The EPC-CM4-70 (CS10600RA4070E) is an industrial computer for the Raspberry Pi® Compute Module 4. Available in embedded form-factor, the Industrial Pi features a 7-inch IPS display (1024×600 pixels and 500 nits of brightness) with a 5-point capacitive touch panel, and RS232 and RS485 ports, multiple opto-isolated I/O, Ethernet, double USB, 4G/LTE (optional), ZigBee function, double TF card, on-board audio, RTC with a backup battery, audio I/O, and power management. 

You can add a 4G/LTE module to the product, by choosing it in the optional modules section.

Note: Compute module does not come with this product you have to purchase it separately according to your need.

Features:

• The EPC-CM4-70 is full-featured, rugged, designed, and certified for industrial usage
• Ready to deploy industrial applications based around the Raspberry Pi Compute Module 4
• The Compute Module 4 appears in different versions depending on the size of the DDR4 and eMMC.
• The product has Raspberry Pi CPU, a high-performance Broadcom BCM2711 (RPi 4) application processor.
• The Industrial Pi has a 5-point capacitive touch screen, with a 1024×600 resolution
• Offers stable and accurate control over the device and great image clarity

Specifications:

• Model: EPC-CM4-70
• Form-factor: Embedded
• CPU: Broad-com BCM2711 (RPi 4)
• Display Size (inch.): 7.0″
• Resolution: 1024×600
• Brightness (NIT): 500 NIT
• Touch Screen: Capacitive
• FLASH: 16GB
• External storage: 2 TF card slots. One is designed for Lite version that has no eMMC. The other one is designed for storage expansion.
• WiFi/BT: Depends on the Compute Module 4 selected.
• ZIGBEE: Onboard Zigbee module (NOT mounted by default)
• 4G: Support miniPCIe slot for 4G/LTE module (neither miniPCIe Slot nor 4G LTE module is mounted by default.)
• Ethernet: 1x Giga LAN
• Camera: There is a camera connector compatible with the Raspberry Pi Camera connector (the camera is NOT mounted by default).
• Audio: 3.5mm Audio Out Connector, Internal 2W Speaker
• Buzzer: Yes
• USB: 1x miniUSB OTG, 2x USB 2.0 HOST
• RTC: High Accuracy RTC with Lithium Button Coin battery (Lithium Battery not included)
• GPIO: Opto-Isolated GPIO, 4 Input, 4 Output, can drive up to 500mA current every Channel at most (external power source needed)
• RS485: 2 Channels at most. The RS485 circuit controls the Input and Output direction automatically, there’s no need to control it from within the software.
• RS232: 4 Channels at most
• CAN: 1x CAN
• OS: Debian
• Power Input: 6~36V DC
• Power Consumption: 5W
• Current at 12V: 420 mA max
• Working Temperature: 0°C to +60°C
• Mounting Method: Embedded Mounting
• Weight: 400 g
• Dimensions: 190 × 107.8 × 27.7 mm