Shop
Showing 3817–3840 of 4155 resultsSorted by price: low to high
-
Raspberry Pi Board & Accessories
2.4 inch TFT LCD for Arduino
Product Highlights
- 2.4" (diagonal) LCD TFT display.
- Bright, 4 white-LED backlight, on by default but you can connect the transistor to a digital pin for backlight control.
- Colorful, 18-bit 262,000 different shades.
- 4-wire resistive touch screen
SKU: RM000671 -
SMPS Power Supply
AC 110/240V DC 12V/3A (36W) Metal Housing Switching Mode Power Supply For Robotics
-5%SMPS Power SupplyAC 110/240V DC 12V/3A (36W) Metal Housing Switching Mode Power Supply For Robotics
Product Highlights
- Input Voltage: AC 100 – 264V 50 / 60Hz
- Output Voltage: 12V DC, 3A
- Output voltage: Adjustment Eange: ?20%
- Protections: Overload / Over Voltage / Short Circuit
- Auto-Recovery After Protection
SKU: RM001292 -
Microcontroller ICs
N76E003AT20 IC-2Pcs.
Product Highlights
The N76E003 provides up to 18 I/O pins under 20 pin package and rich peripherals including two UARTs, SPI, I?C, 6-ch PWM output, wake-up function, and Brown-out detector. The competitive features include a high precision <2% deviation 16 MHz Internal RC oscillator, and a high-resolution 12-bit 8 channel ADC.
SKU: RM018042 -
-
-
-
-
-
-
Buck Converter Step-Down
300W 20A DC-DC Buck Converter Step-down Module Constant Current LED Driver Module
-3%Buck Converter Step-Down300W 20A DC-DC Buck Converter Step-down Module Constant Current LED Driver Module
Product Highlights :
Features of 300W 20A DC-DC Buck Converter Step-down Module Constant Current LED Driver Module :
- Scope: High-power LED constant current driver, rechargeable lithium batteries 4V, 6V, 12V, 14V, 24V battery charging; nickel-cadmium nickel-metal hydride batteries (battery) charging, solar panels, wind generators.
- Output voltage: continuously adjustable (1.25-36V) (applied to the input voltage is higher than the output voltage applications can boost).
- Turn lights Current: current value * (0.1), turn the lamp current, and constant value linkage, such as the constant value of 3A.
- Turn the lamp current is set to a constant current of 0.1 times (0.1 x 3A = 0.3A), when the constant 2A, when adjusted to the current value, then turn the lamp current constant current of 0.1 times (0.1 x 2A = 0.2A).
- This version is a fixed 0.1 times (actually turn the lamp current value is probably not very accurate) is full of instructions for charging.
- Minimum pressure: 1V.
- Output Ripple: about the ripple 50mV (without noise) 20M bandwidth (for reference) Input 24V Output 12V 5A measured.
- Operating temperature: -10 to + 75 (please note the actual use of the power tube temperature, the temperature is too high, please enhance heat dissipation).
SKU: RM001331 -
Arduino Board and Accessories
Arduino Uno R3 atmega328p SMD without USB
Product Highlights
- This is UNO R3 ATmega328P CH340G USB Driver Development Board, and it is an SMD
- It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz quartz crystal, a USB connection, a power jack, an ICSP header and a reset button
- It contains everything needed to support the micro-controller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.
- Microcontroller: SMD (Surface Mount Chip)
- Microcontroller : Atmega328p. USB to UART converter : CH340G
SKU: RM002183 -
Motion Light and Sound Sensor
TCS3200 Color Recognition Sensor Module for MCU Arduino
Product Highlights
- Operating Voltage: 3V-5V
- High-resolution conversion of light intensity to frequency.
- Chip pins all has drawn for standard 100.
- Put the needle (2.54 mm).
- Mil-convenient for bitmap board.
- Programmable color and full-scale output frequency.
- Communicate directly with a microcontroller.
- Low-profile surface mount package.
SKU: RM015815 -
Rechargeable Battery
12V 3000mAh 18650 Li-ion Rechargeable Battery
Product Highlights:
- Nominal voltage: 12v.
- Input voltage: 12.6V.
- Output voltage: 8V to 12.6V.
- Battery capacity:3000mah (3Ah),deviation – 5%.
- Size: 70*56*19MM,deviation – 5mm.
- Packing: Blue PVC.
- With protection circuit: have overcharge, over discharge, over current, short circuit protection functions.
SKU: RM018268 -
-
-

















