Shop
Showing 4345–4368 of 6385 resultsSorted by price: low to high
-
AVR Development & Breakout Board
AVR Multi Controller Programming Board
Product Highlights
- Works under multiple platforms. Linux, Mac OS X and Windows are tested.
- No special controllers or SMD components are needed.
- Program almost all microcontrollers of AVR family.
- Programmer is working on 11.0592 MHz of frequency.
SKU: RM001048 -
-
-
Temperature Humidity Gas Environmental Sensor
Temperature Sensors Module
Product Highlights
- Supports plug and play.
- Be able to control the buzzer sounds or MID music.
- Be able to achieve the control of an interactive sound and light works.
- Pin Definitions: (1) Output (2) VCC (3) GND.
- Power Supply: 5V.
SKU: RM001079 -
Hall Sensor
Hall Effect Sensor With Breakout
Product Highlights
- Switch costs less than a mechanical switch and is much more reliable.
- It can be operated up to 100 kHz.
- It does not suffer from contact bounce because a solid state switch with hysteresis is used rather than a mechanical contact.
- It will not be affected by environmental contaminants since the sensor is in a sealed package.
SKU: RM001186 -
-
Relay Switch and Electronic Module
I2C Module For 16X2 LCD for Arduino/Robotics
Product Highlights:
- Supply voltage: 5V
- The backlight and contrast is adjusted by potentiometer
- Come with 2 IIC interface, which can be connected by Dupont Line or IIC dedicated cable
- Compatible for 1602 LCD
- This is another great IIC/I2C/TWI/SPI Serial Interface
- With this I2C interface module, you will be able to realize data display via only 2 wires.
- If you already has I2C devices in your project, this LCD module actually cost no more resources at all.
- It is fantastic based project
SKU: RM001429 -
-
Operational Amplifier ICs
CA3240 Dual 4.5MHz Bi-MOS Operational Amplifier
Product Highlights
- P-Channel MOSFET in Input Circuit for High Input Impedance
- CMOS Output Stage for Output to Either Supply Rails
- Offset Voltage: 5mV max
- Input Offset Current: 20pA
- Common Mode Rejection Ratio: 90 dB
- Slew Rate: 9 V/?s
- Low Supply Current: 6mA
SKU: RM002037 -
Robot Kits and Parts
Digital Multi Servo Tester ESC RC Consistency CCPM Master Speed Control
Product Highlights:
- Operating Voltage: DC 4.8-6V
- Offer 3 modes to check servos or ESC
- The Manual Mode allows you to turn the knob to different speeds and check the reaction time
- The Neutral mode makes the servo go back to the neutral point
- The Automatic ??Window Wiper?? Mode makes the servo swing like a window wiper in the largest angle possible
SKU: RM002194
