Free Delivery from $50
99% Positive Feedbacks
365 days for free return
Payment Secure System
Only Best Brands
Categories
Product Carousel Tabs
AVR Development & Breakout Board
Atmega8 mini Robotics Development Board V4.0
Product Highlights
8Kbytes of In-System Self-programmable Flash program memory.
512Bytes EEPROM.
1Kbyte Internal SRAM.
5.0V – 24V.
Power Consumption at 4Mhz, 3V, 25?C.
Active: 3.6mA.
Idle Mode: 1.0mA.
Power-down Mode: 0.5?A
SKU: RM000006
AVR Development & Breakout Board
AVR USB Programmer (USBASP)
Product Highlights
Works under multiple platforms. Linux, Mac OS X and Windows are tested.
No special controllers or smd components are needed.
Programming speed is up to 5kBytes/sec.
Planned: serial interface to target (e.g. for debugging).
Compatible with Windows XP, Windows Vista and Windows 7. Both 32bit and 64bit versions are supported.
SKU: RM000008
Relay Switch and Electronic Module
USB to TTL(Rx, Tx) Converter
Product Highlights
Fully compliant with USB Specification v1.1 and USB CDC v1.1.
Supports automatic handshake mode.
Supports Remote wake-up and power management .
256-bytes buffer each for upstream and downstream data flow .
Supports default ROM or external EEPROM for device configuration .
On-chip USB transceiver .
On-chip crystal oscillator running at 12MHz .
SKU: RM000010
Motion Light and Sound Sensor
Light Searching Sensor
Product Highlights
Sleek Design
Designed for Robosapiens Development Boards.
Can be interfaced with other Development Boards Like Arduino, Arm 7, Arm 9, Arm 11 etc. by using pin connectors.
Presence of sunlight can be detected using the Sensor.
SKU: RM000012
Motion Light and Sound Sensor
Sound Sensor
Product Highlights
Detection range up to 3 meters away.
Adjustable range of detection.
Single bit active – high output.
Built – in series resistor for compatibility with the microcontroller and other 3.3 V devices.
3 – pin SIP header make it ready to use for breadboard or Robomart?s Development Boards.
SKU: RM000018
Products Carousel
Television Entertainment
Music
Trending Products
Bestsellers
-
-
Jumper Wires Connectors FRC and Interfacing Cables
2×40 Pin 2mm Pitch Female Berg Strip – Break Away Header – Straight
Jumper Wires Connectors FRC and Interfacing Cables2×40 Pin 2mm Pitch Female Berg Strip – Break Away Header – Straight
Product Highlights:
- Connector: Header Strip
- Gender: Female
- Mounting Type: Through Hole
- Pin Spacing (mm): 2mm
- Contact Material: Phosphor Bronze
- Contact Resistance: 20m
- Insulation Material: PBT UL 94V-0
- Insulation Resistance (M); 1000
SKU: RM000958
Recommendation for your manager
AVR Development & Breakout Board
Atmega8 mini Robotics Development Board V4.0
Product Highlights
8Kbytes of In-System Self-programmable Flash program memory.
512Bytes EEPROM.
1Kbyte Internal SRAM.
5.0V – 24V.
Power Consumption at 4Mhz, 3V, 25?C.
Active: 3.6mA.
Idle Mode: 1.0mA.
Power-down Mode: 0.5?A
SKU: RM000006
AVR Development & Breakout Board
AVR USB Programmer (USBASP)
Product Highlights
Works under multiple platforms. Linux, Mac OS X and Windows are tested.
No special controllers or smd components are needed.
Programming speed is up to 5kBytes/sec.
Planned: serial interface to target (e.g. for debugging).
Compatible with Windows XP, Windows Vista and Windows 7. Both 32bit and 64bit versions are supported.
SKU: RM000008
Relay Switch and Electronic Module
USB to TTL(Rx, Tx) Converter
Product Highlights
Fully compliant with USB Specification v1.1 and USB CDC v1.1.
Supports automatic handshake mode.
Supports Remote wake-up and power management .
256-bytes buffer each for upstream and downstream data flow .
Supports default ROM or external EEPROM for device configuration .
On-chip USB transceiver .
On-chip crystal oscillator running at 12MHz .
SKU: RM000010
Motion Light and Sound Sensor
Light Searching Sensor
Product Highlights
Sleek Design
Designed for Robosapiens Development Boards.
Can be interfaced with other Development Boards Like Arduino, Arm 7, Arm 9, Arm 11 etc. by using pin connectors.
Presence of sunlight can be detected using the Sensor.
SKU: RM000012
Motion Light and Sound Sensor
Sound Sensor
Product Highlights
Detection range up to 3 meters away.
Adjustable range of detection.
Single bit active – high output.
Built – in series resistor for compatibility with the microcontroller and other 3.3 V devices.
3 – pin SIP header make it ready to use for breadboard or Robomart?s Development Boards.
SKU: RM000018
Battery Accessories
Digital USB Mobile Power Charging Current Voltage Tester Meter Mini USB Charger Doctor Voltmeter Ammeter
Battery Accessories
Digital USB Mobile Power Charging Current Voltage Tester Meter Mini USB Charger Doctor Voltmeter Ammeter
Product Highlights
High quality, small sized, easy and convenient to carry.
It can measure current and voltage of the power supply equipment with USB port.
The voltage and current will be displayed circularly.
Plug and Play, no extra power supply needed.
SKU: RM000035
Raspberry Pi Board & Accessories
2 Axis Pan Tilt Camera Mount for Camera/Sensors
Product Highlights
Material: Plastic.
Provision to add standard servo motors(sold separately)
Pan and tilt using simple PPM interface using RC servos with position control.
180 Degree of freedom on both axis.
SKU: RM000039
Your Recently Viewed Products
Electronic Switches Button and Keypads
12x12x12mm Tactile Push Button Switch-10Pcs.
Product Highlights
Through-hole design.
Shaft Shape: Round
Function: Push to ON
High operating force (3.0N or 3.6N) suited to automotive equipment requirements
The long life of 300,000 cycles realized despite the high operating force
Middle stroke (1.05mm)
SKU: RM016547
Logic Gate ICs
74LS75 4-Bit Bi-Stable Latch
Product Highlights
Operating Voltage Range 4.5V to 5V up to a maximum of5.5V.
Operating Temperature range : -55?C to +125?C.
VH (Output High): 2.7V to 3.4V.
VL (Output Low): 0.36V to 0.5V.
Power Consumption: 3.3mA to 3.8mA.
Operating Speed (Mhz):600-800.
SKU: RM000047
Relay Switch and Electronic Module
5V Dual Channel Relay Module with Optocoupler
Product Highlights
Low Level Trigger Relay Module
Two separate LEDs for On/Off indication of the Relay.
Triggering input voltage 3.3V ? 5V
Two separate LEDs for On/Off indication of the Relay
Triggering input voltage 3.3V ? 5V 4)
Back EMF protection
Back EMF protection 2 LEDs to indicate when relays are ON.
Works with logic level signals from 3.3V or 5V devices
Opto isolation circuitry
Module with diode current protection, short response time
AC Control Voltage: 250V @max.10A
DC Control Voltage: 30V @max. 10A
SKU: RM015143