Shop
Showing 3553–3576 of 4155 resultsSorted by price: low to high
-
Sensor ICs
INEMO Inertial Module ? LSM6DSL/LSM6DSLTR/SF 70S
Product Highlights
- Power consumption: 0.4 mA in combo normal mode and 0.65 mA in combo high-performance mode
- ?Always-on? experience with low power consumption for both accelerometer and gyroscope
- Smart FIFO up to 4 kbyte based on features set
- Android M compliant
- ?2/?4/?8/?16 g full scale
- ?125/?250/?500/?1000/?2000 dps full scale
- Analog supply voltage: 1.71 V to 3.6 V
SKU: RM017939 -
Sensor ICs
MPU 6050 QFN-24 3-Axis Gyro/Accelerometer IC
Product Highlights
- User-programmable digital filters for gyroscope, accelerometer, and temp sensor
- Digital-output temperature sensor
- 9-Axis MotionFusion by the on-chip digital motion processor (DMP)
- Auxiliary master I2C bus for reading data from external sensors
- Minimal cross-axis sensitivity between the accelerometer and gyroscope axes
- MEMS structure hermetically sealed and bonded at the wafer level
- 10,000 g shock tolerant
- 400kHz fast mode I2C for communicating with all registers
SKU: RM017941 -
Neodymium Block Magnets
50mm x 22mm x 1.50mm Neodymium Block Magnet
Product Highlights:-
- Shape: Block/Rectangle
- Size (LxBxH): 50mm x 22mm x 1.50mm
- Quantity: 01 Pcs
- Plating /Coating: Ni-Cu-Ni (Nickel)
- Tolerance: +/- 0.1
- Material: Neodymium Magnets (NdFeB)
- Magnetization Direction: through thickness
- Max Operating Temp: 176?F (80?C)
- Ages:7+ ages, both for kids and adults
SKU: RM002825 -
IGBT
IRG4BC30UD IGBT – 600V Ultrafast 8-60 kHz Copack IGBT
Product Highlights
- Ultrafast: Optimized for high operating frequencies 8-40 kHz in hard switching, 200kHz in resonant mod
- Generation 4 IGBT design provides tighter para- meter distribution and higher efficiency than Generation
- IGBT co-packaged with HEXFREDTM ultrafast, ultra- soft-recovery anti-parallel diodes for use in bridge configurations
- Industry standard TO-220AB package
SKU: RM001449 -
-
Buck Converter Step-Down
120W 10-32V to 35V 6A DC-DC Boost Converter Module
Product Highlights :
- The non-isolated step-up power conversion module
- Onboard LED illuminates when the voltage is applied to the module
- Equips Multi-turn Potentiometer.
- The output voltage is continuously adjustable on OUT+ and OUT- screw terminals (Output voltage must be greater than input voltage)
SKU: RM008270 -
Battery Accessories
Digital USB Mobile Power Charging Current Voltage Tester Meter Mini USB Charger Doctor Voltmeter Ammeter
-6%
Battery AccessoriesDigital USB Mobile Power Charging Current Voltage Tester Meter Mini USB Charger Doctor Voltmeter Ammeter
Product Highlights
- High quality, small sized, easy and convenient to carry.
- It can measure current and voltage of the power supply equipment with USB port.
- The voltage and current will be displayed circularly.
- Plug and Play, no extra power supply needed.
SKU: RM000035 -
-
Motion Light and Sound Sensor
ISD1820 Voice Recording Module With Microphones
Product Highlights
- Power Input: DC 2.4-5.5V .
- With internal audio amplifier, this board can drive 8 Ohm 0.5W speaker directly.
- Microphone is on board.
- Board dimension: 54mm x 38mm.
- All the pins of ISD1820 are extended out with an connector, which can powered and controlled by microprocessor directly.
SKU: RM000110 -
-
-
Temperature Humidity Gas Environmental Sensor
DS18B20 18B20 Temperature Sensor Module for arduino
-6%
Temperature Humidity Gas Environmental SensorDS18B20 18B20 Temperature Sensor Module for arduino
Product Highlights
- Digital signal output
- 18B20 Temperature Sensor Chip
- Resolution adjustment ranges from 9-12 bytes.
- Send data via a pin
- Temperature measurement ranges: -55?C to +125?C, be accurate to 0.5?C.
SKU: RM000749
