Product Carousel Tabs
AVR Development & Breakout Board
Atmega8 mini Robotics Development Board V4.0
Product Highlights
8Kbytes of In-System Self-programmable Flash program memory.
512Bytes EEPROM.
1Kbyte Internal SRAM.
5.0V – 24V.
Power Consumption at 4Mhz, 3V, 25?C.
Active: 3.6mA.
Idle Mode: 1.0mA.
Power-down Mode: 0.5?A
SKU: RM000006
AVR Development & Breakout Board
AVR USB Programmer (USBASP)
Product Highlights
Works under multiple platforms. Linux, Mac OS X and Windows are tested.
No special controllers or smd components are needed.
Programming speed is up to 5kBytes/sec.
Planned: serial interface to target (e.g. for debugging).
Compatible with Windows XP, Windows Vista and Windows 7. Both 32bit and 64bit versions are supported.
SKU: RM000008
Relay Switch and Electronic Module
USB to TTL(Rx, Tx) Converter
Product Highlights
Fully compliant with USB Specification v1.1 and USB CDC v1.1.
Supports automatic handshake mode.
Supports Remote wake-up and power management .
256-bytes buffer each for upstream and downstream data flow .
Supports default ROM or external EEPROM for device configuration .
On-chip USB transceiver .
On-chip crystal oscillator running at 12MHz .
SKU: RM000010
Motion Light and Sound Sensor
Light Searching Sensor
Product Highlights
Sleek Design
Designed for Robosapiens Development Boards.
Can be interfaced with other Development Boards Like Arduino, Arm 7, Arm 9, Arm 11 etc. by using pin connectors.
Presence of sunlight can be detected using the Sensor.
SKU: RM000012
Motion Light and Sound Sensor
Sound Sensor
Product Highlights
Detection range up to 3 meters away.
Adjustable range of detection.
Single bit active – high output.
Built – in series resistor for compatibility with the microcontroller and other 3.3 V devices.
3 – pin SIP header make it ready to use for breadboard or Robomart?s Development Boards.
SKU: RM000018
Computers & Laptops
Smartphones & Tablets
Trending products
See All Trending products
Relay Switch and Electronic Module
ENC28J60 LAN Ethernet Network Board Module
Product Highlights
IEEE 802.3 compatible Ethernet controller.
Integrated MAC and 10BASE-T PHY.
Receiver and collision squelch circuit.
Supports one 10BASE-T port with automatic.
polarity detection and correction.
SKU: RM000952
Electronic Switches Button and Keypads
19mm Metal Push On/Off Button Switch Anti-Vandal Latching Ring LED Green 5 Pin
Electronic Switches Button and Keypads
19mm Metal Push On/Off Button Switch Anti-Vandal Latching Ring LED Green 5 Pin
Product Highlights:
Panel Mount Industrial Switches with Inbuilt Indication
Switch Thread Size: 19mm
No of Poles: 1 Pole. (C, NO, and NC Terminals)
Switch Operation MTBF: 50,000 cycles
LED Life: 50,000 working hours
LED Type: Blue with Ring Symbol
LED Operating Voltage: 12-24V
Stainless Steel Body
IP65 Waterproof Rating
Tamper Resistant
LED Ring Symbol.
SKU: RM002643
Neodymium Block Magnets
8mm x 3mm (8×3 mm) Neodymium Disc Strong Magnet
Product Highlights:
Shape: Disc/Circular
Dimensions: 8mm diameter x 3mm thickness
Quantity: 01 Pcs
Plating /Coating: Ni-Cu-Ni (Nickel)
Tolerance: +/- 0.1
Material: Neodymium Magnets (NdFeB)
Magnetization Direction: Diameter
Max Operating Temp: 176?F (80?C)
Ages:7+ ages, both for kids and adults
SKU: RM002723
Neodymium Block Magnets
6mm x 6mm (6×6 mm) Neodymium Cylindrical Strong Magnet
Product Highlights:
Shape: Cylindrical
Dimensions: 6mm diameter x 6mm thickness
Quantity: 01 Pcs
Plating /Coating: Ni-Cu-Ni (Nickel)
Tolerance: +/- 0.1
Material: Neodymium Magnets (NdFeB)
Magnetization Direction: Diameter
Max Operating Temp: 176?F (80?C)
Ages:7+ ages, both for kids and adults
SKU: RM001469
Jumper Wires Connectors FRC and Interfacing Cables
8 Pin Barrier Terminal Block Connector with Flap Cover Lid ? 9.5 mm (Pack of 1)
Jumper Wires Connectors FRC and Interfacing Cables
8 Pin Barrier Terminal Block Connector with Flap Cover Lid ? 9.5 mm (Pack of 1)
Product Highlights:
8 Pin Barrier Terminal Block Connector
Rated voltage: 300V
Rated current: 20A
Contact resistance: 20m?
Barrier Terminal Blocks Pitch: 9.5mm
SKU: RM002707
Headphones & Virtual Reality
Your Recently Viewed Products
Buck Converter Step-Down
AMS1117 3.3V Power Supply Module
Product Highlight:
Input: DC 4.5V ? 12V (input voltage must be more than output voltage (more than 1V))
Output: 3.3V, 800mA (load current cannot exceed 800ma)
Onboard AMS1117 chip.
Onboard power indicator to indicate power is turned on: Red LED.
Small Compact Size, 4Pin Type, Breadboard Friendly.
Dual-panel design, the layout is nice
SKU: RM007532
