Relay Switch and Electronic Module
-20 %
SKU: RM002204
1- 8P onboard chip holder, install AT24C256 chip; 2 -pin power supply, on-board power indicator; 3 -onboard I2C communications required pull-up resistor; 4 -All pins are drawn and marked, and the address input pins can directly write protection jumper settings; 5-PCB board Dimens..
₹ 199.00 ₹ 249.00
SKU: RM002208
..
₹ 299.00
-50 %
SKU: RM000984
This custom designed module for the DS1302 Real Time Clock. Interfacing the DS1302 with a microprocessor is simplified by using synchronous serial communication. Only three wires are required to communicate with the clock / RAM: RST, I / O (data line), and SCLK (serial clock).Features of Real-Time C..
₹ 149.00 ₹ 300.00
SKU: RM001297
The 4 Channel Opto-Isolated Board is a 4 channel opto-isolator assembly that allows microcontroller and other logic circuits to be interfaced to both input and output signals that require opto-isolation.This board is helpful for connecting digital systems (like a 5V microcontroller) to a high-voltag..
₹ 99.00
SKU: RM000837
The SIM card holder used to hold the SIM used in different GSM based Diploma, B.TECH, M.TECH projects.Features of Robotic Sim Card Holder:Long life.Ease to use.Ease of interfacing.Applications of Robotic Sim Card Holder:These are used in different robotics applications.GSM based Electrical/Electroni..
₹ 22.00
SKU: RM001189
This is a SIM card holder breakout used for ease interface in projects for various works.Features of SIM Card Holder Breakout without SIM Card Holder:Easy to use.Easy to interface.SMD Type.Applications of SIM Card Holder Breakout without SIM Card Holder:It is used in Arduino/AVR/ARM/PIC/ projects.No..
₹ 39.00
SKU: RM001041
The module has one relay which works on 12V but the input signal can come directly from microcontroller output working at 3V or 5V to control relays. Each relay can switch variety of AC or DC high voltage, high current loads working at 110V or 220V AC mains like lights, fans, and motors and such. Th..
₹ 550.00
SKU: RM001040
The Module has one relay which works on 12V but the input signal can come directly from microcontroller output working at 3V or 5V to control relays. Each relay can switch variety of AC or DC high voltage, high current loads working at 110V or 220V AC mains like lights, fans, and motors and such. Th..
₹ 350.00
-28 %
SKU: RM001039
The board has one relay which works on 12V but the input signal can come directly from microcontroller output working at 3V or 5V to control relays. Each relay can switch variety of AC or DC high voltage, high current loads working at 110V or 220V AC mains like lights, fans, and motors and such. The..
₹ 180.00 ₹ 250.00
SKU: RM001038
The module has one relay which works on 12V but the input signal can come directly from microcontroller output working at 3V or 5V to control relays. Each relay can switch variety of AC or DC high voltage, high current loads working at 110V or 220V AC mains like lights, fans, and motors and such. Th..
₹ 140.00
SKU: RM000593
The DS3231 is a low-cost I2C RTC, with an integrated temperature-compensated crystal oscillator (TCXO) and crystal. Compared to the DS1302 solution, the DS3231 has many advantages, it function with a VCC ranging from 2.3V to 5.5V and has a battery backup. Unlike the DS1307, the DS3231 also has an in..
₹ 240.00
SKU: RM001429
Arduino iic/i2c interface was developed to reduce the io port usage on the Arduino board. Old 1602 screen requires 7 io ports but this module uses only two. Much needed control panel io ports can be used to add some sensors, sd card and so on.Features:Supply voltage: 5VThe backlight and contrast is ..
₹ 99.00
SKU: RM001036
The board has one relay which works on 12V but the input signal can come directly from microcontroller output working at 3V or 5V to control relays. Each relay can switch variety of AC or DC high voltage, high current loads working at 110V or 220V AC mains like lights, fans, and motors and such. The..
₹ 120.00
-25 %
SKU: RM000440
What are Real-Time Clocks?Real-time clocks (RTC), as the name recommends are clock modules. The DS1307 real-time clock (RTC) IC is an 8 pin device using an I2C interface. The DS1307 is a low-power clock/calendar with 56 bytes of battery backup SRAM. The clock/calendar provides seconds, minutes, hour..
₹ 150.00 ₹ 199.00
SKU: RM000065
This 5V control Single-Pole Double-Throw (SPDT) High-level trigger AC power relay board can be controlled directly via a microcontroller and switch up to 10A at 250 VAC. The inputs of 1 Channel 5V Relay Module are isolated to protect any delicate control circuitry.The default state of the relay when..
₹ 59.00
SKU: RM000031
RS 232 Signal to TTL Convertor Module extensively used in Serial Communication between PC and any TTL Compatible Device. Ideal for microcontroller board designed by Robomart.com India. The control circuit for the module is based on Max232 circuit which makes it a full duplex RS232 to TTL converter. ..
₹ 125.00
SKU: RM000952
The ENC28J60 is a stand-alone Ethernet controller with an industry standard Serial Peripheral Interface (SPI). It is designed to serve as an Ethernet network interface for any controller equipped with SPI.Features of ENC28J60 LAN Ethernet Network Board Module:IEEE 802.3 compatible Ethernet controlle..
₹ 369.00
SKU: RM000327
The 6v relay is an electromechanical switching device which controls the AC devices through the DC power.Features of Relay 6V:Max Current: 5A AC/DC (max).Max Voltage: 250V AC/30V DC.Nominal Voltage: 6V.Coil resistance: 270Ω.Coil Current: 44.4Ma.Operating Voltage: 4.5 to 25V.Applications of Relay 6V:..
₹ 30.00