The Micro SD Card Adapter is a Micro SD card reader module, and the SPI interface via the file system driver, micro-controller system to complete the Micro SD card read and write files. Users can directly use the Arduino IDE comes with an SD card to complete the library card initialization and read-write.
Features of STM32F103C8T6 ARM STM32 Minimum System Development Board Module:
- ARM?32-bit Cortex?-M3 CPU Core.
- 72 MHz maximum frequency,1.25 DMIPS/MHz .
- 64 or 128 K bytes of Flash memory.
- 20 K bytes of SRAM.
- 2.0 to 3.6 V application supply and I/Os.
- 4-to-16 MHz crystal oscillator.
- Internal 8 MHz factory-trimmed RC.
- Internal 40 kHz RC.
- PLL for CPU clock.
- 32 kHz oscillator for RTC with calibration.
- 2 x 12-bit, 1?s A/D converters (up to 16 channels).
- 7-channel DMA controller.
- Peripherals supported: timers, ADC, SPIs, I2Cs and USARTs.
- 7 timers.
- Up to 2 x I2C interfaces (SMBus/PMBus).
- Up to 3 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control).
- Up to 2 SPIs (18 Mbit/s).
- CAN interface (2.0B Active).
- USB 2.0 full-speed interface.
- CRC calculation unit, 96-bit unique ID.
Applications of STM32F103C8T6 ARM STM32 Minimum System Development Board Module:
- Robotics projects.
- All types of electrical/electronic projects.
- DIY Projects requiring ARM processing unit.
Note: Images shown is only for representation. The actual product may vary with the picture shown.
Also Searched as: stm32f103c8t6 application, st microelectronics stm32f103c8t6, stm32f103c8t6 pin out, stm32f103c8t6 circuit, stm32f103c8t6 schematic, stm32f103c8t6 mcu, stm32f103rbt6 datasheet, stm32f103 datasheet pdf.
