All Categories
Your Cart




Availability: In stock

Brand: Generic

SKU: RM017739

₹ 427.00
Warehouse Code: R00000-S00-P00-Z00

Product Highlights

  • Operating Temperature: -40°C to +85°C
  • Data Rates: 3 Mbps
  • Mounting Style: SMD/SMT
  • Package/Case: SSOP-28
  •  Supply Voltage: 1.8 – 5.25 V
  • Operating Supply Current: 15 mA

This is FT232RNTUBE IC. The FTDI Chip has the FT232RNL which is a USB to serial UART interface with optional clock generator output, and the new FTDIChip-ID security dongle feature. The FT232RNL device is added to FTDI’s range of USB UART interface Integrated Circuit Devices.


  1. The product may vary in shape, color, and markings as compared to the image shown depending upon availability.
  2. Refer to datasheet in the ATTACHMENTS section for more info. regd. the product.


  1. Single chip USB to asynchronous serial data transfer interface.
  2. Entire USB protocol handled on the chip. No USB specific firmware programming required.
  3. Fully integrated 1024-bit EEPROM storing device descriptors and CBUS I/O configuration.
  4. Fully integrated USB termination resistors.
  5. Fully integrated clock generation with no external crystal required plus optional clock output selection enabling a glue-less interface to external MCU or FPGA.
  6. Data transfer rates from 300 baud to 3 Mbaud (RS422, RS485, RS232) at TTL levels.
  7. 128 bytes receive buffer and 256 bytes transmit buffer utilising buffer smoothing technology to allow for high data throughput.
  8. FTDI’s royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers eliminate the requirement for USB driver development in most cases.
  9. Unique USB FTDIChip-ID™ feature.
  10. Configurable CBUS I/O pins.
  11. Transmit and receive LED drive signals.
  12. UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity
*Note: Product may be differ as per shown in image