Shop
Showing 4105–4111 of 4111 resultsSorted by price: low to high
-
Raspberry Pi Board & Accessories
Razberry z wave controller for the raspberry pi
Product Highlights
- Very solid programming environment, all scripts are open source
- Home automation modules implement the intelligence of the system
- HTTP REST API: allow other devices of different protocol to access Z-Way, vice versa
- Highly secured communication
- Easy to use interfaces
SKU: RM001363 -
Drone Flight Controller and Accessories
DJI Naza M Lite Multi-Rotor Stabilization Flight Controller FC without GPS
-3%
Drone Flight Controller and AccessoriesDJI Naza M Lite Multi-Rotor Stabilization Flight Controller FC without GPS
Product Highlights
- Input Voltage (V): MC: 4.8V~5.5V (recommended 2S~6S Lipoly).
- Power Consumption: MAX: 1.5W (0.3A @ 5V), Normal: 0.6W (0.12A @ 5V).
- Operating Temperature:-10?C ~ +50?C.
- Supported ESC Output: 400Hz refresh frequency
SKU: RM000992 -
Arduino Board and Accessories
APM2.6 ArduPilot Flight Control Board with Protective Case for RC Quadcopter/Multicopter
-4%
Arduino Board and AccessoriesAPM2.6 ArduPilot Flight Control Board with Protective Case for RC Quadcopter/Multicopter
Product Highlights
- Optional off-board GPS, uBlox LEA-6H module with Compass.
- One of the first open source autopilot systems to use Invensense’s 6 DoF Accelerometer/Gyro MPU-6000.
- Barometric pressure sensor upgraded to MS5611-01BA03, from Measurement Specialties.
- Atmel’s ATMEGA2560 and ATMEGA32U-2 chips for processing and usb functions respectively.
SKU: RM001284 -
Drone Flight Controller and Accessories
Pixhawk 2.4.8 Drone Flight Controller PX4 32 Bit Autopilot Flight Control Board
-3%
Drone Flight Controller and AccessoriesPixhawk 2.4.8 Drone Flight Controller PX4 32 Bit Autopilot Flight Control Board
Product Highlights:
- Supply Voltage: 7V.
- Processor: 32 Bit Cortex M4 Core
- Bus interface (UART, I2C, SPI, CAN).
- Firmware: Mission planner.
- Sensors: Gyrometer, Accelerometer, Barometer & Magnetometer& Micro SD card to record flight data.
SKU: RM001255 -
Raspberry Pi Board & Accessories
Raspberry Pi 5 Model 4GB
Product Highlights:
- 2.4GHz quad-core, 64-bit Arm Cortex-A76 CPU, with 512KB L2 caches and a 2MB shared L3 cache
- VideoCore VII GPU
- LPDDR4X-4267 4GB SDRAM
- 2.4 GHz and 5.0 GHz 802.11ac Wi-Fi
- Bluetooth 5.0 / Bluetooth Low Energy (BLE)
- Micro SD card slot, with support for high-speed SDR104 mode
- 2 ? USB 3.0 ports, supporting simultaneous 5Gbps operation
- 2 ? USB 2.0 ports
- Gigabit Ethernet, with PoE+ support (requires PoE+ HAT)
- 2 ? 4 lane MIPI camera/display transceivers
- PCIe 2.0 x1 interface for fast peripherals
- 5V/5A DC power (PD enabled)
- Raspberry Pi standard 40-pin header
- Real-Time Clock (RTC), powered by an external battery
- On-board power button!!
SKU: RM003913 -
Raspberry Pi Board & Accessories
Raspberry Pi 5 Model 8GB
Product Highlights :
- 2.4 GHz and 5.0 GHz 802.11ac Wi-Fi
- Bluetooth 5.0 / Bluetooth Low Energy (BLE)
- Micro SD card slot, with support for high-speed SDR104 mode
- 2 ? USB 3.0 ports, supporting simultaneous 5Gbps operation
- 2 ? USB 2.0 ports
- Gigabit Ethernet, with PoE+ support (requires PoE+ HAT)
- 2 ? 4 lane MIPI camera/display transceivers
- PCIe 2.0 x1 interface for fast peripherals
- 5V/5A DC power (PD enabled)
- Raspberry Pi standard 40-pin header
- Real-Time Clock (RTC), powered by an external battery
- On-board power button!!
SKU: RM014609 -
Microcontroller ICs
RP2040 Microcontroller IC by Raspberry PI REEL of 500
Product Highlights
- Dual ARM Cortex-M0+ @ 133MHz
- 264kB on-chip SRAM in six independent banks
- Support for up to 16MB of off-chip Flash memory via dedicated QSPI bus
- DMA controller
- Fully-connected AHB crossbar
- Interpolator and integer divider peripherals
- On-chip programmable LDO to generate the core voltage
- 2 on-chip PLLs to generate USB and core clocks
- 30 GPIO pins, 4 of which can be used as analog inputs
SKU: RM018016
