Electronic Components
Showing 4177–4200 of 4708 resultsSorted by price: low to high
-
-
Microcontroller ICs
ATmega8L PDIP-28 Microcontroller
Product Highlights:
- Advanced RISC Architecture.
- Up to 16 MIPS Throughput at 16 MHz.
- On-chip 2-cycle Multiplier.
- Write/Erase Cycles: 10,000 Flash/100,000 EEPROM.
- Programming Lock for Software Security.
- Programmable Serial USART.
- Applications of ATmega8 Microcontroller:
- Useful for Multiple DIY projects.
SKU: RM018150 -
MOSFETs
IRFP254N MOSFET – 250V 23A N-Channel Power MOSFET TO-247 Package
Product Highlights:
- Number of Channels 1 Channel
- Transistor Polarity N-Channel
- Drain-Source Breakdown Voltage (Vds) 250V
- Continuous Drain Current (Id) 23A
- Drain-Source Resistance (Rds On) 125mOhms
- Gate-Source Voltage (Vgs) 20V
- Gate Charge (Qg) 100 nC
- Operating Temperature Range -55 – 175?C
- Power Dissipation (Pd) 220W
SKU: RM008914 -
-
Neodymium Block Magnets
30mm x 5mm (30×5 mm) Neodymium Disc Strong Magnet
Product Highlights:-
- Shape: Disc/Circular
- Dimensions: 30mm diameter x 5mm thickness
- Quantity: 01 Pcs
- Plating /Coating: Ni-Cu-Ni (Nickel)
- Tolerance: +/- 0.1
- Material: Neodymium Magnets (NdFeB)
- Magnetization Direction: Diameter
- Max Operating Temp: 176?F (80?C)
- Ages:7+ ages, both for kids and adults
SKU: RM005496 -
Interface ICs
FT232R USB UART Driver IC
Product Highlights
- Single chip USB to asynchronous serial data transfer interface.
- Entire USB protocol handled on the chip. No USB specific firmware programming required.
- USB 2.0 Full Compatible..
- Data transfer rates from 300 baud to 3 Mbaud (RS422, RS485, RS232) at TTL levels.
- Integrated +3.3V level converter for USB I/O.
- Configurable I/O pin output drive strength.
SKU: RM000064 -
-
-
Bread Board and Zero PCB
Breadboard Power Supply Module 3.3V/5V Without Breadboard
Product Highlights
- Output voltages could be taken via male burg stick.
- Each voltage level comes with a pair of terminals (Vcc and Gnd).
- Voltage level can be selected with the help of jumper.
- A separate led indicators are used for both 5V and 3.3V.
SKU: RM001296 -
Power Management ICs
LM2907 Frequency to Voltage Converter
Product Highlights
- Frequency to Voltage Converter with High Gain Op-Amp/Comparator
- Ground Referenced Tachometer Input Interfaces Directly with Magnetic Pickups
- Op Amp/Comparator has Floating Transistor Output
- 50mA Sink or Source Current to Operate Relays
- Frequency Doubling for Low Ripple
SKU: RM001929