Electro Best Selling:
Save Big on Warehouse Cleaning
Go to Daily Deals Section
AVR Development & Breakout Board
Atmega8 mini Robotics Development Board V4.0
Product Highlights
8Kbytes of In-System Self-programmable Flash program memory.
512Bytes EEPROM.
1Kbyte Internal SRAM.
5.0V – 24V.
Power Consumption at 4Mhz, 3V, 25?C.
Active: 3.6mA.
Idle Mode: 1.0mA.
Power-down Mode: 0.5?A
SKU: RM000006
AVR Development & Breakout Board
AVR USB Programmer (USBASP)
Product Highlights
Works under multiple platforms. Linux, Mac OS X and Windows are tested.
No special controllers or smd components are needed.
Programming speed is up to 5kBytes/sec.
Planned: serial interface to target (e.g. for debugging).
Compatible with Windows XP, Windows Vista and Windows 7. Both 32bit and 64bit versions are supported.
SKU: RM000008
Relay Switch and Electronic Module
USB to TTL(Rx, Tx) Converter
Product Highlights
Fully compliant with USB Specification v1.1 and USB CDC v1.1.
Supports automatic handshake mode.
Supports Remote wake-up and power management .
256-bytes buffer each for upstream and downstream data flow .
Supports default ROM or external EEPROM for device configuration .
On-chip USB transceiver .
On-chip crystal oscillator running at 12MHz .
SKU: RM000010
Motion Light and Sound Sensor
Light Searching Sensor
Product Highlights
Sleek Design
Designed for Robosapiens Development Boards.
Can be interfaced with other Development Boards Like Arduino, Arm 7, Arm 9, Arm 11 etc. by using pin connectors.
Presence of sunlight can be detected using the Sensor.
SKU: RM000012
Motion Light and Sound Sensor
Sound Sensor
Product Highlights
Detection range up to 3 meters away.
Adjustable range of detection.
Single bit active – high output.
Built – in series resistor for compatibility with the microcontroller and other 3.3 V devices.
3 – pin SIP header make it ready to use for breadboard or Robomart?s Development Boards.
SKU: RM000018
Battery Accessories
Digital USB Mobile Power Charging Current Voltage Tester Meter Mini USB Charger Doctor Voltmeter Ammeter
-3%
Battery Accessories
Digital USB Mobile Power Charging Current Voltage Tester Meter Mini USB Charger Doctor Voltmeter Ammeter
Product Highlights
High quality, small sized, easy and convenient to carry.
It can measure current and voltage of the power supply equipment with USB port.
The voltage and current will be displayed circularly.
Plug and Play, no extra power supply needed.
SKU: RM000035
AVR Development & Breakout Board
Atmega8 mini Robotics Development Board V4.0
Product Highlights
8Kbytes of In-System Self-programmable Flash program memory.
512Bytes EEPROM.
1Kbyte Internal SRAM.
5.0V – 24V.
Power Consumption at 4Mhz, 3V, 25?C.
Active: 3.6mA.
Idle Mode: 1.0mA.
Power-down Mode: 0.5?A
SKU: RM000006
AVR Development & Breakout Board
AVR USB Programmer (USBASP)
Product Highlights
Works under multiple platforms. Linux, Mac OS X and Windows are tested.
No special controllers or smd components are needed.
Programming speed is up to 5kBytes/sec.
Planned: serial interface to target (e.g. for debugging).
Compatible with Windows XP, Windows Vista and Windows 7. Both 32bit and 64bit versions are supported.
SKU: RM000008
Relay Switch and Electronic Module
USB to TTL(Rx, Tx) Converter
Product Highlights
Fully compliant with USB Specification v1.1 and USB CDC v1.1.
Supports automatic handshake mode.
Supports Remote wake-up and power management .
256-bytes buffer each for upstream and downstream data flow .
Supports default ROM or external EEPROM for device configuration .
On-chip USB transceiver .
On-chip crystal oscillator running at 12MHz .
