interface) to visually monitor the outputs on LED and set any input signals through switches. The tester is installed at an existing serial connection and offers easy testing as well as a loop-back connection test.It has male head..

TPS54231DR – 3.5-28V 2A 570kHz Adjustable Output Step-Down Converter Eco-mode ICFeatures:IC Name: TPS54231DRPackage/Case: SMD-8..

Aluminium Heat Sink 16/35 TTT MMFunction of this Aluminum Heat Sink is to cool down the Chip IC LED and make it operate safely. The aluminum heat sink reduce the risk of hardware failure because of overheating .A component called a heat sink promotes heat transfer away from a hot gadget. By expandin..

The JK Pliers are a hand tool used to hold objects firmly, possibly developed from tongs used to handle hot metal. They are also useful for bending and compressing a wide range of materials.Features of JK Plier:Made from high carbon steel, cutting edges are induction hardened of 55 to 60 HRC.More le..