Search

5-9 V 5MM Green LED Metal Indicator Light with Wire (Pack of 5)An indicator light is mainly used on the circuit or mechanical equipment to monitor and alarm the operation status of the equipment. also LEDs are commonly used for indicator lights (such as power on/off lights) on electronic devices. Th..

6mm x 3mm (6x3 mm) Neodymium Disc Strong Magnet6mm (Diameter) x 3mm (Thickness) Neodymium Disc Strong Magnet is very useful for hanging or holding circular or disc shaped metal objects as well as a wide range of other magnetic applications. Rare earth neodymium magnets, also known as NdFeB magn..

8mm x 3mm (8x3 mm) Neodymium Disc Strong Magnet8mm (Diameter) x 3mm (Thickness) Neodymium Disc Strong Magnet is very useful for hanging or holding circular or disc shaped metal objects as well as a wide range of other magnetic applications. Rare earth neodymium magnets, also known as NdFeB magn..

2.54mm DC3 20 Pin Straight Female IDC Socket, is an IDC socket connector used to make physical connections in a variety of applications. They are common in industrial applications, where the accuracy of connections, the ability to make them reliable and where there may be many wires that need to be ..

This miniature ultra-slim loudspeaker is just 10mm in thickness and has a paper cone.Made of quality paper/PP material/wool.No water absorption, moisture resistance. Insulation, heat insulation, cold resistance and exposureAntibacterial, non-toxic, tasteless, non-pollutingResilience and high tensile..

Insulated Cord End Lugs are having high conductivity and are corrosion resistant. It is suitable for applications in Energy Distribution Boards, Machines, Panels, Switch Boards etc.Color BlueConnector Type PinContact Material CopperStud Size 8 millimetersTerminal Ring TerminalMaterial CopperModel LG..

A light-emitting diode (LED) is a two-lead semiconductor light source. It is a p–n junction diode, which emits light when activated. When a suitable voltage is applied to the leads, electrons are able to recombine with electron holes within the device, releasing energy in the form of photons. This e..

A light-emitting diode (LED) is a two-lead semiconductor light source. It is a p–n junction diode, which emits light when activated. When a suitable voltage is applied to the leads, electrons are able to recombine with electron holes within the device, releasing energy in the form of photons. This e..

A photoresistor or LDR 5mm - Light Dependent Resistor is a resistor whose resistance decreases with increasing incident light intensity; in other words, it exhibits photoconductivity.A photo-resistor is made of a high resistance semiconductor. If light falling on the device is of high enough frequen..

Yellow 12x12x7.3mm Tactile 4 Pin Push Button Switch is fully compatible to Omron B3F-4055 Switch. It has 4 pins, 2 pins of each side are connected to each other. So, pressing the switch, connects all 4 pins. It has current capacity of 100 mA. The top of the switch is such that, cap can be easil..

Robosapiens 69mm wheel size offers quick acceleration for getting the lead out of the starting line. We highly recommend these wheels for courses that involve a lot of sharp turns and drifting. Get the most out of your Motor and race ahead.Features of Robosapiens 69mm Wheel:Anti-slip Rubber grip.Hig..

In electronics and electrical engineering, a fuse is a type of low resistance resistor that acts as a sacrificial device to provide over current protection, of either the load or source circuit. It’s essential component is a metal wire or strip that melts when too much current flows through it, inte..

Link Connector 150 mm is made from high quality stainless steel. Multiple link connectors can be connected to one another to increase length...

10PCS HSS DRILL BIT SET - HIGH SPEED STEEL - BLACK OXIDE FINISH - WITH INDEX HIGH SPEED STEEL DRILL BIT SETS These basic drill bits are made from high speed steel that meets or exceeds the federal specifications for industrial ratings. They are rated for drilling in most metals and all types of wo..

This 1 Amp Cartridge Miniature Fuse (6mmx31mm) is a fast acting glass tube cartridge fuse. It is an electrical safety device that operates to provide overcurrent protection of an electrical circuit. Its essential component is a zinc wire or strip that melts when too much current flows through it. Th..

This module based on DIP chip nRF24L01+, highly integrated, ultra low power (ULP) 2Mbps RF transceiver for the 2.4GHz ISM (Industrial, Scientific and Medical) band. Nordic nRF24L01+ integrates a complete 2.4GHz RF transceiver, RF synthesizer, and baseband logic including the Enhanced Shock Burst™ ha..

This is a common cathode RGB LED breakout module used in different color sensor application.Features of Common Cathode RGB Led Breakout:Easy to use.Easy to interface.Long life.Applications of Common Cathode RGB Led Breakout:It is used in robotics.Multiple DIY projects and circuit construction.Line f..

This 5MM LED breakout module is available in robomart for versatile use.Features of LED Breakout 5MM:Easy to use.Easy to interface.Long life.Large led.Applications of LED Breakout 5MM:It is used in Arduino/AVR/ARM/PIC/ projects.Note: Images shown is only for representation. The actual product may va..

This tactile switch breakout module is available in robomart for versatile use.Features of Tactile Switch Breakout (12 MM):Easy to use.Easy to interface.Long life.Large switch.Applications of Tactile Switch Breakout(12 MM):It is used in Arduino/AVR/ARM/PIC/ projects.Note: Images shown is only for re..

This tactile switch breakout module is available in robomart for versatile use.Features of Tactile Switch Breakout:Easy to use.Easy to interface.Long life.Applications of Tactile Switch Breakout:It is used in Arduino/AVR/ARM/PIC/ projects.Note: Images shown is only for representation. The actual pro..