Development Board
Showing 49–72 of 132 resultsSorted by price: low to high
-
AVR Development & Breakout Board
ATTINY85 Mini USB Development Board
Product Highlights
- High Performance, Low Power AVR? 8-Bit Microcontroller
- Non-volatile Program and Data Memories
- 512 Bytes In-System Programmable EEPROM
- 512 Bytes Internal SRAM
- USI ? Universal Serial Interface (12C, SPI, 1-wire) with Start Condition Detector
- 10-bit ADC
- 4 Single Ended Channels
- Two Differential ADC Channel Pairs with Programmable Gain (1x, 20x)
- Low Power Consumption
- Active Mode:1 MHz, 1.8V: 300 ?A
SKU: RM008567 -
Arduino Board and Accessories
Nano Board R3 With Ch340 Chip Without USB Cable Compatible With Arduino Type C (Unsoldered)
-23%
Arduino Board and AccessoriesNano Board R3 With Ch340 Chip Without USB Cable Compatible With Arduino Type C (Unsoldered)
Product Highlights
- Microcontroller : Atmel ATmega168 or ATmega328.
- Type C Port
- Operating Voltage (logic level) : l5 V.
- Input Voltage (recommended) : 7-12 V.
- Input Voltage (limits) : 6-20 V.
- Digital I/O Pins : 14 (of which 6 provide PWM output).
SKU: RM018305 -
Arduino Board and Accessories
Nano Board R3 With Ch340 Chip Without USB Cable Compatible With Arduino Type C (Soldered)
-21%
Arduino Board and AccessoriesNano Board R3 With Ch340 Chip Without USB Cable Compatible With Arduino Type C (Soldered)
Product Highlights
- Microcontroller : Atmel ATmega168 or ATmega328.
- Type C Port
- Operating Voltage (logic level) : l5 V.
- Input Voltage (recommended) : 7-12 V.
- Input Voltage (limits) : 6-20 V.
- Digital I/O Pins : 14 (of which 6 provide PWM output).
SKU: RM018304 -
-
Wireless Controller Board and Module
HC-05 Wireless Bluetooth Module without Base Plate
Product Highlights:
- Working current: matching for 30 mA, matching the communication for 8 mA.
- Dormancy current: no dormancy.
- Used for a GPS navigation system, water, and electricity gas meter reading system.
- With the computer and Bluetooth adapter, PDA, seamless connection equipment.
- Bluetooth module HC-08 Master and slave Two in one module.
- Use the CSR mainstream Bluetooth chip, Bluetooth V2.0 protocol standards.
- Potter default rate of 9600, the user can be set up.
- Bluetooth protocol: Bluetooth Specification v2.0+EDR
- Speed: Asynchronous: 2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps.
- Security: Authentication and encryption.
- Profiles: Bluetooth serial port.
SKU: RM007679 -
-
Arduino Board and Accessories
Nano Board R3 with CH340 chip without USB Cable compatible with Arduino (Unsoldered)
-7%
Arduino Board and AccessoriesNano Board R3 with CH340 chip without USB Cable compatible with Arduino (Unsoldered)
Product Highlights
- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- Standard 0.1? spacing DIP (breadboard friendly).
SKU: RM008556 -
Arduino Board and Accessories
Uno R3 CH340G ATmega328p Development Board Compatible with Arduino
Product Highlights
- Microcontroller ATmega328 (SMD) ? Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 5-20V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: RM008552 -
AVR Development & Breakout Board
ATTINY85 USB Development Board
Product Highlights
- Support for the Arduino IDE 1.0 + (OSX/Windows/Linux).
- Power via USB or External Source or 7-16 v to 5 v (automatic selection).
- The Onboard, 150 ma 5 v Regulator.
- Built-in USB and serial were debugging).
- 6 I/O Pins (2 inform the for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB).
- 8 k Flash Memory (about 6 k after bootloader).
- The I2C and SPI (vis USI).
- The Power LED and the Test/Status LEDs.
SKU: RM008566 -
Raspberry Pi Board & Accessories
Raspberry Pi 3 Case for Raspberry Pi B+ Pi 2 Pi 3
Product Highlights:
- Optional clip-on lid provides protection but can be removed if using a HAT
- All primary ports (including microSD) accessible
- Removable side plate allows access to those wonderful GPIO pins
- Snug and secure fit protect your Pi while looking great!
SKU: RM001334 -
Arduino Board and Accessories
Arduino Uno R3 Board without USB
Product Highlights:
- Microcontroller: ATmega328.
- Operating Voltage: 15V.
- Input Voltage: 7-12V.
- Digital I/O Pins: 14 (of which 6 provide PWM output).
- Analog Input Pins: 6.
- DC Current: 40mA.
- Flash Memory: 32 KB.
- SRAM: 2 KB.
- EEPROM: 1 KB
SKU: RM000058 -
Arduino Board and Accessories
XD-05 Data Logger for Arduino
Product Highlights
- Could save data to any FAT16 / FAT32 SD card
- Real-time reading; With RTC batterySD card interface compatible with FAT16/FAT32 format
- 3.3V level transmit circuit
- Compatible with Arduino UNO: Duemilanove, Diecimila, Leonardo, ADK/Mega R3 or above
SKU: RM000951 -
Wireless Controller Board and Module
SI4432 Wireless Module 1000 Meters Long Distance 433mhz
Product Highlights:
- This wireless module (transmitter and receiver) based on the si443 chipset; Ranges up to 1000 meters can be achieved
- Module integrates all rf-related features and components; User even does not need to understand the knowledge of radio, you can easily develop a stable and reliable
- Transmission distance (maximum): 1000 meters
- Frequency range: 433mhz ism
- Max data rate = 0123 To 256 kbps
SKU: RM002212