SKU: RM000010
Motion Light and Sound Sensor
Light Searching Sensor
Product Highlights
Sleek Design
Designed for Robosapiens Development Boards.
Can be interfaced with other Development Boards Like Arduino, Arm 7, Arm 9, Arm 11 etc. by using pin connectors.
Presence of sunlight can be detected using the Sensor.
SKU: RM000012
Motion Light and Sound Sensor
Sound Sensor
Product Highlights
Detection range up to 3 meters away.
Adjustable range of detection.
Single bit active – high output.
Built – in series resistor for compatibility with the microcontroller and other 3.3 V devices.
3 – pin SIP header make it ready to use for breadboard or Robomart?s Development Boards.
SKU: RM000018
Battery Accessories
Digital USB Mobile Power Charging Current Voltage Tester Meter Mini USB Charger Doctor Voltmeter Ammeter
-3%
Battery Accessories
Digital USB Mobile Power Charging Current Voltage Tester Meter Mini USB Charger Doctor Voltmeter Ammeter
Product Highlights
High quality, small sized, easy and convenient to carry.
It can measure current and voltage of the power supply equipment with USB port.
The voltage and current will be displayed circularly.
Plug and Play, no extra power supply needed.
SKU: RM000035
Motion Light and Sound Sensor
Sound Sensor
Product Highlights
Detection range up to 3 meters away.
Adjustable range of detection.
Single bit active – high output.
Built – in series resistor for compatibility with the microcontroller and other 3.3 V devices.
3 – pin SIP header make it ready to use for breadboard or Robomart?s Development Boards.
SKU: RM000018
Battery Accessories
Digital USB Mobile Power Charging Current Voltage Tester Meter Mini USB Charger Doctor Voltmeter Ammeter
-3%
Battery Accessories
Digital USB Mobile Power Charging Current Voltage Tester Meter Mini USB Charger Doctor Voltmeter Ammeter
Product Highlights
High quality, small sized, easy and convenient to carry.
It can measure current and voltage of the power supply equipment with USB port.
The voltage and current will be displayed circularly.
Plug and Play, no extra power supply needed.
SKU: RM000035
Motion Light and Sound Sensor
Light Searching Sensor
Product Highlights
Sleek Design
Designed for Robosapiens Development Boards.
Can be interfaced with other Development Boards Like Arduino, Arm 7, Arm 9, Arm 11 etc. by using pin connectors.
Presence of sunlight can be detected using the Sensor.
SKU: RM000012
Relay Switch and Electronic Module
USB to TTL(Rx, Tx) Converter
Product Highlights
Fully compliant with USB Specification v1.1 and USB CDC v1.1.
Supports automatic handshake mode.
Supports Remote wake-up and power management .
256-bytes buffer each for upstream and downstream data flow .
Supports default ROM or external EEPROM for device configuration .
On-chip USB transceiver .
On-chip crystal oscillator running at 12MHz .
SKU: RM000010
AVR Development & Breakout Board
AVR USB Programmer (USBASP)
Product Highlights
Works under multiple platforms. Linux, Mac OS X and Windows are tested.
No special controllers or smd components are needed.
Programming speed is up to 5kBytes/sec.
Planned: serial interface to target (e.g. for debugging).
Compatible with Windows XP, Windows Vista and Windows 7. Both 32bit and 64bit versions are supported.
SKU: RM000008
AVR Development & Breakout Board
Atmega8 mini Robotics Development Board V4.0
Product Highlights
8Kbytes of In-System Self-programmable Flash program memory.
512Bytes EEPROM.
1Kbyte Internal SRAM.
5.0V – 24V.
Power Consumption at 4Mhz, 3V, 25?C.
Active: 3.6mA.
Idle Mode: 1.0mA.
Power-down Mode: 0.5?A
SKU: RM000006
AVR Development & Breakout Board
Atmega8 mini Robotics Development Board V4.0
Product Highlights
8Kbytes of In-System Self-programmable Flash program memory.
512Bytes EEPROM.
1Kbyte Internal SRAM.
5.0V – 24V.
Power Consumption at 4Mhz, 3V, 25?C.
