Electronic Module
Showing 217–240 of 394 resultsSorted by price: low to high
-
Boost Converter Step-Up
LM2577 3A DC-DC Step UP LED Voltmeter 3-34V to 4-35V Adjustable Boost Converter module
Boost Converter Step-UpLM2577 3A DC-DC Step UP LED Voltmeter 3-34V to 4-35V Adjustable Boost Converter module
Product Highlights :
- Input Voltage (V) :3 to 34
- Output Voltage(V) :4 ~ 35
- Max. Output Current :(A) 3
- Voltmeter Range (V) :0 to 40
- Switching Frequency(KHz) :52
- Operating Temperature(?C) : -40 to 90
- Length (mm) :60
- Width (mm) :35
- Height (mm) :13.5
- Weight (gm) :24
SKU: RM013064 -
Boost Converter Step-Up
DC-DC 250W 4-40V Adjustable Step Up Boost Converter Constant Current Vehicle LED Driver 10A Max Input with Wire
Boost Converter Step-UpDC-DC 250W 4-40V Adjustable Step Up Boost Converter Constant Current Vehicle LED Driver 10A Max Input with Wire
Product Highlights:
- Module Type: Boost Step-Up DC-DC Converter
- Power Rating: 250W
- Current Capacity: 10A Constant Current
- Input Voltage Range: 3-35V
- Output Voltage Range 4-40V (Continuously Adjustable, Default: 19V)
SKU: RM008602 -
-
Relay Switch and Electronic Module
SPI to Ethernet Hardware TCP/IP W5500 Ethernet Network Module
Product Highlights:
- 10BaseT/100BaseTX Ethernet PHY embedded.
- Supports automatic response (full duplex/half duplex mode).
- Supports 8 independent sockets simultaneously.
- Internal 32Kbytes Memory for Tx/Rx Buffers.
- Power off mode: support.
- Network wake: support.
- SPI interface (SPI MODE 0, 3), convenient connection with MCU.
SKU: RM006663 -
SMPS Power Supply
5V 3A SMPS – 15W – DC Metal Power Supply – Good Quality – Non Water Proof
Product Highlights:
- Input Voltage: AC 100 – 264V 50 / 60Hz
- Output Voltage: 5V DC, 3A
- Output voltage: Adjustment Range: ?20%
- Protections: Overload / Over Voltage / Short Circuit
- Auto-Recovery After Protection
- Universal AC input / Full range
- 100% Full Load Burn-in Test
- Cooling by Free Air Convection
SKU: RM010981 -
Relay Switch and Electronic Module
ENC28J60 LAN Ethernet Network Board Module
Product Highlights
- IEEE 802.3 compatible Ethernet controller.
- Integrated MAC and 10BASE-T PHY.
- Receiver and collision squelch circuit.
- Supports one 10BASE-T port with automatic.
- polarity detection and correction.
SKU: RM000952 -
Buck Converter Step-Down
48V 36V 24V to 19V 12V 9V 5V 3V Adjustable Synchronous Step Down Module – Car Charging Power Supply
Buck Converter Step-Down48V 36V 24V to 19V 12V 9V 5V 3V Adjustable Synchronous Step Down Module – Car Charging Power Supply
Product Highlights :
- High Precision adjustable potentiometer.
- Clockwise for higher voltage, Counterclockwise for lower voltage.
- Effectively filter out high-frequency noise.
