Shop
Showing 3769–3792 of 4111 resultsSorted by price: low to high
-
Operational Amplifier ICs
TL974IDR ? Output Rail-to-Rail Very-Low-Noise Operational Amplifier 14-Pin SOIC (Texas Instruments)
-5%
Operational Amplifier ICsTL974IDR ? Output Rail-to-Rail Very-Low-Noise Operational Amplifier 14-Pin SOIC (Texas Instruments)
Product Highlights
- Rail-to-Rail Output Voltage Swing: ?2.4 V at VCC = ?2.5
- Very Low Noise Level: 4 nV/?Hz
- Ultra-Low Distortion: 0.003%
- High Dynamic Features: 12 MHz, 5 V/?s
- Operating Range: 2.7 V to 12 V
- Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
SKU: RM017865 -
-
Raspberry Pi Board & Accessories
2.4 inch TFT LCD for Arduino
Product Highlights
- 2.4" (diagonal) LCD TFT display.
- Bright, 4 white-LED backlight, on by default but you can connect the transistor to a digital pin for backlight control.
- Colorful, 18-bit 262,000 different shades.
- 4-wire resistive touch screen
SKU: RM000671 -
SMPS Power Supply
AC 110/240V DC 12V/3A (36W) Metal Housing Switching Mode Power Supply For Robotics
-5%SMPS Power SupplyAC 110/240V DC 12V/3A (36W) Metal Housing Switching Mode Power Supply For Robotics
Product Highlights
- Input Voltage: AC 100 – 264V 50 / 60Hz
- Output Voltage: 12V DC, 3A
- Output voltage: Adjustment Eange: ?20%
- Protections: Overload / Over Voltage / Short Circuit
- Auto-Recovery After Protection
SKU: RM001292 -
Microcontroller ICs
N76E003AT20 IC-2Pcs.
Product Highlights
The N76E003 provides up to 18 I/O pins under 20 pin package and rich peripherals including two UARTs, SPI, I?C, 6-ch PWM output, wake-up function, and Brown-out detector. The competitive features include a high precision <2% deviation 16 MHz Internal RC oscillator, and a high-resolution 12-bit 8 channel ADC.
SKU: RM018042 -
-
-
-
-
-
-
Buck Converter Step-Down
300W 20A DC-DC Buck Converter Step-down Module Constant Current LED Driver Module
-3%Buck Converter Step-Down300W 20A DC-DC Buck Converter Step-down Module Constant Current LED Driver Module
Product Highlights :
Features of 300W 20A DC-DC Buck Converter Step-down Module Constant Current LED Driver Module :
- Scope: High-power LED constant current driver, rechargeable lithium batteries 4V, 6V, 12V, 14V, 24V battery charging; nickel-cadmium nickel-metal hydride batteries (battery) charging, solar panels, wind generators.
- Output voltage: continuously adjustable (1.25-36V) (applied to the input voltage is higher than the output voltage applications can boost).
- Turn lights Current: current value * (0.1), turn the lamp current, and constant value linkage, such as the constant value of 3A.
- Turn the lamp current is set to a constant current of 0.1 times (0.1 x 3A = 0.3A), when the constant 2A, when adjusted to the current value, then turn the lamp current constant current of 0.1 times (0.1 x 2A = 0.2A).
- This version is a fixed 0.1 times (actually turn the lamp current value is probably not very accurate) is full of instructions for charging.
- Minimum pressure: 1V.
- Output Ripple: about the ripple 50mV (without noise) 20M bandwidth (for reference) Input 24V Output 12V 5A measured.
- Operating temperature: -10 to + 75 (please note the actual use of the power tube temperature, the temperature is too high, please enhance heat dissipation).
SKU: RM001331
