1800W 40A DC to DC Adjustable Constant Voltage and Current Power Supply Module
1800W 40A DC to DC Adjustable Constant Voltage and Current Power Supply Module
Availability: In stock
Brand: Generic
SKU: RM015019
₹ 2,349.00
Warehouse Code: R00000-S00-P00-Z00
Product Highlights :
- Input voltage: 8 to 60V
- Input Current: 10V-30V input voltage, maximum current is 35A-40A; 31-60V input voltage, maximum current is 30A-35A
- Quiescent current: 15mA (measured at 12V to 20V, the higher output voltage will increase the quiescent current)
- Output voltage: 12 97V continuously adjustable
- Output Current: 35A MAX,
- Over 15A replace existing heatsink with bigger heatsink and fan to enhance heat dissipation
- Related to the input and output voltage difference, the greater voltage difference is, the smaller output current will be
- Constant Range: (potentiometer) 0.8-28A(+/-0.3A)
- Output Power: Input voltage * load current (less 5% loss due to efficiency)
- Working temperature: -40 to + 85 degrees (ambient temperature is too high, please enhance heat dissipation)
- Operating frequency: 150KHz
- Conversion efficiency: up to 93 to 897%
- Overcurrent protection: Yes (with reduced flow adjustment, adjustable output current limit, currently exceeds the current limit, the output current is automatically reduced to a minimum 5A, vary according to the nature of the load current.)
- Short circuit protection: Yes, 3 20A fuses are connected in parallel, which can protect the risk of accidental short circuit of output.
- Input reverse polarity protection Reverse Input Protection: Yes (150A power MOS reverse protection)
- Input Low Voltage Protection: Yes (10V-50V adjustable, self-recovery)
- Input Over Current Protection: Yes (automatically protect when input is more than 40A, and power supply voltage will not increase)
- Reverse Input Protection: Yes (150A power MOS tube, can be connected reversely for a long time)
- Output Counter filling: Yes, for charging blocking diode is not required.
- Installation Hole: Four 3mm screws
- Connection Type: Solderless terminals output
- Module dimensions (L x W x H) : 130x52x80mm
- Weight 419 gm