SKU: RM006311 -
Transformers
6-0-6 6V 2A Center Tapped Step Down Transformer
Product Highlights:
- Input Voltage: 230V AC
- Output Voltage: 6V, 6V or 0V
- Output Current: 2 Amp
- Mounting: Vertical mount type
SKU: RM009400 -
Relay Switch and Electronic Module
Waterproof Ultrasonic Obstacle Sensor Reversing Radar Sensor with Separate Probe
Relay Switch and Electronic ModuleWaterproof Ultrasonic Obstacle Sensor Reversing Radar Sensor with Separate Probe
Product Highlights:
- Integrated with wire enclosed waterproof probe, suitable for wet, harsh measurement occasions
- Small size, easy to use
- Operating Voltage: 5 V
- Sonar Sensing Range: 25-450 cm
- Max. Sensing Range: 450 cm
- Frequency: 40 KHz
SKU: RM018097 -
Buck Converter Step-Down
5V DD38LOSA DC-DC Converter 5W Power Supply Module
Product Highlights :
- VIN Input Voltage Range 8 to 40V
- IO Maximum Output Current 700mA
- IPEAK Peak Surge Current 1000mA
- VO Output Voltage 5V
- IO Max Output Current (Continuous) 700mA
- Iq Quiescent current 5mA typical
- Dimensions L x W x H (not including header) 25 x 16 x 5.8mm
SKU: RM004376 -
-
Buck Converter Step-Down
5000W AC 220V High-Power Electronic Regulator SCR Voltage Regulator Module
Product Highlights :
- High-temperature FR-4 PCB
- 100% High quality and Brand new
- Control the speed of a Brushed AC motor with this controller
- High efficiency, high torque, low heat generating
- Aluminium sheet cooling, rapid cooling
- With reverse polarity protection, high current protection
- High-temperature resistant FR 4 circuit board.
SKU: RM010549 -
Transformers
15-0-15 15V 2A Center Tapped Step Down Transformer
Product Highlights:
- Input Voltage: 230V AC
- Output Voltage: 15V, 15V or 0V
- Output Current: 2Amp
- Mounting: Vertical mount type
SKU: RM015118 -
Transformers
9-0-9 9V 2A Center Tapped Step Down Transformer
Product Highlights:
- Input Voltage: 230V AC
- Output Voltage: 9V, 9V or 0V
- Output Current: 2 Amp
- Mounting: Vertical mount type
SKU: RM004063 -
Buck Converter Step-Down
DC-DC High Power Adjustable Step-up Module 3.0-35V to 3.5-35V 100W with Digital Display Voltmeter
Buck Converter Step-DownDC-DC High Power Adjustable Step-up Module 3.0-35V to 3.5-35V 100W with Digital Display Voltmeter
Product Highlights :
- High power 100W.
- Switch display output and input voltage.
- Adjustable output voltage.
- Real-time display voltage.
- Comes with an excellent heat sink
- Fixed mounting hole.
- High-quality terminal block
SKU: RM009459 -
Buck Converter Step-Down
300W 20A DC-DC Buck Converter Step-down Module Constant Current LED Driver Module
Buck Converter Step-Down300W 20A DC-DC Buck Converter Step-down Module Constant Current LED Driver Module
Product Highlights :
Features of 300W 20A DC-DC Buck Converter Step-down Module Constant Current LED Driver Module :
- Scope: High-power LED constant current driver, rechargeable lithium batteries 4V, 6V, 12V, 14V, 24V battery charging; nickel-cadmium nickel-metal hydride batteries (battery) charging, solar panels, wind generators.
- Output voltage: continuously adjustable (1.25-36V) (applied to the input voltage is higher than the output voltage applications can boost).
- Turn lights Current: current value * (0.1), turn the lamp current, and constant value linkage, such as the constant value of 3A.
- Turn the lamp current is set to a constant current of 0.1 times (0.1 x 3A = 0.3A), when the constant 2A, when adjusted to the current value, then turn the lamp current constant current of 0.1 times (0.1 x 2A = 0.2A).
- This version is a fixed 0.1 times (actually turn the lamp current value is probably not very accurate) is full of instructions for charging.
- Minimum pressure: 1V.
- Output Ripple: about the ripple 50mV (without noise) 20M bandwidth (for reference) Input 24V Output 12V 5A measured.
- Operating temperature: -10 to + 75 (please note the actual use of the power tube temperature, the temperature is too high, please enhance heat dissipation).
SKU: RM001331 -
Transformers
15-0-15 15V 3A Center Tapped Step Down Transformer
Product Highlights:
- Input Voltage: 230V AC
- Output Voltage: 15V, 15V or 0V
- Output Current: 3Amp
- Mounting: Vertical mount type
SKU: RM004078
