Shop
Showing 5209–5232 of 6386 resultsSorted by price: low to high
-
AVR Development & Breakout Board
AVR USB Programmer (USBASP)
Product Highlights
- Works under multiple platforms. Linux, Mac OS X and Windows are tested.
- No special controllers or smd components are needed.
- Programming speed is up to 5kBytes/sec.
- Planned: serial interface to target (e.g. for debugging).
- Compatible with Windows XP, Windows Vista and Windows 7. Both 32bit and 64bit versions are supported.
SKU: RM000008 -
Motion Light and Sound Sensor
Light Searching Sensor
Product Highlights
- Sleek Design
- Designed for Robosapiens Development Boards.
- Can be interfaced with other Development Boards Like Arduino, Arm 7, Arm 9, Arm 11 etc. by using pin connectors.
- Presence of sunlight can be detected using the Sensor.
SKU: RM000012 -
Raspberry Pi Board & Accessories
2 Axis Pan Tilt Camera Mount for Camera/Sensors
Product Highlights
- Material: Plastic.
- Provision to add standard servo motors(sold separately)
- Pan and tilt using simple PPM interface using RC servos with position control.
- 180 Degree of freedom on both axis.
SKU: RM000039 -
Interface ICs
FT232R USB UART Driver IC
Product Highlights
- Single chip USB to asynchronous serial data transfer interface.
- Entire USB protocol handled on the chip. No USB specific firmware programming required.
- USB 2.0 Full Compatible..
- Data transfer rates from 300 baud to 3 Mbaud (RS422, RS485, RS232) at TTL levels.
- Integrated +3.3V level converter for USB I/O.
- Configurable I/O pin output drive strength.
SKU: RM000064 -
-
Relay Switch and Electronic Module
I2C RTC DS1307 AT24C32 Real Time Clock Module for Arduino/Robotics
Relay Switch and Electronic ModuleI2C RTC DS1307 AT24C32 Real Time Clock Module for Arduino/Robotics
Product Highlights:
- DS1307 I2C real time clock chip (RTC).
- 24C32 32 K I2C EEPROM memories.
- Using LIR2032 rechargeable lithium battery and charging circuit with.
- DS1307 with battery backup cannot solve the problem of literacy.
SKU: RM000440 -
-
3D Printers and Parts
Dual Motor Driver 1A TB6612FNG For Arduino Microcontroller
Product Highlights:
- Power supply voltage; VM = 15 V(Max).
- Output current; IOUT=1.2 A(ave) / 3.2 A (peak).
- Built-in thermal shutdown circuit and low voltage detecting circuit.
- Thermal Shutdown Circuit.
- Heat Radiation Design.
- Back-EMF protection
SKU: RM000663 -
Electronic Switches Button and Keypads
TTP224 4 Channel Digital Touch Sensor For Arduino
Product Highlights:
- On-board TTP224 capacitive touch 4 key IC
- On-board 4 road level indicator.
- Working voltage: 2 V to 5.5 V DC
- Adjustable output mode, key output mode, longest time and fast/low power output
SKU: RM000876 -
-
Bread Board and Zero PCB
Breadboard Power Supply Module 3.3V/5V Without Breadboard
Product Highlights
- Output voltages could be taken via male burg stick.
- Each voltage level comes with a pair of terminals (Vcc and Gnd).
- Voltage level can be selected with the help of jumper.
- A separate led indicators are used for both 5V and 3.3V.
SKU: RM001296 -
Power Management ICs
LM2907 Frequency to Voltage Converter
Product Highlights
- Frequency to Voltage Converter with High Gain Op-Amp/Comparator
- Ground Referenced Tachometer Input Interfaces Directly with Magnetic Pickups
- Op Amp/Comparator has Floating Transistor Output
- 50mA Sink or Source Current to Operate Relays
- Frequency Doubling for Low Ripple
SKU: RM001929
