ATMEGA128A-AU 1435 8-bit Microcontroller

SKU: RM002697

Availability:

In stock


Product Highlights:

  • Pin count 64
  • Flash (KB) 128
  • SRAM (KB) 4
  • EEPROM (KB) 4
  • External Memory (KB) 64
  • General Purpose I/O pins 53
  • SPI 1
  • TWI (I2C) 1
  • USART 2
  • 8-bit Timer/Counters 2
  • 16-bit Timer/Counters 2

412.00 (Incl. GST)

In stock

The ATMEGA128A is a low-power CMOS 8-bit microcontroller based on the AVR? enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATMEGA128A achieves through puts close to 1MIPS per MHz .This empowers system designer to optimize the device for power consumption versus processing speed. 

Features:-

? High-performance, Low-power Atmel AVR 8-bit Microcontroller 

? Advanced RISC Architecture 

    - 133 Powerful Instructions 

    – Most Single-clock Cycle Execution 

    -  32 ? 8 General Purpose Working Registers + Peripheral Control Registers 

    -  Fully Static Operation 

    -  Up to 16MIPS Throughput at 16MHz 

? High Endurance Non-volatile Memory segments 

    – 128Kbytes of In-System Self-programmable Flash program memory 

    – 4Kbytes EEPROM 

    – 4Kbytes Internal SRAM

    -  Write/Erase cycles: 10,000 Flash/100,000 EEPROM 

    -  Data retention: 20 years at 85?C/100 years at 25?C(1) 

    - Optional Boot Code Section with Independent Lock Bits 

          ? In-System Programming by On-chip Boot Program 

          ? True Read-While-Write Operation 

    -  Up to 64 Kbytes Optional External Memory Space 

    -  Programming Lock for Software Security

    -  SPI Interface for In-System Programming 

? JTAG (IEEE std. 1149.1 Compliant) Interface

     - Boundary-scan Capabilities According to the JTAG Standard 

     - Extensive On-chip Debug Support Atmel-8151

     - Programming of Flash, EEPROM, Fuses and Lock Bits through the JTAG Interface

? Atmel QTouch? library support 

     ? Capacitive touch buttons, sliders and wheels 

     ? Atmel Q-Touch and Q-Matrix acquisition 

     ? Up to 64 sense channels 

? Peripheral Features 

     ? Two 8-bit Timer/Counters with Separate Prescalers and Compare Modes 

    ? Two Expanded 16-bit Timer/Counters with Separate Prescaler, Compare Mode and Capture Mode 

    ? Real Time Counter with Separate Oscillator 

    ? Two 8-bit PWM Channels 

    ? 6 PWM Channels with Programmable Resolution from 2 to 16 Bits

    ? Output Compare Modulator 

    ? 8-channel, 10-bit ADC 

       ? 8 Single-ended Channels 

       ? 7 Differential Channels 

       ? 2 Differential Channels with Programmable Gain at 1x, 10x, or 200x 

   ? Byte-oriented Two-wire Serial Interface

   ? Dual Programmable Serial USARTs 

   ? Master/Slave SPI Serial Interface 

   ? Programmable Watchdog Timer with On-chip Oscillator 

   ? On-chip Analog Comparator 

? Special Microcontroller Features 

   ? Power-on Reset and Programmable Brown-out Detection 

   ? Internal Calibrated RC Oscillator 

   ? External and Internal Interrupt Sources 

   ? Six Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, Standby, and Extended Standby ‘

   ? Software Selectable Clock Frequency 

   ? ATmega103 Compatibility Mode Selected by a Fuse 

   ? Global Pull-up Disable 

? I/O and Packages 

   ? 53 Programmable I/O Lines 

   ? 64-lead TQFP and 64-pad QFN/MLF 

? Operating Voltages 

   ? 2.7 – 5.5V 

? Speed Grades

   ? 0 – 16MHz

    - On-chip 2-cycle Multiplier

SKU: RM002697 Category:
Warehouse Code: R00019-S07-P01-Z01
Weight 999 g