Shop
Showing 5881–5904 of 6386 resultsSorted by price: low to high
-
IMU Accelerometer Magnetometer and Gyroscope
MPU6500 Gyroscope/Accelerometer/Digital Motion Processor (DMP) 6-axis Motion Sensor with I2C/SPI Interface
IMU Accelerometer Magnetometer and GyroscopeMPU6500 Gyroscope/Accelerometer/Digital Motion Processor (DMP) 6-axis Motion Sensor with I2C/SPI Interface
Product Highlights:
- Acceleration and Gyroscope
- Power Supply: DC3.3V-5V
- Chip: MPU9250
- Size: 22 mm x 17 mm.
- Gyro range : ? 250 500 1000 2000 ? / s
- Acceleration range: ? 2 ? 4 ? 8 ? 16g
- 6 DOF modules
SKU: RM015625 -
-
SMPS Power Supply
AC 110/240V DC 5V/10A (50W) Metal Housing Switching Mode Power Supply
Product Highlights:
- Input Voltage: AC 100 – 264V 50 / 60Hz
- Output Voltage: 5V DC, 10A
- Output voltage: Adjustment Eange: ?20%
- Protections: Overload / Over Voltage / Short Circuit
- Auto-Recovery After Protection
SKU: RM018125 -
Motion Light and Sound Sensor
BH1750FVI Digital Light Intensity Sensor Module
Product Highlights
- I2 C bus Interface ( f / s Mode Support ).
- Spectral responsibility is approximately human eye response.
- Luminance to Digital Converter.
- Wide range and High resolution. ( 1 – 65535 lx ).
- Low Current by power down function.
SKU: RM000442 -
Wire Wound Inductor
24 uH HHBC8S-0R6A0024V High Current Toroidal Inductor
Product Highlights
- Rated Current Range: 2 ? 30 A
- Rated Inductance Range: 24 ? 311 ?H at 0 A ?20%
- Inductance Measurement Condition: 100 kHz, 1 mA
- Wire Type: 1 UEW & 1 PEW
- Operating Temperature Range: ?40?C to +125?C (include self temperature rise)
SKU: RM005837 -
-
-
-
3D Printers and Parts
17HS4401S NEMA 17 Stepper Motor 40mm
- Number of Phase 2
- Step Angle: 1.8?.
- Phase Voltage: 2.6Vdc.
- Phase Current: 1.7A.
- Resistance/Phase: 1.5? ?10%.
- Inductance: 2.8mH ?20% (1KHz).
- Number of Wire: 4 (100cm Length).
- Holding Torque: 43Ncm.
- Shaft Diameter: ?5mm.
- Motor Length: 40mm
SKU: RM018071 -
Arduino Board and Accessories
Arduino Uno R3 Board without USB
Product Highlights:
- Microcontroller: ATmega328.
- Operating Voltage: 15V.
- Input Voltage: 7-12V.
- Digital I/O Pins: 14 (of which 6 provide PWM output).
- Analog Input Pins: 6.
- DC Current: 40mA.
- Flash Memory: 32 KB.
- SRAM: 2 KB.
- EEPROM: 1 KB
SKU: RM000058
