Buck Converter Step-Down

Product Highlight:

• Input: DC 4.5V ? 12V (input voltage must be more than output voltage (more than 1V))
• Output: 3.3V, 800mA (load current cannot exceed 800ma)
• Onboard AMS1117 chip.
• Onboard power indicator to indicate power is turned on: Red LED.
• Small Compact Size, 4Pin Type, Breadboard Friendly.
• Dual-panel design, the layout is nice

Product Highlights:

• Input Voltage (V) : 6 to 12
• Connector : 5.5mm Power Jack
• Output Voltage : 3.3V and 5V
• Error Voltage(V : 0.05)

Product Highlight:

• Module: Non-isolated step-down module (BUCK)
• Input voltage: DC 4.75V-23V
• Rectification: Synchronous rectification
• Built-in 160?C thermal shutdown
• Output ripple: 30mV (no-load)

Product Highlights.

1. High-Quality Silicone Wires at Input and Output
2. Creates an Arc of 400KV
3. Small in Size
4. Easy to Use

Product Highlights

• Model / Name: LM2596S DC-DC step-down module.
• Input voltage: 3.2V to 40V.
• Output voltage: 1.25V to 35V.
• Output current: 3A (max).

Product Highlights

• I/p Voltage range:19-36vdc
• Nominal voltage:24Vdc
• O/p voltage:15V
• O/p current:500(mA)
• wattage:0.5W
• Isolation: No
• Package: SIP

Product Highlight:

• Input Voltage: 220V AC.
• Maximum Power: 2000W.
• Adjustable Voltage: 0-220V AC.
• AC frequency: 50-60Hz.
• Size(LxWxH): Approx. 85 x 55 x 38 mm.

Product Highlight:

• Input Voltage: 220V AC.
• Maximum Power: 4000W.
• Adjustable Voltage: 0-220V AC.
• AC frequency: 50-60Hz.

Product Highlights:

• Input Supply voltage (V) : 7 ~ 40
• Output voltage (V) : Continuously adjustable (1.25 ~ 35)
• Output Current (A) : 8A (10A maximum)
• Conversion efficiency: : 95%
• Operating frequency (KHz) : 300
• No-load current : Typical 20mA
• Load regulation : 1%

Product Highlights :

Features of 300W 20A DC-DC Buck Converter Step-down Module Constant Current LED Driver Module :

• Scope: High-power LED constant current driver, rechargeable lithium batteries 4V, 6V, 12V, 14V, 24V battery charging; nickel-cadmium nickel-metal hydride batteries (battery) charging, solar panels, wind generators.
• Output voltage: continuously adjustable (1.25-36V) (applied to the input voltage is higher than the output voltage applications can boost).
• Turn lights Current: current value * (0.1), turn the lamp current, and constant value linkage, such as the constant value of 3A.
• Turn the lamp current is set to a constant current of 0.1 times (0.1 x 3A = 0.3A), when the constant 2A, when adjusted to the current value, then turn the lamp current constant current of 0.1 times (0.1 x 2A = 0.2A).
• This version is a fixed 0.1 times (actually turn the lamp current value is probably not very accurate) is full of instructions for charging.
• Minimum pressure: 1V.
• Output Ripple: about the ripple 50mV (without noise) 20M bandwidth (for reference) Input 24V Output 12V 5A measured.
• Operating temperature: -10 to + 75 (please note the actual use of the power tube temperature, the temperature is too high, please enhance heat dissipation).

Product Highlights :

1. High efficiency and low ripple.
2. Maximum output 6A to 9A.
3. Dual-side plate design.
4. Easy to use handy Module.

Product Highlight:

• Input: 3.5-28V.
• Output: 1.25V-26V.
• Output Voltage Independent of input voltage (3.5V-28V input, any value output 1.25V-26V).
• Maximum Input Current: 3A.
• Maximum Output: 3A.
• Rated Input: 1A, Output: 1A.
• Size: 5.2cm x 3.8cm x 2cm

Product Highlights :

• Input voltage:10V ~ 40V
• Input current: 0~8A
• Output voltage: 0 ~ 38V
• Output current: 0 ~ 6A
• Voltage regulation/display resolution: 0.01 V
• Current regulation/display resolution: 0.001A
• The minimum display resolution of power: 0.001 W
• The minimum display resolution of capacity: 0.001AH
• Conversion efficiency: up to 80%
• The output ripple: 50 mV
• Working temperature: 40~ + 85
• Working frequency:150 KHz