Active: 3.6mA.
Idle Mode: 1.0mA.
Power-down Mode: 0.5?A
SKU: RM000006
AVR Development & Breakout Board
AVR USB Programmer (USBASP)
Product Highlights
Works under multiple platforms. Linux, Mac OS X and Windows are tested.
No special controllers or smd components are needed.
Programming speed is up to 5kBytes/sec.
Planned: serial interface to target (e.g. for debugging).
Compatible with Windows XP, Windows Vista and Windows 7. Both 32bit and 64bit versions are supported.
SKU: RM000008
Relay Switch and Electronic Module
USB to TTL(Rx, Tx) Converter
Product Highlights
Fully compliant with USB Specification v1.1 and USB CDC v1.1.
Supports automatic handshake mode.
Supports Remote wake-up and power management .
256-bytes buffer each for upstream and downstream data flow .
Supports default ROM or external EEPROM for device configuration .
On-chip USB transceiver .
On-chip crystal oscillator running at 12MHz .
SKU: RM000010
Motion Light and Sound Sensor
Light Searching Sensor
Product Highlights
Sleek Design
Designed for Robosapiens Development Boards.
Can be interfaced with other Development Boards Like Arduino, Arm 7, Arm 9, Arm 11 etc. by using pin connectors.
Presence of sunlight can be detected using the Sensor.
SKU: RM000012
Motion Light and Sound Sensor
Sound Sensor
Product Highlights
Detection range up to 3 meters away.
Adjustable range of detection.
Single bit active – high output.
Built – in series resistor for compatibility with the microcontroller and other 3.3 V devices.
3 – pin SIP header make it ready to use for breadboard or Robomart?s Development Boards.
SKU: RM000018
Battery Accessories
Digital USB Mobile Power Charging Current Voltage Tester Meter Mini USB Charger Doctor Voltmeter Ammeter
-3%
Battery Accessories
Digital USB Mobile Power Charging Current Voltage Tester Meter Mini USB Charger Doctor Voltmeter Ammeter
Product Highlights
High quality, small sized, easy and convenient to carry.
It can measure current and voltage of the power supply equipment with USB port.
The voltage and current will be displayed circularly.
Plug and Play, no extra power supply needed.
SKU: RM000035
Trending products
Go to Trending productsAVR Development & Breakout Board
Atmega8 mini Robotics Development Board V4.0
Product Highlights
8Kbytes of In-System Self-programmable Flash program memory.
512Bytes EEPROM.
1Kbyte Internal SRAM.
5.0V – 24V.
Power Consumption at 4Mhz, 3V, 25?C.
Active: 3.6mA.
Idle Mode: 1.0mA.
Power-down Mode: 0.5?A
SKU: RM000006
AVR Development & Breakout Board
AVR USB Programmer (USBASP)
Product Highlights
Works under multiple platforms. Linux, Mac OS X and Windows are tested.
No special controllers or smd components are needed.
Programming speed is up to 5kBytes/sec.
Planned: serial interface to target (e.g. for debugging).
Compatible with Windows XP, Windows Vista and Windows 7. Both 32bit and 64bit versions are supported.
SKU: RM000008
Relay Switch and Electronic Module
USB to TTL(Rx, Tx) Converter
Product Highlights
Fully compliant with USB Specification v1.1 and USB CDC v1.1.
Supports automatic handshake mode.
Supports Remote wake-up and power management .
256-bytes buffer each for upstream and downstream data flow .
Supports default ROM or external EEPROM for device configuration .
On-chip USB transceiver .
On-chip crystal oscillator running at 12MHz .
SKU: RM000010
Motion Light and Sound Sensor
Light Searching Sensor
Product Highlights
Sleek Design
Designed for Robosapiens Development Boards.
Can be interfaced with other Development Boards Like Arduino, Arm 7, Arm 9, Arm 11 etc. by using pin connectors.
Presence of sunlight can be detected using the Sensor.
SKU: RM000012
Motion Light and Sound Sensor
Sound Sensor
Product Highlights
Detection range up to 3 meters away.
