Sensors
Showing 73–96 of 114 resultsSorted by price: low to high
-
Biometric Rotation and Current
Infrared Eye Blink Sensor with Goggles
Product Highlights
- EYE BLINK indication by LED
- Instant output digital signal for directly Connecting to the microcontroller
- Working Voltage +5V DC
- TTL output 5V or 0V
- use for digital Eye Blink monitor
- use for Vehicle Accident prevention.
SKU: RM003541 -
Motion Light and Sound Sensor
ISD1820 Voice Recording Module With Microphones
Product Highlights
- Power Input: DC 2.4-5.5V .
- With internal audio amplifier, this board can drive 8 Ohm 0.5W speaker directly.
- Microphone is on board.
- Board dimension: 54mm x 38mm.
- All the pins of ISD1820 are extended out with an connector, which can powered and controlled by microprocessor directly.
SKU: RM000110 -
Temperature Humidity Gas Environmental Sensor
DS18B20 18B20 Temperature Sensor Module for arduino
-3%
Temperature Humidity Gas Environmental SensorDS18B20 18B20 Temperature Sensor Module for arduino
Product Highlights
- Digital signal output
- 18B20 Temperature Sensor Chip
- Resolution adjustment ranges from 9-12 bytes.
- Send data via a pin
- Temperature measurement ranges: -55?C to +125?C, be accurate to 0.5?C.
SKU: RM000749 -
Load Pressure Flow and Vibration Sensor
YF-S201 Water Flow Measurement Sensor with 1-30Liter/min Flow Rate
-3%Load Pressure Flow and Vibration SensorYF-S201 Water Flow Measurement Sensor with 1-30Liter/min Flow Rate
Product Highlights
- Working Voltage: 5 to 18V DC (min tested working voltage 4.5V).
- Max current draw: 15mA @ 5V.
- Working Flow Rate: 1 to 30 Liters/Minute.
- Maximum water pressure: 2.0 MPa.
- Flow rate pulse characteristics: Frequency (Hz) = 7.5 * Flow rate (L/min).
SKU: RM013410 -
Motion Light and Sound Sensor
8RC Line Following Reflectance IR Sensor Array
Product Highlights:
- Operating voltage: 3.3 to 5V
- Current supply: 100mA
- Output voltage range: 0V to supplied voltage
- Output format: 8 digital I/O compatible signal
- Sensing distance: 3mm
- Maximum sensing distance: 9.5mm
SKU: RM018135 -
IMU Accelerometer Magnetometer and Gyroscope
MC-38 Wired Door Window Sensor Magnetic Switch Home Alarm System
-3%IMU Accelerometer Magnetometer and GyroscopeMC-38 Wired Door Window Sensor Magnetic Switch Home Alarm System
Product Highlights
- Actuation Distance: 15 ? 25 mm;
- Connecting cable length: 30 cm.
- Connection Type: Normally Open
- Magnetic sensor alarm, control the switch of the circuit via the built-in magnet
- Alarm when someone intrudes into your places
- Can be used in places like apartments, hotels, offices, wardrobe etc.
SKU: RM007223 -
IMU Accelerometer Magnetometer and Gyroscope
GY-521 MPU6050 Module 3 Axis Analog Gyro Sensors + 3 Axis Accelerometer Module
-3%IMU Accelerometer Magnetometer and GyroscopeGY-521 MPU6050 Module 3 Axis Analog Gyro Sensors + 3 Axis Accelerometer Module
Product Highlights
- Use the chip: MPU-6050.
- Power supply :3-5v (internal low dropout regulator).
- Communication modes: standard IIC communications protocol.
- Chip built-in 16bit AD converter, 16-bit data output.
SKU: RM000596 -
-
Motion Light and Sound Sensor
DS1307 RTC Module for Arduino
Product Highlights
- I2C Serial Interface.
- Programmable Square-Wave Output Signal.
- Automatic Power-Fail Detect and Switch Circuitry.
- Consumes Less than 500nA in Battery-Backup Mode with Oscillator Running.
- Optional Industrial Temperature Range: -40?C to +85?C.
SKU: RM001042 -
Motion Light and Sound Sensor
TCS3200 Color Recognition Sensor Module for MCU Arduino
Product Highlights
- Operating Voltage: 3V-5V
- High-resolution conversion of light intensity to frequency.
- Chip pins all has drawn for standard 100.
- Put the needle (2.54 mm).
- Mil-convenient for bitmap board.
- Programmable color and full-scale output frequency.
- Communicate directly with a microcontroller.
- Low-profile surface mount package.
SKU: RM015815 -
