Search

The MPU6050-Breakout board is a small integrated 6-axis motion tracking device that combines 3-axis accelerometer and 3-axis gyroscope. MPU6050 is a very advanced chip which has an inbuilt accelerometer, a gyro and a temperature sensor; also the chip can control external magnetometer and other senso..

The P89V51RB2/RC2/RD2 are 80C51 microcontrollers with 16/32/64 kB flash and 1024 B of data RAM. A key feature of the P89V51RB2/RC2/RD2 is its X2 mode option. The design engineer can choose to run the application with the conventional 80C51 clock rate (12 clocks per machine cycle) or select the X2 mo..

The high-performance, low-power Atmel 8-bit AVR RISC-based microcontroller combines 16KB ISP flash memory, 1KB SRAM, 512B EEPROM, an 8-channel/10-bit A/D converter (TQFP and QFN/MLF), and debugWIRE for on-chip debugging. The device supports a throughput of 20 MIPS at 20 MHz and operates between 2.7-..

The Atmel 89C51 Microcontroller or commonly known as AT89C51 is a low-power, high-performance CMOS 8-bit microcomputer with 4K bytes of Flash programmable and erasable read only memory (PEROM). The device is manufactured using Atmel’s high-density nonvolatile memory technology and is compatible with..

The high-performance, low-power Atmel 8-bit AVR RISC-based microcontroller combines 16KB ISP flash memory, 1KB SRAM, 512B EEPROM, an 8-channel/10-bit A/D converter (TQFP and QFN/MLF), and debugWIRE for on-chip debugging. The device supports a throughput of 20 MIPS at 20 MHz and operates between 2.7-..

The MCF5407 is manufactured in a 0.22-µ CMOS process with quad-layer-metal routing technology. This process combines the high performance and low power needed for embedded system applications. Inputs are 3.3-V tolerant; outputs are CMOS or open-drain CMOS with outputs operating from VDD + 0.5 V to G..

The ATMEGA8535 is a low-power CM OS 8-bit microcontroller  based on the AVR enhanced RISC architecture.  By executing instructions in a single clock cycle, the ATMEGA8535 Microcontroller achieves throughputs approaching 1 MIPS per MHz allowing the system designer to optimize power consumpt..

The AT89S2051 is a low-voltage, high-performance CMOS 8-bit microcontroller with 2K/4K bytes of In System Programmable (ISP) Flash program memory. The device is manufactured using Atmel’s high density nonvolatile memory technology and is compatible with the industry-standard MCS-51 instruction set.F..

HMC5883L-BB is a breakout board of HMC5883L, a 3-axis digital magnetometer designed for low-field magnetic sensing. The HMC5883L includes high-resolution HMC118X series magneto-resistive sensors plus an ASIC containing amplification, automatic degaussing strap drivers, offset cancellation, and a 12-..

The ATMEGA128 Development Board is a powerful development platform based on ATMEGA128 microcontroller which is one of the most feature rich AVR microcontroller from Atmel, featuring 128K Flash, 4K RAM, 53 I/O lines arranged in seven 8 bit ports, 8 ADCs, 2 UARTs, 4 timers, 8 interrupts and much more...

The PIC Standalone + ICSP Serial Programmer for PIC microcontroller is a highly useful low cost PIC programmer. As the name indicates it is interfaced via serial port. Using this you can program 8-pin, 18-pin, 28-pin,40-pin micro controllers. It supports almost PIC12XXXX, PIC16XXXX, and PIC18FXXXX s..

The Arduino Pro Mini is intended for advanced users who require flexibility, low-cost, and small size. It comes with the minimum of components (no on-board USB or pin headers) to keep the cost down. Be sure to provide the correct power and use components whose operating voltage matches that of the b..

The AVR/8051 USB programmer is an in-circuit programmer for Atmel AVR/8051 controllers. The programmer uses a firmware-only USB driver; no special USB controller is needed. It is complete solution for programming popular AVR/8051 series of micro controllers with ease. This is a USB based programmer...

This AVR Parallel Port Programmer can be used for in-system programming for Atmel ISP programmable devices. The programming interface is compatible to STK200 ISP programmer hardware so the users of STK200 can also use the software which can program both the 8051 and AVR series devices.Features of AV..

The AVR Serial Programmer simple COM PORT based AVR at-mega Programmer will allow you to easily transfer hex programs to most ATMEL AVR microcontrollers. It is more reliable than most other simple AVR programmers available out there and can be used without a usb port.Features of AVR Serial Programme..

The Atmel AT89S52 Microcontroller or commonly known as AT89S52 is a low-power, high-performance CMOS 8-bit microcontroller with 8K bytes of in-system programmable Flash memory. The device is manufactured using Atmel’s high-density nonvolatile memory technology and is compatible with the industry-sta..

AVR USB programmer is an in-circuit programmer for Atmel AVR controllers. The programmer uses a firmware - only USB driver; no special USB controller is needed.It is complete solution for programming popular AVR series of micro controllers with ease. It can be used with Low Cost ATmega development b..

The high-performance, low-power Atmel 8-bit AVR RISC-based microcontroller combines 8KB ISP flash memory, 1KB SRAM, 512B EEPROM, an 7-channel/10-bit A/D converter (TQFP and QFN/MLF), and debugWIRE for on-chip debugging. The device supports a throughput of 16 MIPS at 16 MHz and operates between 4.5-5..

Atmega8 mini Robotics Development Board V4.0 is a complete starter kit and development system for the AVR Atmega8 microcontrollers from ATMEL ® Corporation. It is designed to give beginners a quick start to develop code on the AVR. This kit is one of the most recent development kit for both student,..