Adjustable range of detection.
Single bit active – high output.
Built – in series resistor for compatibility with the microcontroller and other 3.3 V devices.
3 – pin SIP header make it ready to use for breadboard or Robomart?s Development Boards.
SKU: RM000018
Battery Accessories
Digital USB Mobile Power Charging Current Voltage Tester Meter Mini USB Charger Doctor Voltmeter Ammeter
-3%
Battery Accessories
Digital USB Mobile Power Charging Current Voltage Tester Meter Mini USB Charger Doctor Voltmeter Ammeter
Product Highlights
High quality, small sized, easy and convenient to carry.
It can measure current and voltage of the power supply equipment with USB port.
The voltage and current will be displayed circularly.
Plug and Play, no extra power supply needed.
SKU: RM000035
Raspberry Pi Board & Accessories
2 Axis Pan Tilt Camera Mount for Camera/Sensors
Product Highlights
Material: Plastic.
Provision to add standard servo motors(sold separately)
Pan and tilt using simple PPM interface using RC servos with position control.
180 Degree of freedom on both axis.
SKU: RM000039
Popular Products
AVR Development & Breakout Board
Atmega8 mini Robotics Development Board V4.0
Product Highlights
8Kbytes of In-System Self-programmable Flash program memory.
512Bytes EEPROM.
1Kbyte Internal SRAM.
5.0V – 24V.
Power Consumption at 4Mhz, 3V, 25?C.
Active: 3.6mA.
Idle Mode: 1.0mA.
Power-down Mode: 0.5?A
SKU: RM000006
AVR Development & Breakout Board
AVR USB Programmer (USBASP)
Product Highlights
Works under multiple platforms. Linux, Mac OS X and Windows are tested.
No special controllers or smd components are needed.
Programming speed is up to 5kBytes/sec.
Planned: serial interface to target (e.g. for debugging).
Compatible with Windows XP, Windows Vista and Windows 7. Both 32bit and 64bit versions are supported.
SKU: RM000008
Relay Switch and Electronic Module
USB to TTL(Rx, Tx) Converter
Product Highlights
Fully compliant with USB Specification v1.1 and USB CDC v1.1.
Supports automatic handshake mode.
Supports Remote wake-up and power management .
256-bytes buffer each for upstream and downstream data flow .
Supports default ROM or external EEPROM for device configuration .
On-chip USB transceiver .
On-chip crystal oscillator running at 12MHz .
SKU: RM000010
Motion Light and Sound Sensor
Light Searching Sensor
Product Highlights
Sleek Design
Designed for Robosapiens Development Boards.
Can be interfaced with other Development Boards Like Arduino, Arm 7, Arm 9, Arm 11 etc. by using pin connectors.
Presence of sunlight can be detected using the Sensor.
SKU: RM000012
Motion Light and Sound Sensor
Sound Sensor
Product Highlights
Detection range up to 3 meters away.
Adjustable range of detection.
Single bit active – high output.
Built – in series resistor for compatibility with the microcontroller and other 3.3 V devices.
3 – pin SIP header make it ready to use for breadboard or Robomart?s Development Boards.
SKU: RM000018
Battery Accessories
Digital USB Mobile Power Charging Current Voltage Tester Meter Mini USB Charger Doctor Voltmeter Ammeter
-3%
Battery Accessories
Digital USB Mobile Power Charging Current Voltage Tester Meter Mini USB Charger Doctor Voltmeter Ammeter
Product Highlights
High quality, small sized, easy and convenient to carry.
It can measure current and voltage of the power supply equipment with USB port.
The voltage and current will be displayed circularly.
Plug and Play, no extra power supply needed.
SKU: RM000035
Raspberry Pi Board & Accessories
2 Axis Pan Tilt Camera Mount for Camera/Sensors
Product Highlights
Material: Plastic.
Provision to add standard servo motors(sold separately)
Pan and tilt using simple PPM interface using RC servos with position control.
180 Degree of freedom on both axis.
SKU: RM000039
