The FT2232H-56Q is a high-speed USB 2.0 slave to dual channel UART/Serial Converter-IC designed by FTDI Chip. It features a built-in USB 2.0 Hi-Speed controller that provides a fast and reliable interface to the host PC. The device also includes two independent UART channels that can operate at baud rates of up to 40 Mbps.

The FT2232H-56Q IC is ideal for use in applications where multiple serial ports are required, such as industrial automation, test and measurement equipment, and instrumentation. It supports a wide range of protocols, including RS232, RS422, and RS485, making it compatible with a variety of devices.

The Serial Converter-IC also includes a range of advanced features, including multi-interface modes, 256-byte transmit and receive FIFOs, and support for event-driven and DMA transfer modes. It is available in a compact 56-pin VQFN package, making it easy to integrate into small form factor designs. Overall, the FT2232H-56Q Serial Converter-IC is a versatile and reliable IC that provides a flexible and high-performance solution for serial communications.

Note:

1. The product may vary in shape, color, and markings as compared to the image shown depending on availability.
2. Refer to the datasheet in the ATTACHMENTS section for more info. regd. the product.

Features:

1. Single-chip USB to dual serial/parallel ports with a variety of configurations.
2. The entire USB protocol is handled on the chip. No USB-specific firmware programming is required.
3. USB 2.0 High Speed (480Mbits/second) and Full Speed (12Mbits/second) are compatible.
4. Dual Multi-Protocol Synchronous Serial Engine (MPSSE) to simplify synchronous serial protocol (USB to JTAG, I2C, SPI, or bit-bang) design.
5. Dual independent UART or FIFO ports are configurable using MPSSEs.
6. Independent Baud rate generators.
7. RS232/RS422/RS485 UART Transfer Data Rate up to 12Mbaud. (RS232 Data Rate limited by external level shifter).
8. USB to parallel FIFO transfer data rate up to 10Mbyte/sec.
9. Single channel synchronous FIFO mode for transfers up to 40 Mbytes/sec.
10. CPU-style FIFO interface mode simplifies CPU interface design.
11. MCU host bus emulation mode configuration option.
12. Fast Opto-Isolated serial interface option.