Development Board
Showing 97–120 of 140 resultsSorted by price: low to high
-
-
Arduino Board and Accessories
Uno R3 CH340G ATmega328p Development Board Arduino DIP
Product Highlights:
- Microcontroller ATmega328 (DIP) Arduino compatible? Interface CH340
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 5-20V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: RM005553 -
Wireless Controller Board and Module
LoRa module RFM95W-915S2R
Product Highlights:
- High sensitivity: down to -144 dBm.
- Bullet-proof front end: IIP3 = -12.5 dBm.
- +20 dBm ? 100 mW constant
- RF output: 3.3Vsupply .
- Low RX current: 10.3 mA
- Programmable bit rate: 300 kbps.
- register retention: 200 nA
- resolution: 61 Hz.
- Dynamic Range RSSI: 127 dB
SKU: RM013080 -
-
Wireless Controller Board and Module
Smart Home AC 220V 433MHz 2 Channel Wireless Relay RF Remote Control Switch Heterodyne Receiver and 433mhz transmitter
-2%
Wireless Controller Board and ModuleSmart Home AC 220V 433MHz 2 Channel Wireless Relay RF Remote Control Switch Heterodyne Receiver and 433mhz transmitter
Product Highlights:
- Frequency-433MHz
- Channels-2
- Code-Learning code
- Model-Momentary/Toggle/Latching
- Voltage-AC 85-250V
- Distance-50-100m
- Include-1pcs receiver + 1pcs transmitter
SKU: RM018080 -
Raspberry Pi Board & Accessories
EDUP Wireless NANO USB Adapter for Raspberry Pi
Product Highlights
- Compact, mini design
- Complies with IEEE 802.11n (Draft 2.0), IEEE 802.11g, IEEE 802.11b standards
- USB 2.0 interface
- Data Rate: Transmitting: up to 150 Mbps, Receiving: 150 Mbps
SKU: RM001335 -
-
Wireless Controller Board and Module
WIFI module ESP8266 with ceramic antenna
Product Highlights
- 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLLs, regulators, DCXO and power management units
- +19.5dBm output power in 802.11b mode
SKU: RM000538 -
Arduino Board and Accessories
Arduino Mega ATmega2560-16AU CH340G Development Board
Product Highlights
- 54 digital input / output terminals (14 of which have programmable PWM outputs).
- 16 analog inputs.
- 4 UARTs (hardware serial ports).
- 16 MHz crystal clock.
- Operating voltage: 6 ~ 12v.
- Dimensions: 110 x 53 x 15 mm.
SKU: RM008654 -
-
AVR Development & Breakout Board
ADS1015 12-Bit ADC – 4 Channel with Programmable Gain Amplifier
Product Highlights
- WIDE SUPPLY RANGE: 2.0V to 5.5V
- LOW CURRENT CONSUMPTION: Continuous Mode: Only 150?A Single-Shot Mode: Auto Shut-Down
- PROGRAMMABLE DATA RATE: 128SPS to 3.3kSPS
- INTERNAL LOW-DRIFT VOLTAGE REFERENCE
- INTERNAL OSCILLATOR
SKU: RM003131 -
Raspberry Pi Board & Accessories
Raspberry Pi Camera Module V2 – 8 Megapixels
Product Highlights
- Fixed focus lens on-board
- Improved resolution ? 8-Megapixel native resolution sensor-capable of 3280 x 2464 pixel static images
- Supports 1080p30, 720p60 and 640x480p90 video
- Size 25mm x 23mm x 9mm
- Weight just over 3g
- Connects to the Raspberry Pi board via a short ribbon cable (supplied)
- Camera v2 is supported in the latest version of Raspbian, Raspberry Pi?s preferred operating system
- Uses the Sony IMX219PQ image sensor ? high-speed video imaging and high sensitivity
SKU: RM003532 -
Arduino Board and Accessories
Arduino Lily Pad USB ATmega32u4
Product Highlight:
- Microcontroller ATmega32u4
- Input Voltage (recommended) 3.3V
- Input Voltage (limit) 3.8V
- Digital I/O Pins 5
- PWM Digital I/O Pins 9
- Analog Input Pins 4
- DC Current per I/O Pin 40 mA
- Flash Memory 32 KB
- Flash Memory for Bootloader 4 KB
- SRAM 2.5 KB
- EEPROM 1 KB (ATmega32u4)
- Clock Speed 8 MHz
SKU: RM002242 -
-
Wireless Controller Board and Module
GSM GPRS SIM900A module with Stub Antenna and SMA connector
Product Highlights
- Dual-Band GSM/GPRS 900/ 1800 MHz.
- RS232interface for direct communication with computer or MCU kit.
- Configurable baud rate.
- Stub Antenna and SMA Connector.
- SIM Card holder.
SKU: RM001299
