Generic

This is a basic DPDT ON-OFF-ON Rocker Switch for your projects. No screws required, it simply clips into place. This is a two-pin switch that is easy to use, simply cut one of the two power wires and solder each of the ends to the unit.This 16A 250V AC DPDT ON-OFF-ON Rocker Switch is perfect for con..

12x12x7.3 mm Tactile Push Button Switch is widely used as a standard input “buttons” on electronic projects. These work best when you mount it on PCB but can also be used on a solderless breadboard for temporary connections in prototypes. The pins are normally open (disconnected) and when the button..

12x12x7.3mm Tactile Push Button Switch is widely used as a standard input “buttons” on electronic projects. These work best when you mount it on PCB but can also be used on a solderless breadboard for temporary connections in prototypes. The pins are normally open (disconnected) and when the button ..

12x12x7.3MM Round Cap for Square tactile Switch White (Pack of 5) :It is a Round Cap for Momentary Tactile Push Button Switch 12 x 12 x 7.3 mm. The cap fits on a 12 x 12 x 7.3 mm tactile push button switch. It fit perfectly on a 3.4 x 3.8 mm button square shaft with locking notch...

12x12x7.3 mm Round Cap for Square tactile Switch – Red (Pack of 5) :It is a Round Cap for Momentary Tactile Push Button Switch 12 x 12 x 7.3 mm. The cap fits on a 12 x 12 x 7.3 mm tactile push button switch. It fit perfectly on a 3.4 x 3.8 mm button square shaft with locking notch...

12x12x7.3MM Cap for Square tactile Switch Green (Pack of 5) :It is a Cap for Momentary Tactile Push Button Switch 12 x 12 x 7.3 mm. The cap fits on a 12 x 12 x 7.3 mm tactile push button switch. It fit perfectly on a 3.4 x 3.8 mm button square shaft with locking notch...

12x12x7.3MM Cap for Square tactile Switch Blue (Pack of 5) :It is a Cap for Momentary Tactile Push Button Switch 12 x 12 x 7.3 mm. The cap fits on a 12 x 12 x 7.3 mm tactile push button switch. It fit perfectly on a 3.4 x 3.8 mm button square shaft with locking notch...

12x12x7.3 mm Round Cap for Square tactile Switch – Black (Pack of 5) :It is a Round Cap for Momentary Tactile Push Button Switch 12 x 12 x 7.3 mm. The cap fits on a 12 x 12 x 7.3 mm tactile push button switch. It fit perfectly on a 3.4 x 3.8 mm button square shaft with locking notch...

12x12x12 mm Tactile Push Button Switch is widely used as a standard input “buttons” on electronic projects. These work best when you mount it on PCB but can also be used on a solderless breadboard for temporary connections in prototypes. The pins are normally open (disconnected) and when the button ..

This Momentary Metal Pushbutton Switch is a perfect choice if you are in need of a heavy-duty push-button! These metal push buttons are a very tough, small, panel-mount switch with an illuminated Yellow LED ring. It is an SPDT with 12mm threading and 1mm pitch. It gives premium look to your dashboar..

This Self-lock Non- Momentary Metal Pushbutton Switch is a perfect choice if you are in need of a heavy-duty push-button! These metal push buttons are a very tough, small, panel-mount switch with an illuminated Yellow LED ring. It is an SPDT with 12mm threading and 1mm pitch. It gives premium look t..

This Self-lock Non- Momentary Metal Pushbutton Switch is a perfect choice if you are in need of a heavy-duty push-button! These metal push buttons are a very tough, small, panel-mount switch with an illuminated Green LED ring. It is an SPDT with 12mm threading and 1mm pitch. It gives premium look to..

This Self-lock Non-Momentary Metal Pushbutton Switch is a perfect choice if you are in need of a heavy-duty push-button! These metal push buttons are a very tough, small, panel-mount switch with an illuminated Red LED ring. It is an SPDT with 12mm threading and 1mm pitch. It gives premium look to yo..

This Self-lock Non-Momentary Metal Pushbutton Switch is a perfect choice if you are in need of a heavy-duty push-button! These metal push buttons are a very tough, small, panel-mount switch with an illuminated Blue LED ring. It is an SPDT with 12mm threading and 1mm pitch. It gives premium look to y..

The 10A 250V DPDT ON-OFF-ON Rocker Switch is the simplest and easiest power control switch for your project. It comes with tabs on the top and bottom which secure it onto an enclosure without the need for any screws. On and Off positions are clearly marked which helps users identify the current swit..

This 10A 250V SPST ON-OFF Rocker Switch is the simplest and easiest power control switch for your project. It comes with tabs on the top and bottom which secure it onto an enclosure without the need for any screws. On and Off positions are clearly marked which helps users identify the current switch..

This 10A 250V SPST ON-OFF Rocker Switch is the simplest and easiest power control switch for your project. It comes with tabs on the top and bottom which secure it onto an enclosure without the need for any screws. On and Off positions are clearly marked which helps users identify the current switch..

The KCD1 10A 250V SPDT ON-OFF Rocker Switch with Light is the simplest and easiest power control switch for your project. It comes with tabs on the top and bottom which secure it onto an enclosure without the need for any screws. On and Off positions are clearly marked which helps users identify the..

2mH Color Ring DIP Inductor Axial Color Ring DIP Inductor is a small lightweight inductor. Its compact design is ideal to use in electronic devices. The inductor has a coating of epoxy resin which is resistant to humidity and thus improves the life of the same.Additionally, this inductor has re..

These momentary switch are ordinarily used in Controller panels, push-button telephones, kitchen appliances, magnetic locks, and several other mechanical and electronic devices used across homes or industries.Push buttons can be explained as simple power controlling switches of a machine or applianc..