Shop
Showing 5641–5664 of 6386 resultsSorted by price: low to high
-
-
Interface ICs
FT232HL- Single Channel Hi-Speed USB to Multipurpose UART/FIFO-IC
Product Highlights
- Data Rates: 12Mbaud (UART) up to 40MB/s (Sync FIFO)
- USB Transfer Modes: Bulk
- Interfaces: UART, FIFO, 1 x MPSSE, Fast serial, 8051 MCU emulation, FT1248
- I/O Voltage: 3.3V
- Operating Temperature: -40?C to +85?C
SKU: RM017737 -
Rechargeable Battery
Ni-Cd 4500mAh 7.2v AA Cell Battery Pack with SM Connector
Product Highlights:
- Battery Cell Composition : Ni-Cd
- Output Voltage: 7.2v
- Current Capacity: 4500mAh
- Modal: AA*6-Cell with Two Pin SM Connector
- Rechargeable: Yes
- Product Dimension: 80(L) x 47(W) x 13(H) (in mm)
SKU: RM018265 -
Jumper Wires Connectors FRC and Interfacing Cables
1.5m HDMI-Male to 3 RCA Video Audio AV Cable Connector For HDTV 1080P
Jumper Wires Connectors FRC and Interfacing Cables1.5m HDMI-Male to 3 RCA Video Audio AV Cable Connector For HDTV 1080P
Product Highlights
- 1080p certification.
- Support for new audio formats, such as Dolby True HD.
- Support for x. v. YCC color space.
- Support for other specific resolutions, features and protocols.
- 120Hz" or "240Hz" support.
SKU: RM000418 -
3D Printers and Parts
Double BTS7960 43A H-bridge High-Power Stepper Motor Driver Module Arduino for Arduino/Robotics
3D Printers and PartsDouble BTS7960 43A H-bridge High-Power Stepper Motor Driver Module Arduino for Arduino/Robotics
Product Highlights:
- Double BTS7960 large current (43A) H-Bridge motor driver.
- 5v isolate with MCU, and effectively protect MCU.
- Can solder heat sink.
- Supply voltage: 5.5-27 voltage.
- PWM I/P: 25 KHZ.
SKU: RM000445 -
Tools
41 pc. Combination Tool Set with Bits and Sockets
Product Highlights :
- 1 bit adapter, 1 to 3 Reversible Ratchet Driver, 7 torx bit, 2 slotted bit, 2 square bit, 3 Phillips Bit and one Blown Mould Plastic Case.
- Manufactured by leading brand.
- Screw driver set offers high level usage anywhere, anytime.
SKU: RM000479 -
Arduino Board and Accessories
XD-05 Data Logger for Arduino
Product Highlights
- Could save data to any FAT16 / FAT32 SD card
- Real-time reading; With RTC batterySD card interface compatible with FAT16/FAT32 format
- 3.3V level transmit circuit
- Compatible with Arduino UNO: Duemilanove, Diecimila, Leonardo, ADK/Mega R3 or above
SKU: RM000951 -
Wireless Controller Board and Module
SI4432 Wireless Module 1000 Meters Long Distance 433mhz
Product Highlights:
- This wireless module (transmitter and receiver) based on the si443 chipset; Ranges up to 1000 meters can be achieved
- Module integrates all rf-related features and components; User even does not need to understand the knowledge of radio, you can easily develop a stable and reliable
- Transmission distance (maximum): 1000 meters
- Frequency range: 433mhz ism
- Max data rate = 0123 To 256 kbps
SKU: RM002212 -
-
Microcontroller ICs
ATmega328P-U Microcontroller for Arduino
Product Highlights
- Up to 20MIPS throughput at 20MHz
- On-chip 2-cycle multiplier
- Write/erase cycles: 10,000 flash/100,000 EEPROM
- Optional boot code section with independent lock bits
- In system programming by on-chip boot program
- True read while write operation
SKU: RM002940 -
-
-
Boost Converter Step-Up
DC-DC 250W 4-40V Adjustable Step Up Boost Converter Constant Current Vehicle LED Driver 10A Max Input with Wire
Boost Converter Step-UpDC-DC 250W 4-40V Adjustable Step Up Boost Converter Constant Current Vehicle LED Driver 10A Max Input with Wire
Product Highlights:
- Module Type: Boost Step-Up DC-DC Converter
- Power Rating: 250W
- Current Capacity: 10A Constant Current
- Input Voltage Range: 3-35V
- Output Voltage Range 4-40V (Continuously Adjustable, Default: 19V)
SKU: RM008602
